Microstructural characteristics of glass bead-and wollastonite-filled isotactic-polypropylene composites modified with thermoplastic elastomers

Polymer Composites

Volumn 31, Issue 7, 2010, Pages 1265-1284

  Balkan, Onur ^a   Ezdeşir, Ayhan ^b   Demirer, Halil ^a  

^a MARMARA UNIVERSITY   (Turkey)

^b Petkim Petrochemical Holding Inc   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

BINARY COMPOSITES; CORE-SHELL; ELASTOMER PARTICLES; ESTERIFICATION REACTIONS; FILLER PARTICLES; FOURIER TRANSFORM INFRARED; GLASS BEAD; INTERFACIAL ADHESIONS; ISOTACTICS; MATRIX; MELT FLOW RATE; MICROSTRUCTURAL CHARACTERISTICS; POLYPROPYLENE COMPOSITE; RIGID FILLERS; SEBS-G-MA; SEM; SEM ANALYSIS; SEM OBSERVATION; TERNARY COMPOSITES; TWO PHASE SYSTEMS; WELL-DISPERSED;

ADHESION; BLOCK COPOLYMERS; BUTENES; COPOLYMERIZATION; DIFFERENTIAL SCANNING CALORIMETRY; ESTERIFICATION; ESTERS; ETHYLENE; FILLED POLYMERS; FILLERS; FOURIER TRANSFORMS; GLASS; GRANULAR MATERIALS; MALEIC ANHYDRIDE; MICROSTRUCTURE; POLYPROPYLENES; REINFORCED PLASTICS; RUBBER; SCANNING ELECTRON MICROSCOPY; SILICATE MINERALS; STYRENE; WAVELET TRANSFORMS;

THERMOPLASTIC ELASTOMERS;

EID: 77954334372     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.20948     Document Type: Article

References (118)

