Materials research and development for electrochemical sensors;Die bedeutung der materialentwicklung für elektrochemische sensoren

Technisches Messen

Volumn 77, Issue 1, 2010, Pages 5-18

  Vonau, Winfried ^a   Oelßner, Wolfram ^a   Zosel, Jens ^a   Kohler, Heinz ^b  

^a Institut für Mess und Sensortechnik e V Meinsberg

^b Hochschule Karlsruhe

Author keywords

Liquid electrolyte; Mixed potential electrode; Partly selective redox electrode; Reference electrode; References; REFET; Solid electrolyte sensor; Tin oxide gas sensor

Indexed keywords

LIQUID ELECTROLYTES; MIXED POTENTIAL; REDOX ELECTRODES; REFERENCE ELECTRODES; REFERENCES; REFET; TIN OXIDE GAS SENSORS;

ELECTROCHEMICAL SENSORS; GAS DETECTORS; LIQUIDS; METALLIC COMPOUNDS; SENSORS; SOLID ELECTROLYTES;

ELECTROCHEMICAL ELECTRODES;

EID: 77955046876     PISSN: 01718096     EISSN: None     Source Type: Journal    
DOI: 10.1524/teme.2010.0002     Document Type: Article

References (88)

1. Pure & Appl. Chem. 63(9), 1247-1255 (1991).
2. DIN 19263: pH-Mesung -pH-Messketten,DIN Deutsches Institut für Normung e.V. Beuth Verlag GmbH, Berlin Mai 2007.
3. W. Vonau, J. Gabel and H. Jahn: Potentiometric all-solid-state pH glass sensors, Electrochimica Acta 50, 4981-4987 (2005).
4. U. Guth, F. Gerlach, M. Decker, W. Oelßner and W. Vonau: Solidstate reference electrodes for potentiometric sensors, J. Solid State Electrochem. 13, 27-39 (2009).
5. R. G. Bates, H. P. Benetto, and M. Sankar: Dissociation Constants of Acetic Acid and Primary Phosphate Ion and Standards for pH in 10, 20 and 40wt-% Ethanol/Water Solvents at 25, 0, -5 and -10 °C, Anal. Chem. 52, 1598-1601 (1980).
6. H. Galster: pH-Messung, Weinheim 1990, S234.
7. NBS (USA), Letter Circular 993. 10.8.1950.
8. IUPAC. Compendium of Chemical Terminology, 2. Ausg. (the "Gold Book"), Compiled by A.D. McNaught and A. Wilkinson. Blackwell Scientific Publications, Oxford (1997).
9. K. Schwabe: pH-Messtechnik, Verlag Theodor Steinkopff Dresden and Leipzig 1963, S64-75.
10. H. Galster: pH-Messung, Weinheim 1990, S63-70.
11. A. Winsel: Wasserstoff-Stabelektrode mit integrierter Wasserstoffquelle, DE 41 12 784 (1991).
12. A. Winsel: Hydrogen rod electrode with integrated hydrogen source, US 5 407 555 (1992).
13. Dr. W. Ingold KG: Bezugselektrode oder Einstabmesskette, Utility patent G 8221797.1 (1982).
14. H. J. Brinkmann: Bezugselektrode oder Einstabmesskette, DE 3228647 (1982).
15. H. J. Brinkmann, H. W. Bühler and A. Lohrum: Measuring probe for the potentiometric determination of ion concentrations, US 4,959,138 (1990).
16. S. Murer: Method of manufacturing a reference electrode, US 2007/0009689 (2007).
17. W. Vonau, H. Kaden, M. Berthold, P. John and G. Steinrichter: Bezugselektrode für elektrochemische Messungen and Verfahren zu ihrer Herstellung, DE 19533059 (1995).
18. K. Stellmacher: Verfahren zur Herstellung eines Festkörper-Elektrolyten, DE 3942500 (1989).
19. T. H. Russel and D. Haaf: Referenzelektrode für die Ionenaktivitätsmessung, insbesondere für die pH-Wertmessung, EP 0247535 (1987).
20. H. Kaden, H. Jahn, M. Berthold, K. Jüttner, K.-M. Mangold and S. Schäfer: Polypyrrole as the Active Material for Potentiometric Sensors, Chem. Eng. Technol. 24, 1120-1124 (2001).
21. H. Kaden, H. Jahn and M. Berthold: Study of the glass/polypyrrole interface in an all-solid-state pH sensor, Solid State Ionics 169, 129-133 (2004).
22. H. Galster: pH-Messung, Weinheim 1990S. 94-96.
23. W. Vonau, W. Oelßner, J. Henze and U. Guth: An all-solid state reference electrode, Eurosensors XXII (2008), Proceedings, S689-692.
24. W. Vonau, W. Oelßner, U. Guth and J. Henze: An all-solidstate reference electrode, Sens. Actuators, B, Chem. (In Press, Corrected Proof, Available online 9 December 2008, doi:10.1016/ j.snb.2008.12.001).
