On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion

Corrosion Science

Volumn 52, Issue 7, 2010, Pages 2469-2480

  Wong, H S ^a   Zhao, Y X ^b   Karimi, A R ^a   Buenfeld, N R ^a   Jin, W L ^b  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b ZHEJIANG UNIVERSITY   (China)

Author keywords

A. Steel reinforced concrete; B. Modelling studies; B. SEM; C. Interfaces; C. Rust

Indexed keywords

AIR VOIDS; CEMENT PASTE; CHLORIDE INDUCED CORROSION; CORROSION PRODUCTS; COVER CRACKING; HYDRATION PRODUCTS; INDUCED DAMAGE; MODELLING STUDIES; MODELLING TIME; REINFORCING STEELS; SEM; STEEL REINFORCED CONCRETE; STEEL-CONCRETE INTERFACE;

CEMENTS; COLUMNS (STRUCTURAL); CONCRETE BUILDINGS; CORROSION; HYDRATION; IMAGE ANALYSIS; OIL WELL CEMENTING; REINFORCED CONCRETE; SLAGS; SODIUM CHLORIDE;

CONCRETE PRODUCTS;

EID: 77954861246     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2010.03.025     Document Type: Article

References (49)

1. Talbot D., Talbot J. Corrosion Science and Technology 1998, CRC Press, London.
2. Bentur A., Diamond S., Berke N.S. Steel Corrosion in Concrete. Fundamentals and Civil Engineering Practice 1997, Taylor & Francis.
3. Bertolini L., Elsener B., Pedeferri P., Polder R. Corrosion of Steel in Concrete 2004, Wiley.
4. ACI Committee 222, Protection of metals in concrete against corrosion, ACI 222R-01, ACI Manual of Concrete Practice, 2005.
5. Broomfield J.P. Corrosion of steel in concrete, understanding, investigation and repair 2007, Taylor & Francis, London. second ed.
6. Sagoe-Crentsil K.K., Glasser F.P. Steel in concrete: part I. A review of the electrochemical and thermodynamic aspects. Mag. Concr. Res. 1989, 41:205-212.
7. Glasser F.P., Sagoe-Crentsil K.K. Steel in concrete: part II. Electron microscopy analysis. Mag. Concr. Res. 1989, 41:213-220.
8. Foley R.T. Role of chloride ion in iron corrosion. Corrosion 1970, 26:58-70.
9. Sagoe-Crentsil K.K., Glasser F.P. 'Green corrosion products', iron solubility and the role of chloride in the corrosion of steel at high pH. Cem. Concr. Res. 1993, 23:785-791.
10. Allan M.L. Probability of corrosion induced cracking in reinforced concrete. Cem. Concr. Res. 1995, 25:1179-1190.
11. Alonso C., Andrade C., Rodriguez J., Diez J.M. Factors controlling cracking of concrete affected by reinforcement corrosion. Mater. Struct. 1998, 31:435-441.
12. Liu Y.P., Weyers R.E. Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures. ACI Mater. J. 1998, 95:675-681.
13. Bhargava K., Ghosh A.K., Mori Y., Ramanujam S. Modeling of time to corrosion-induced cover cracking in reinforced concrete structures. Cem. Concr. Res. 2005, 35:2203-2218.
14. Chen D., Mahadevan S. Chloride-induced reinforcement corrosion and concrete cracking simulation. Cem. Concr. Comp. 2008, 30:227-238.
15. Petre-Lazar I., Gérard B. Mechanical behaviour of corrosion products formed at the steel-concrete interface. Testing and Modelling, EM2000 Proceedings of the 14th Engineering Mechanics Conference 2000, ASCE, Austin, Texas.
16. Suda K., Misra S., Motohashi K. Corrosion products of reinforcing bars embedded in concrete. Corros. Sci. 1993, 35:1543-1549.
17. Constantinou A.G., Scrivener K.L. Microstructural examination of the development of corrosion in reinforced concrete. Mechanisms of Chemical Degradation of Cement-based Systems 1995, 134-142. E & FN Spon, London. K.L. Scrivener, J.F. Young (Eds.).
18. Aligizaki A.K., de Rooij M.R., Macdonald D.D. Analysis of iron oxides accumulating at the interface between aggregates and cement paste. Cem. Concr. Res. 2000, 30:1941-1945.
19. Duffó G.S., Morris W., Raspini I., Saragovi C. A study of steel rebars embedded in concrete during 65years. Corros. Sci. 2004, 46:2143-2157.
20. Poupard O., L'Hostis V., Catinaud S., Petre-Lazar I. Corrosion damage prognosis of a reinforced concrete beam after 40years natural exposure in marine environment. Cem. Concr. Res. 2006, 36:504-520.
21. Marcotte T.D., Hansson C.M. Corrosion products that form on steel within cement paste. Mater. Struct. 2007, 40:325-340.
22. Caré S., Nguyen Q.T., L'Hostis V., Berthaud Y. Mechanical properties of the rust layer induced by impressed current method in reinforced mortar. Cem. Concr. Res. 2008, 38:1079-1091.
23. Chitty W.-J., Dillmann P., L'Hostis V., Lombard C. Long-term corrosion resistance of metallic reinforcements in concrete-a study of corrosion mechanisms based on archaeological artefacts. Corros. Sci. 2005, 47:1555-1581.