1. D.B. Todd, Plastics Compounding: Equipment and Processing, Carl Hanser Verlag, Munich, 1 (1998).
2. H.S. Katz, "Solid Spherical Fillers," in Handbook of Fillers for Plastics, H.S. Katz and J.V. Milewski, Eds., Van Nostrand Reinhold, New York, 429 (1987).
3. M. Cambelova and A. Juck, Occup. Environ. Med., 51, 343 (1994).
4. D. Sekutowski, "Wollastonite," in Plastics Additives and Modifiers Handbook, J. Edenbaum, Ed., Chapman & Hall, London, 547 (1996).
5. N.I. Demidenko, L.I. Podzorova, V.S. Rozanova, V.A. Skorokhodov, and V.Ya. Shevchenko, Glass Ceram., 58, 308 (2001).
6. V.A. Matonis, "An Analytical Evaluation of a Hypothetical Three-Phase Material," Ph.D. Thesis, The University of Connecticut, Connecticut (1967).
7. V.A. Matonis and N.C. Small, Polym. Eng. Sci., 9, 90 (1969).
8. J. Kolarik, F. Lednicky, J. Jancar, and B. Pukanszky, Polym. Commun., 31, 201 (1990).
9. J. Kolarik and J. Jancar, Polymer, 33, 4961 (1992).
10. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 29, 4651 (1994).
11. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 30, 1601 (1995).
12. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 30, 2438 (1995).
13. Y. Long and R.A. Shanks, J. Appl. Polym. Sci., 61, 1877 (1996).
14. Y. Long and R.A. Shanks, J. Appl. Polym. Sci., 62, 639 (1996).
15. R.A. Shanks and Y. Long, Polym. Networks Blends, 7, 87 (1997).
16. K. Premphet and P. Horanont, J. Appl. Polym. Sci., 76, 1929 (2000).
17. J.E. Stamhuis, Polym. Compos., 5, 202 (1984).
18. J.E. Stamhuis, Polym. Compos., 9, 72 (1988).
19. J.E. Stamhuis, Polym. Compos., 9, 280 (1988).
20. M. Denac, I. Smit, and V.Musil, Compos. A, 36, 1094 (2005).
21. F. Stricker and R. Mülhaupt, J. Appl. Polym. Sci., 62, 1799 (1996).
22. P.R. Hornsby and K. Premphet, J. Mater. Sci., 32, 4767 (1997).
23. F. Stricker and R. Mülhaupt, Polym. Eng. Sci., 38, 1463 (1998).
24. F. Stricker, C. Friedrich, and R. Mülhaupt, J. Appl. Polym. Sci., 69, 2499 (1998).
25. D.E. Mouzakis, F. Stricker, R. Mülhaupt, and J. Karger-Kocsis, J. Mater. Sci., 33, 2551 (1998).
26. J.Z. Liang, R.K.Y. Li, and S.C. Tjong, Polym. Compos., 20, 413 (1999).
27. J.Z. Liang, R.K.Y. Li, and S.C. Tjong, Polym. Eng. Sci., 40, 2105 (2000).
28. O. Balkan, "The Effect of Thermoplastic Elastomers on the Mechanical Properties of Polypropylene Composites," Ph.D. Thesis, Marmara University, Istanbul, Türkiye (2006).
29. S.-C. Wong and Y.-W. Mai, Polym. Eng. Sci., 39, 356 (1999).
30. S.C. Tjong, S.-A. Xu, R.K.Y. Li, and Y.W. Mai, Polym. Int., 51, 1248 (2002).
31. S.C. Tjong, S.-A. Xu, and Y.-W. Mai, J. Polym. Sci. Part B: Polym. Phys., 40, 1881 (2002).
32. S.C. Tjong, S.-A. Xu, R.K.Y. Li, and Y.-W. Mai, J. Appl. Polym. Sci., 86, 1303 (2002).
33. S.C. Tjong, S.-A. Xu, R.K.-Y. Li, and Y.-W. Mai, Compos. Sci. Technol., 62, 831 (2002).
34. S.C. Tjong, S.A. Xu, and Y.-W. Mai, J. Appl. Polym. Sci., 88, 1384 (2003).
35. S.C. Tjong, S.-A. Xu, R.K.Y. Li, and Y.-W. Mai, J. Appl. Polym. Sci., 87, 441 (2003).
36. I. Smit, V. Musil, and I. Svab, J. Appl. Polym. Sci., 91, 4072 (2004).
37. I. Svab, V. Musil, I. Smit, and M. Makarovic, Polym. Eng. Sci., 47, 1873 (2007).
38. I. Svab, V. Musil, T. Jurkin, and I. Smit, Polym. Eng. Sci., 47, 2145 (2007).
39. X.L. Xie, K.L. Fung, R.K.Y. Li, S.C. Tjong, and Y.-W. Mai, J. Polym. Sci. Part B: Polym. Phys., 40, 1214 (2002).
40. K. Oksman and C. Clemons, J. Appl. Polym. Sci., 67, 1503 (1998).
41. H. Nitz, P. Reichert, H. Römling, and R. Mülhaupt, Macromol. Mater. Eng., 276/277, 51 (2000).