25. I. Y. Huang, R. S. Huang and L. H. Lo: Improvement of integrated Ag/AgCl thin-film electrodes by KCl-gel coating for ISFET applications, Sens. Actuators, B, Chem. 94, 53-64 (2003).
26. M. Brischwein, S. Herrmann, W. Vonau, F. Berthold, H. Grothe, E. R. Motrescu and B. Wolf: Electric Cell-Substrate Impedance Sensing with Screen Printed Electrode Structures, Lab Chip 6, 819-823 (2006).
27. M. Chudy, W. Wroblewski and Z. Brzozka: Towards REFET, Sens. Actuators, B, Chem. 57, 47-50 (1999).
28. R. Lukowski, U. Guth and O. Schäf: Referenzelektrode. DE 198 23 056 A1 (1998).
29. H. Kohler, W. Neu, K.-D. Kreuer, D. Schmeisser and W. Göpel: La0.175WO3-perovskite: Chemical characterization of the single crystal (111)/aqueous solution interface by XPS/UPS, Electrochimica Acta 34(12), 1755-1761 (1989).
30. P. Shuk, U. Guth and M. Greenblatt: Ion selective sensors based on molybdenum bronzes, Solid State Electrochem. 8, 374-383 (2002).
31. J. Gabel, W. Vonau and U. Guth: Electrochemical sensors based on transition metal oxide bronzes, Ionics 9, 176-181 (2003).
32. J. Gabel, W. Vonau, P. Shuk and U. Guth: New reference electrodes based on tungsten-substituted molybdenum bronzes, Solid State Ionics 169, 75-80 (2004).
33. J. Gabel, W. Vonau and U. Guth: LixMo(1-y)WyO3 Bronzes as Electrochemical Sensors, Technical Digest, 10th Int. Meeting on Chemical Sensors, Tsukuba, Japan, Chemical Sensors 20 Suppl. B, 594-595 (2004).
34. J. Gabel: Elektrochemische Untersuchungen an Elektroden aus Übergangsmetalloxidbronzen, Dissertation, Technische Universität Dresden 2006.
35. F. Oehme: Ionenselektive Elektroden, Heidelberg 1986, S38.
36. W. Vonau and U. Guth: pH Monitoring, J. Solid State Electrochem. 10, 746-752 (2006).
37. H. Galster: pH-Messung, Weinheim 1990 S161-166.
38. G. Papeschi, S. Bordi, M. Carlà, L. Criscione and F. Ledda: An iridium-iridium oxide electrode for in vivo monitoring of blood pH changes, J. Medical Engineering & Technology 5(2), (1981).
39. W. Oelßner, H. Kaden, G. Köhler and B. Hegewald: Iridiumoxidelektrode zur Messung des pH-Wertes and Verfahren zu ihrer Herstellung, DE 44 30 662 (1994).
40. W. Habermann: Teilselektive Redoxelektroden zur Online-Messung von Oxidationsmitteln, Dissertation, Halle (1991).
41. W. Vonau, P. John and H. Kaden: Aufbringen chemisch sensitiver Schichten auf Metalle der 4.-6. Nebengruppe des PSE zur Herstellung von Messfühlern, Scientific Reports, J. Univ. of Appl. Sci. Mittweida 6, S25 (1998).
42. K. J. Vetter: Elektrochemische Kinetik, Berlin 1961, S24.
43. W. Vonau, H. Kaden and U. Enseleit: Oberflächenmodifizierung von Vanadium als Material für einen potentiometrischen H2O2-Sensor, Oberflächen-Polysurfaces 6, S10 (2000).
44. T. Bachmann, W. Vonau and P. John: Hydrogen Peroxide Concentration in Acid Etching Baths, journal GIT Laboratory Journal 7(3), S150 (2003).
45. T. Bachmann, W. Vonau and P. John: Study of the structure of passivated vanadiumtitanium alloys and their semiconductor properties, Anal. Bioanal. Chem. 374, 712-714 (2002).
46. T. Bachmann: Elektrochemische Untersuchungen von Oxidschichten auf Vanadium and Vanadiumlegierungen, Dissertation, Dresden (2007).
47. N. F. Mott: Trans. Faraday Soc. 43, S429 (1947).
48. W. Schmid, N. Barsan and U. Weimar: Sensing of hydrocarbons and CO in low oxygen conditions with tin dioxide sensors: possible conversion paths, Sens. Actuators, B, Chem. 103, 362-368 (2004).
49. K. Frank, H. Kohler and U. Guth: Influence of the measurement conditions on the sensitivity of SnO2 gas sensors operated thermocyclically, Sens. Actuators, B, Chem. 141, 361-369 (2009).