24. L'Hostis V., Foct F., Dillmann P. Corrosion behaviour of reinforced concrete: laboratory experiments and archaeological analogues for long-term predictive modeling. J. Nucl. Mater. 2008, 379:124-132.
25. A.M. Harrisson, N.B. Winter, H.F.W. Taylor, An examination of some pure and composite cement pastes using scanning electron microscopy with X-ray analytical capability, in: Eighth International Congress on the Chemistry of Cement, Rio De Janeiro, 1986, pp. 170-175.
26. Wong H.S., Buenfeld N.R. Monte Carlo simulation of electron-solid interactions in cement-based materials. Cem. Concr. Res. 2006, 36:1076-1082.
27. Pouchou J., Pichoir F. Electron Probe Quantitation 1991, Plenum Press, New York.
28. Harrisson A.M., Winter N.B., Taylor H.F.W. X-ray microanalysis of microporous materials. J. Mater. Sci. Lett. 1987, 6:1339-1340.
29. Kjellsen K.O., Atlassi E.H. X-ray microanalysis of hydrated cement: is the analysis total related to porosity?. Cem. Concr. Res. 1998, 28:161-165.
30. Famy C., Scrivener K.L., Crumbie A.K. What causes differences of C-S-H gel grey levels in backscattered electron images?. Cem. Concr. Res. 2002, 32:1465-1471.
31. Cook D.C. Spectroscopic identification of protective and non-protective corrosion coatings on steel structures in marine environments. Corros. Sci. 2005, 47:2250-2570.
32. Chitty W.-J., Berger P., Dillmann P., L'Hostis V. Long-term corrosion of rebars embedded in aerial and hydraulic binders-mechanisms and crucial physico-chemical parameters. Corros. Sci. 2008, 50:2117-2123.
33. Gallias J.L. Microstructure of the interfacial transition zone around corroded reinforcement. The Interfacial Transition Zone in Cementitious Composites 1998, 171-178. E & FN Spon, London. A. Katz, A. Bentur, M. Alexander, G. Arliquie (Eds.).
34. Richardson I.G. The nature of C-S-H in hardened cements. Cem. Concr. Res. 1999, 29:1131-1147.
35. Famy C., Brough A.R., Taylor H.F.W. The C-S-H gel of Portland cement mortars: part 1. The interpretation of energy-dispersive X-ray microanalysis from scanning electron microscopy, with some observations on C-S-H, AFm and Aft phase compositions. Cem. Concr. Res. 2003, 33:1389-1398.
36. Taylor H.F.W., Newbury D.E. An electron microprobe study of a mature cement paste. Cem. Concr. Res. 1984, 14:565-573.
37. Harrisson A.M., Winter N.B., Taylor H.F.W. Microstructure and microchemistry of slag cement pastes. Mater. Res. Soc. Symp. Proc. 1987, 85:213-222.
38. Barker A.P. An electron optical examination of zoning in blastfurnace slag hydrates: part 1. Slag cement pastes at early ages. Adv. Cem. Res. 1989, 2:171-179.
39. Taylor H.F.W., Mohan K., Moir G.K. Analytical study of pure and extended Portland cement pastes: II fly ash- and slag-cement pastes. J. Am. Ceram. Soc. 1985, 68:685-690.
40. Escalante-Garcia J.I., Sharp J.H. The chemical composition and microstructure of hydration products in blended cements. Cem. Concr. Compos. 2004, 26:967-976.
41. Wong H.S., Zobel M., Buenfeld N.R., Zimmerman R.W. Influence of the interfacial transition zone and microcracking on the diffusivity, permeability and sorptivity of cement-based materials after drying. Mag. Concr. Res. 2009, 61:571-589.
42. Glass G.K., Reddy B., Buenfeld N.R. Corrosion inhibition in concrete arising from its acid neutralisation capacity. Corros. Sci. 2000, 42:1587-1598.
43. Glass G.K., Reddy B., Buenfeld N.R. The participation of bound chloride in passive film breakdown on steel in concrete. Corros. Sci. 2000, 42:2013-2021.
44. Gégout P., Revertégat E., Moine G. Action of chloride ions on hydrated cement pastes: influence of the cement type and long time effect of the concentration of chlorides. Cem. Concr. Res. 1992, 22:451-457.
45. Delagrave A., Pigeon M., Marchand J., Revertegat E. Influence of chloride ions and pH level on the durability of high performance cement pastes (part II). Cem. Concr. Res. 1996, 26:749-760.
46. Revertégat E., Richet C., Gégout P. Effect of pH on the durability of cement pastes. Cem. Concr. Res. 1992, 22:259-272.
47. Bentz D.P., Garboczi E.J. Modelling the leaching of calcium hydroxide from cement paste: effect on pore space percolation and diffusivity. Mater. Struct. 1992, 25:523-533.
48. R.D. Browne, Mechanism of corrosion of steel in concrete in relation to design, inspection, and repair of offshore and coastal structures, in: V.M. Malhotra (Ed.), Performance of Concrete in Marine Environments, ACI SP-65, 1980, pp. 169-204.
49. Andrade C., Alonso C., Molina F.J. Cover cracking as a function of bar corrosion: Pt 1. Experimental test. Mater. Struct. 1993, 26:453-464.