42. J. Wu, D. Yu, C.-M. Chan, J. Kim, and Y.-W. Mai, J. Appl. Polym. Sci., 76, 1000 (2000).
43. G. Holden, N.R. Legge, R. Quirk, and H.E. Schroeder, "Styrenic Thermoplastic Elastomers," in Thermoplastic Elastomers, G. Holden, N.R. Legge, R. Quirk, and H.E. Schroeder, Eds., Carl Hanser Verlag, Munich, 47 (1996).
44. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 29, 1595 (1984).
45. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 29, 3513 (1984).
46. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 29, 1079 (1984).
47. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 30, 1777 (1985).
48. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 30, 1799 (1985).
49. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 31, 535 (1986).
50. Y. Shimomura, K. Mori, and O. Kojima, U.S. Patent, 4,871,805 (1989).
51. K.R. Srinivasan and A.K. Gupta, J. Appl. Polym. Sci., 53, 1 (1994).
52. S. Setz, F. Stricker, J. Kressler, T. Duschek, and R. Mü lhaupt, J. Appl. Polym. Sci., 59, 1117 (1996).
53. R.A. Shanks, Polym. Compos., 5, 541 (1997).
54. F. Stricker, Y. Thomann, and R. Mülhaupt, J. Appl. Polym. Sci., 68, 1891 (1998).
55. H. Veenstra, B.J.J. Van Lent, J. Van Dam, and A.P. de Boer, Polymer, 40, 6661 (1999).
56. A. Bassani, L.A. Pessan, and E. Hage, J. Appl. Polym. Sci., 82, 2185 (2001).
57. A. Bassani and L.A. Pessan, J. Appl. Polym. Sci., 88, 1081 (2003).
58. F.O.M.S. Abreu, M.M.C. Forte, and S.A. Liberman, J. Appl. Polym. Sci., 95, 254 (2005).
59. Y. Matsuda, M. Hara, T. Mano, K. Okamoto, and M. Ishikawa, Polym. Eng. Sci., 45, 1630 (2005).
60. O. Balkan and H. Demirer, Polym. Compos., 31, 1285 (2010).
61. I. Fisher, J. Zoldan, A. Siegmann, and M. Narkis, Polym. Compos., 21, 476 (2000).
62. J. Varga, "Crystallization, Melting and Supermolecular Structure of Isotactic Polypropylene," in Polypropylene Structure, Blends and Composites, Structure and Morphology, Vol. 1, J. Karger-Kocsis, Ed., Chapman and Hall, Cambridge, GB, 56 (1995).
63. L.E. Nielsen, Predicting the Properties of Mixtures, Marcel Dekker, New York (1978).
64. J. Shen, G. Ji, B. Hu, and Y. Huang, J. Mater. Sci. Lett., 12, 1344 (1993).
65. T.L. Wong, C.M.F. Barry, and S.A. Orroth, J. Vinyl. Addit. Technol., 5, 235 (1999).
66. C.D. Han, Multiphase Flow in Polymer Processing, Academic Press, London (1981).
67. B. David, M. Kozlowski, and Z. Tadmor, Polym. Eng. Sci., 33, 227 (1993).
68. J. Karger-Kocsis, A. Kallo, and V.N. Kuleznev, Polymer, 25, 279 (1984).
69. S. Wu, Polymer, 26, 1855 (1985).
70. J. Jancar, A. DiAnselmo, and A.T. DiBenedetto, Polym. Eng. Sci., 32, 1394 (1992).
71. E.J. Pääkkönen, P.A. Järvelä, P. Törmälä, P.K. Järvelä, and J.C. Le Bell, Kunststoffe, 77, 18 (1987).
72. Y. Qiu, S.D. Batchelor, P.R. Jack, and M.G. McCord, Compos. Sci. Technol., 60, 2731 (2000).
73. R.S. Hadal, A. Dasari, J. Rohrmann, and R.D.K. Misra, Mater. Sci. Eng. A, 372, 296 (2004).
74. R.S. Hadal and R.D.K. Misra, Mater. Sci. Eng. A, 374, 374 (2004).
75. A. Dasari, S. Sarang, and R.D.K. Misra, Mater. Sci. Eng. A, 368, 191 (2004).
76. A. Dasari and R.D.K. Misra, Acta Mater., 52, 1683 (2004).
77. I.S. Miles, "Polymer Interfaces," in Multicomponent Polymer Systems, I.S. Miles and S. Rostami, Eds., Longman Group UK Ltd, Singapore, 17 (1992).
78. D. Benderly, A. Siegmann, and M. Narkis, Polym. Compos., 17, 86 (1996).
79. Y.C. Ou, T.T. Guo, X.P. Fang, and Z.Z. Yu, J. Appl. Polym. Sci., 74, 2397 (1999).
