Effects of HVOF process parameters on the properties of Ni-Cr coatings

Journal of Thermal Spray Technology

Volumn 19, Issue 3, 2010, Pages 521-530

  Saaedi, J ^a,b   Coyle, T W ^a   Arabi, H ^b   Mirdamadi, S ^b   Mostaghimi, J ^a  

^a UNIVERSITY OF TORONTO   (Canada)

^b IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

Fuel to oxygen ratio; HVOF; Ni Cr coatings; Oxide content; Spraying distance

Indexed keywords

GAS COMBUSTION; HIGH VELOCITY OXY-FUEL; HVOF PROCESS; NI-50CR; NI-CR COATINGS; OIL REFINERIES; OXIDE CONTENTS; OXYGEN FLOW RATES; POROSITY LEVEL; POWDER PARTICLES; PROCESSING PARAMETERS; SPRAYING DISTANCE; STATISTICAL DESIGN OF EXPERIMENTS; UNMELTED PARTICLES;

CHROMIUM; DESIGN OF EXPERIMENTS; FUELS; HARDENING; INDUSTRIAL RESEARCH; MARINE BOILERS; METAL REFINERIES; OXYGEN; PETROLEUM REFINERIES; SPRAYED COATINGS; STAINLESS STEEL;

CHROMATE COATINGS;

EID: 77954758419     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-009-9464-5     Document Type: Conference Paper

References (27)

1. D.A. Shifler and L.K. Kohler, Hot Corrosion Resistance and Thermal Stability of High Chromium-Nickel Alloys, Presented at and Published in Proceedings of the NACE International Annual Conference CORROSION/2000, Paper no. 242, NACE, Houston, Texas, 2000.
2. "Standard Specification for Casting, Chromium-Nickel Alloys, A560," Annual Book of ASTM Standards, ASTM, 2000.
3. J.R. Davis, Ed., Heat-Resistant Materials: ASM Specialty Handbook, ASM, Materials Park, OH, 1997, p 383-384.
4. H.L. Holland, Practical Experience with Countering Metal Dusting in a Methane Reforming Unit, Presented at and Published in Proceedings of the NACE International Annual Conference CORROSION/2001, Paper No. 1385, NACE, Houston, TX, 2001.
5. T. Sundararajan, S. Kuroda, and F. Abe, Effect of Thermal Spray on the Microstructure and Adhesive Strength of High-Velocity Oxy-Fuel-Sprayed Ni-Cr Coatings on 9Cr-1Mo Steel, Metall. Mater. Trans. A, 2004, 35(10), p 3187-3199.
6. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Studies on the Properties of High-Velocity Oxy-Fuel Thermal Spray Coatings for Higher Temperature Applications, Mater. Sci., 2005, 41(6), p 805- 823.
7. E. Turunen, "Diagnostic Tools for HVOF Process Optimization," Ph.D. Thesis, Helsinki University of Technology, 2005.
8. D. Cheng, Q. Xu, E.J. Lavernia, and G. Trapaga, The Effect of Particle Size and Morphology on the In-Flight Behavior of Particles During High-Velocity Oxy-Fuel Thermal Spraying, Metall. Mater. Trans., 2001, B32(3), p 525-535.
9. M.A. Uusitalo, P.M.J. Vuoristo, and T.A. Mäntylä, High Temperature Corrosion of Coatings and Boiler Steels in Reducing Chlorine-Containing Atmosphere, Surf. Coat. Technol., 2002, 161(2-3), p 275-285.
10. T. Keller, W. Wagner, J. Ilavsky, J. Pisacka, G. Barbezat, and P. Fiala, Microstructure-Property Relationships and Cross- Property-Correlations of Thermal Sprayed Ni-Alloy Coatings, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p 643-652.
11. J.R. Davis, Ed., Handbook of Thermal Spray Technology, Thermal Spray Society, ASM International, OH, 2004, p 338.
12. F. Azarmi, T.W. Coyle, and J. Mostaghimi, Optimization of Atmospheric Plasma Spray Process Parameters using a Design of Experiment for Alloy 625 coatings, J. Therm. Spray Tech., 2008, 17(1), p 144-155.
13. P. Fauchais, A. Vardelle, and B. Dussoubs, Quo Vadis Thermal Spraying?, J. Therm. Spray Tech., 2001, 10(1), p 44-66.
14. H. Zhang, X.Y. Wang, L.L. Zheng, and X.Y. Jiang, Studies of Splat Morphology and Rapid Solidification During Thermal Spraying, Int. J. Heat Mass Trans., 2001, 44(24), p 4579- 4592.
15. J. Saaedi, T.W. Coyle, S. Mirdamadi, H. Arabi, and J. Mostaghimi, Phase Formation in a Ni-50Cr HVOF Coating, Surf. Coat. Technol., 2008, 202(24), p 5804-5811.
16. R.K. Roy, Chapter 6, A Primer on the Taguchi Method, Society of Manufacturing Engineers (Dearborn, MI), 1990, p 100-125.
17. V. Higuera, F.J. Belzunce, A. Carriles, and S. Poveda, Influence of the Thermal-Spray Procedure on the Properties of a Nickel- Chromium Coating, J. Mater. Sci., 2002, 37(3), p 649-654.
18. E. Lugscheider, C. Herbst, and L. Zhao, Parameter studies on high-velocity oxy-fuel spraying of MCrAlY coatings, Surf. Coat. Technol., 1998, 108-109(1-3), p 16-23.
19. A.D. Hewitt, Technology of Oxy-Fuel Gas Processes; Part 2: Comparative Combustion Properties of Fuel Gases, Weld. Met. Fab., 1972, 40, p 382-390.
20. H.H. Tawfik and F. Zimmerman, Mathematical Modeling of the Gas and Powder Flow in HVOF Systems, J. Therm. Spray Technol., 1997, 6(3), p 345-352.
21. M. Li and P.D. Christofides, Multi-Scale Modeling and Analysis of an Industrial HVOF Thermal Spray Process, Chem. Eng. Sci., 2005, 60, p 3649-3669. (Pubitemid 40572803)
22. C.M. Hackett and G.S. Settles, Turbulent Mixing of the HVOF Thermal Spray and Coating Oxidation, Thermal Spray Industrial Applications, C.C. Bernt and S. Sampath, Ed., ASM Intentional, Boston, OH, USA, 1994, p 307-312.
23. R.A. Neiser, M.F. Smith, and R.C. Dykhuizen, Oxidation in Wire HVOF-Sprayed Steel, J. Therm. Spray Technol., 1998, 7(4), p 537-545.
24. K. Dobler, H. Kreye, and R. Schwetzke, Oxidation of Stainless Steel in the High Velocity Oxy-Fuel Process, J. Therm. Spray Technol., 2000, 9(3), p 407-413.
25. K. Korpiola, "High Temperature Oxidation of Metal, Alloy and Cermet Powders in HVOF Spraying Process," Ph.D. Thesis, Helsinki University of Technology, 2004, p 81.
26. J. He, M. Ice, and E. Lavernia, Particle Melting Behavior During High-Velocity Oxygen Fuel Thermal Spraying, J. Therm. Spray Technol., 2001, 10(1), p 83-93. (Pubitemid 32426990)
27. J.F. Li, H.L. Liao, C.X. Ding, and C. Coddet, Optimizing the Plasma Spray Process Parameters of Yttria Stabilized Zirconia Coatings Using a Uniform Design of Experiments, J. Mater. Process. Technol., 2005, 160(1), p 34-42.