50. J. Frank and H. Meixner: Sensor system for indoor air monitoring using semiconducting metal oxides and IR-absorption, Sens. Actuators, B, Chem. 78, 298-302 (2001).
51. U. Weimar: Gas Sensing with Tin Oxide: Elementary Steps and Signal Transduction, Habilitation, Universität Tübingen (2001).
52. A. Cabot, J. Arbiol, J.R. Morante, U. Weimar, N. Barsan and W. Göpel: Analysis of noble metal additives introduced by impregnation of as obtained SnO2 sol-gel nanocrystals for gas sensors, Sens. Actuators, B, Chem. 70, 87-100 (2000).
53. E. Kanazawa, G. Sakai, K. Shimanoe, Y. Kanmura, Y. Teraoka, N. Miura and N. Yamazoe: Metal oxide semiconductor N2O sensor for medical use, Sens. Actuators, B, Chem. 77, 2-77 (2001).
54. A. Galdikas, A.Mironas and A. Setkus: Copper-doping level effect on sensitivity and selectivity of tin oxide thin-film gas sensors, Sens. Actuators, B, Chem. 26-27, 29-32 (1995).
55. A. Hetznecker, H. Kohler and U. Guth: Enhanced studies on the mechanism of gas selectivity and electronic interactions of SnO2/Na+ionic conductors, Sens. Actuators, B, Chem. 120, 378-385 (2007).
56. A. Hetznecker: Untersuchung der gassensitiven Eigenschaften von SnO2/NASICON-Kompositen, Dissertation, Technische Universität Dresden (2005).
57. A. Jerger, H. Kohler, F. Becker, H.-B. Keller and R. Seifert: New Applications of Tin Oxide Gas Sensors -II. Intelligent sensor system for reliable monitoring of ammonia leakages, Sens. Actuators, B, Chem. 81, 301-307 (2002).
58. K. Frank, V. Magapu, V. Schindler (†), H. Kohler, H. B. Keller and R. Seifert: Chemical analysis with tin oxide gas sensors: choice of additives, method of operation and analysis of numeric signal, 7th East Asian Conference on Chemical Sensors, Dec. 3-5, 2007, Singapore, Sensor Lett. 6, 908-911 (2008).
59. H. Ullmann: Keramische Gassensoren, Akademie Verlag, Berlin 1993, S11-16.
60. H.-H. Möbius: Solid-State Electrochemical Potentiometric Sensors for Gas Analysis. In: W. Göpel, J. Hesse and J.N. Zemel: Sensors, Vol. 3, VCH, Weinheim 1991, S1106-1152.
61. P. Shuk, E. Bailey and U. Guth: Zirconia Oxygen Sensor for the Process Application: State-of-the-Art, Sensors & Transducers 90, 174-184 (2008).
62. H. Heelemann, U. Guth, W. Zastrow and H.-H. Möbius: Betriebserfahrungen mit Festelektrolyt-Sonden zur Messung der Sauerstoffkonzentration im Abgas von Glasschmelzwannen, Silikattechnik (Berlin) 38, 224-227 (1987).
63. P. R. Laimböck, R. G.C. Beerkens and J. van der Schaaf: On-Line Redox Sensors in Industrial Glass Melting Tanks. In: J. Kieffer: 62nd Conference on Glass Problems: Ceramic Engineering and Science Proceedings 23, 2008, doi:10.1002/9780470294727.ch3.
64. V. Leonhard, U. Guth, H. Erdmann, M. Ilgenstein, H. Köppen and D. Fischer: Solid electrolyte sensor for measuring gaseous anhydrides, European Patent EP0783689, 2000.
65. U. Guth, P. Schmidt and H.-H. Möbius: Kontinuierliche potentiometrische SO2-Bestimmungen in Luft mit Hilfe galvanischer Festelektrolytzellen, Z. Chem. 28, 343-344 (1988).
66. E. Girdauskaite, H. Ullmann, V. Vashook, M. Bülow and U. Guth: Ceramic oxides with high oxygen exchange. The system Sr-Co-O, Solid State Ionics 177, 1831-1835 (2006).
67. E. L. Brosha, R. Mukandan, D. R. Brown, F. H. Garzon, J.H. Visser, M. Zanini, Z. Zhou and E. M. Logothetis: CO/HC sensors based on thin films of LaCoO3 and La0.8Sr0.2CoO3-δ metal oxides, Sens. Actuators, B, Chem. 69, 171-182 (2000).
68. S. Thiemann, R. Hartung, H. Wulff, J. Klimke, H.-H. Möbius, U. Guth and U. Schönauer: Modified Au/YSZ electrodes -preparation, characterization and electrode behaviour at higher temperatures, Solid State Ionics 86-88, 873-876 (1996).