80. J. Kolarík, B. Pukánszky, and F. Lednicky, "Ternary Composites Polypropylene/Elastomer/Filler: Phase Structure and its Control," in Interfaces in Polymer, Ceramic, and Metal Matrix Composites, H. Ishida, Ed., Elsevier, New York, 453 (1988).
81. C. Scott, H. Ishida, and F.H.J. Maurer, J. Mater. Sci., 22, 3963 (1987).
82. C. Scott, H. Ishida, and F.H.J. Maurer, Rheol. Acta, 27, 273 (1988).
83. C. Scott, H. Ishida, and F.H.J. Maurer, J. Mater. Sci., 26, 5708 (1991).
84. Y. Long, R.A. Shanks, and Z.H. Stachursky, Prog. Polym. Sci., 20, 651 (1995).
85. F. Stricker, R.-D. Maier, and R. Mülhaupt, Angew. Makromol. Chem., 256, 95 (1998).
86. Q. Yuan, W. Jiang, L. An, and R.K.Y. Li, Polym. Adv. Technol., 15, 409 (2004).
87. Q. Yuan, W. Jiang, L. An, and R.K.Y. Li, J. Polym. Sci. Part B: Polym. Phys., 43, 306 (2005).
88. Q. Yuan, W. Jiang, L. An, J.D. Christiansen, and R.K.Y. Li, J. Appl. Polym. Sci., 96, 1729 (2005).
89. Q. Yuan, W. Jiang, L. An, and R.D.K. Misra, Mater. Sci. Eng. A, 415, 297 (2006).
90. L. Jingjiang, W. Xiufen, and G. Qipeng, J. Appl. Polym. Sci., 41, 2829 (1990).
91. J.P. Trotignon, L. Demdoum, and J. Verdu, Composites, 23, 313 (1992).
92. R. Hadal, A. Dasari, J. Rohrmann, and R.D.K. Misra, Mater. Sci. Eng. A, 380, 326 (2004).
93. C. Saujanya, R. Tangirala, and S. Radhakrishnan, Macromol. Mater. Eng., 287, 272 (2002).
94. R.D.K. Misra, R. Hadal, and S.J. Duncan, Acta Mater., 52, 4363 (2004).
95. D. Arencon, J.I. Velasco, M.A. Rodriguez-Pérez, and J.A. de Saja, J. Appl. Poym. Sci., 94, 1841 (2004).
96. M. Sumita, H. Tsukihi, K. Miyakasa, and K. Ishikawa, J. Appl. Polym. Sci., 29, 1523 (1984).
97. F. Striker, M. Bruch, and R. Mülhaupt, Polymer, 38, 5347 (1997).
98. E.J. Pääkkönen, S.N. Magonov, and P. Tormala, "Influence of Fillers on the Tg Process of Polypropylene," in Polymer Composites, B. Sedlacek, Ed., DeGruyter, Berlin, 199 (1986).
99. K. Nagarajan, K. Levon, and A.S. Myerson, J. Therm. Anal., Calorim., 59, 497 (2000).
100. C.B. Arends, Polymer Toughening, Marcel Dekker, New York, 61 (1996).
101. F.S. Bates, R.E. Cohen, and A.S. Argon, Macromolecules, 16, 1108 (1983).
102. V. Choudharly, H.S. Varma, and I.K. Varma, Polymer, 32, 2534 (1991).
103. R.E. Wetton and P.J. Corish, Polym. Test., 8, 303 (1989).
104. S. Ghosh, A.K. Bhowmick, N. Roychowdhury, and G. Holden, J. Appl. Polym. Sci., 77, 1621 (2000).
105. L.E. Nielsen and R.F. Landel, Mechanical Properties of Polymers and Composites, Marcel Dekker, New York (1994).
106. J. Jancar, J. Mater. Sci., 26, 4123 (1991).
107. A. Van Der Wal, J.J. Mulder, and R.J. Gaymans, Polymer, 39, 5477 (1998).
108. J.Z. Liang, R.K.Y. Li, and S.C. Tjong, Polym. Int., 48, 1068 (1999).
109. J.Z. Liang, R.K.Y. Li, and S.C. Tjong, Polym. Test., 19, 213 (2000).
110. G.J. Howard and R.A. Shanks, J. Macromol. Sci. B, 19, 167 (1981).
111. G.J. Howard and R.A. Shanks, J. Macromol. Sci. A, 17, 287 (1982).
112. L.H. Flett and W.H. Gardner, Maleic Anhydride Derivatives, Reactions of the Double Bond, Wiley, New York (1952).
113. B.C. Trivedi and B.M. Culbertson, Maleic Anhydride, Plenum Publishing Corporation, New York (1982).
114. T. Kwee, K.A. Mauritz, and F.L. Beyer, Polymer, 46, 3871 (2005).
115. A. Garton, Infrared Spectroscopy of Polymer Blends, Composites and Surfaces, Carl Hanser Verlag, Munich (1992).
116. B. Stuart, Infrared Spectroscopy: Fundamental and Applications, Wiley, Sussex, England (2004).
117. N.G. Gaylord, U.K. Patent 1,300,640 (1972).
118. J. Jancar and J. Kucera, Polym. Eng. Sci., 30, 714 (1990).