69. V. Vashook, R. Müller, J. Zosel, K. Ahlborn, H. Ullmann and U. Guth: Catalytic and Electrical Properties of SOFC Anode Material Based on Lanthan-Chromite-Titanate. Materialwissenschaft and Werkstofftechnik 33, 335-338 (2002).
70. S. Zhuiykov: Electrochemistry of zirconia gas sensors, CRC press, Boca Raton, 2007, S254.
71. S. Ziesche, R. Jurk, N. Trofimenko and M. Kusnezoff: Permeation and oxygen exchange of Ln2Ni0.8Cu0.2O4-materials (Ln=La, Pr, Nd), Solid State Ionics 179, 1351-1353 (2008).
72. D. Westphal, S. Jakobs and U. Guth: Gold-Composite Electrodes for Hydrocarbon Sensors Based on YSZ Solid Electrolyte, Ionics 7, 182-186 (2001).
73. E. Girdauskaite, H. Ullmann, V. Vashook, U. Guth, G. B. Caraman, E. Bucher and W. Sitte: Oxygen transport properties of Ba0.5Sr0.5Co0.8Fe0.2O3-x and Ca0.5Sr0.5Mn0.8Fe0.2O3-x obtained from permeation and conductivity relaxation experiments, Solid State Ionics 179, 385-392 (2008).
74. J. Zosel, D. Westphal, S. Jakobs, R. Müller and U. Guth: Au/Oxide Composites as HC Sensitive Electrode Material for Mixed Potential Gas Sensors, Solid State Ionics 152-153, 525-529 (2002).
75. J. Zosel, D. Franke, K. Ahlborn, F. Gerlach, V. Vashook and U. Guth: Perovskite related electrode materials with enhanced NO sensitivity for mixed potential sensors, Solid State Ionics 179, 1628-1631 (2008).
76. P. Elumalai and N. Miura: Performances of planar NO2 sensor using stabilized zirconia and NiO sensing electrode at high temperature, Solid State Ionics 176, 2517-2522 (2005).
77. G. Hagen, A. Dubbe, G. Fischerauer and R. Moos: Thick-film impedance based hydrocarbon detection based on chromium(III) oxide/zeolite interfaces, Sens. Actuators, B, Chem. 118, 73-77 (2006).
78. R. Müller, J. Zosel, K. Ahlborn and U. Guth: Investigations on selected gallium and strontium doped lanthanum chromites as electrode materials for HC detection, Ionics 8, 262-266 (2002).
79. V. Vashook, L. Vasylechko, J. Zosel, W. Gruner, H. Ullmann and U. Guth: Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1-xCaxCr1-yTiyO3-δ (x=0 -1, y= 0 -1), J. Solid State Chem. 177, 3784-3794 (2004).
80. N. Miura, T. Raisen, G. Lu and N. Yamazoe: Highly selective CO sensor using stabilized zirconia and a couple of oxide electrodes, Sens. Actuators, B, Chem. 47, 84-91 (1998).
81. S. Käding, S. Jakobs and U. Guth: YSZ-cells for potentiometric nitric oxide sensors, Ionics 9, 151-154 (2003).
82. E. L. Brosha, R. Mukandan, R. D. Brown and F. H. Garzon: Mixed potential sensors using lanthanum manganate and terbium yttrium zirconium oxide electrodes, Sens. Actuators, B, Chem. 87, S. 47 (2002).
83. P. Elumalai, J. Zosel, U. Guth and N. Miura: NO2 sensing properties of YSZ-based sensor using NiO and Cr-doped NiO sensing electrodes at high temperature, Ionics 15, 405-411 (2009).
84. R.Wama,M. Utiyama, V. V. Plashnitsa and N. Miura: Highly sensitive impedance-based propene sensor using stabilized zirconia and zinc oxide sensing-electrode, Electrochemistry Communications 9, 2774-2777 (2007).
85. J. Zosel, G. Schiffel, F. Gerlach, K. Ahlborn, U. Sasum, V. Vashook and U. Guth: Electrode materials for potentiometric hydrogen sensors, Solid State Ionics 177, 2301-2304 (2006).
86. P. Shuk, E. Bailey, J. Zosel and U. Guth: New advanced in situ carbon monoxide sensor for the process application, Ionics 15, 131-138 (2009).
87. J. Zosel, D. Tuchtenhagen, K. Ahlborn and U. Guth: Mixed potential gas sensor with short response time, Sens. Actuators, B, Chem. 130, 326-329 (2008).
88. P. Schmidt-Zhang, W.-F. Zhang, F. Gerlach, K. Ahlborn and U. Guth: Electrochemical investigations on multi-metallic electrodes for amperometric NO gas sensors, Sens. Actuators, B, Chem. 108, 797-802 (2005).