Mechanical properties of glass bead-and wollastonite-filled isotactic-polypropylene composites modified with thermoplastic elastomers

Polymer Composites

Volumn 31, Issue 7, 2010, Pages 1285-1308

  Balkan, Onur ^a   Demirer, Halil ^a  

^a MARMARA UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

CORE-SHELL; CORE-SHELL COMPOSITES; ELASTOMER PARTICLES; EXTENDED MODEL; FAILURE MECHANISM; FILLER PARTICLES; GLASS BEAD; INTERFACIAL ADHESIONS; ISOTACTICS; MECHANICAL PERFORMANCE; POLYPROPYLENE COMPOSITE; REINFORCING EFFECTS; RIGID PARTICLES; SEBS-G-MA; STRENGTH AND TOUGHNESS;

BLOCK COPOLYMERS; BUTENES; COPOLYMERIZATION; ETHYLENE; FILLED POLYMERS; GLASS; GRANULAR MATERIALS; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; MECHANISMS; MICROSTRUCTURE; POLYPROPYLENES; REINFORCED PLASTICS; REINFORCEMENT; RIGIDITY; RUBBER; SILICATE MINERALS; STYRENE;

THERMOPLASTIC ELASTOMERS;

EID: 77954322029     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.20953     Document Type: Article

References (124)

1. H.S. Katz, "Solid Spherical Fillers," in Handbook of Fillers for Plastics, H.S. Katz and J.V. Milewski, Eds., Van Nostrand Reinhold, New York, 429 (1987).
2. D. Sekutowski, "Wollastonite," in Plastics Additives and Modifiers Handbook, J. Edenbaum, Ed., Chapman & Hall, London, 547 (1996).
3. E.J. Pääkkönen, P.A. Järvelä, P. Törmälä, P.K. Järvelä, and J.C. Le Bell, Kunstst., 77, 18 (1987).
4. Z. Xing, L. Rautenberg, and H. Käufer, Kunstst., 85, 23 (1995).
5. D.H. Roberts, J. Vinyl Additive Technol., 5, 231 (1999).
6. T.L. Wong, C.M.F. Barry, and S.A. Orroth, J. Vinyl Additive Technol., 5, 235 (1999).
7. Y. Qiu, S.D. Batchelor, P.R. Jack, and M.G. McCord, Compos. Sci. Technol., 60, 2731 (2000).
8. Q. Wang, C. Liu, and Y. Chen, Plast. Rubber Compos., 30, 363 (2001).
9. R.S. Hadal, A. Dasari, J. Rohrmann, and R.D.K. Misra, Mater. Sci. Eng., A372, 296 (2004).
10. R.S. Hadal and R.D.K. Misra, Mater. Sci. Eng., A374, 374 (2004).
11. R. Hadal, A. Dasari, J. Rohrmann, and R.D.K. Misra, Mater. Sci. Eng., A380, 326 (2004).
12. A. Dasari, S. Sarang, and R.D.K. Misra, Mater. Sci. Eng., A368, 191 (2004).
13. A. Dasari and R.D.K. Misra, Acta Mater., 52, 1683 (2004).
14. A. Dasari, J. Rohrmann, and R.D.K. Misra, Mater. Sci. Eng., A364, 357 (2004).
15. G. Xian, R. Water, and F. Haupert, J. Polym. Sci., B44, 854 (2006).
16. V.A. Matonis, "An Analytical Evaluation of a Hypothetical Three-Phase Material," Ph.D. Thesis, The University of Connecticut, Connecticut (1967).
17. V.A. Matonis and N.C. Small, Polym. Eng. Sci., 9, 90 (1969).
18. J. Kolarik, F. Lednicky, J. Jancar, and B. Pukanszky, Polym. Commun., 31, 201 (1990).
19. J. Kolarik and J. Jancar, Polymer, 33, 4961 (1992).
20. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 29, 4651 (1994).
21. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 30, 1601 (1995).
22. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 30, 2438 (1995).
23. Y. Long and R.A. Shanks, J. Appl. Polym. Sci., 61, 1877 (1996).
24. Y. Long and R.A. Shanks, J. Appl. Polym. Sci., 62, 639 (1996).
25. R.A. Shanks and Y. Long, Polymer Networks Blends, 7, 87 (1997).
26. K. Premphet and P. Horanont, J. Appl. Polym. Sci., 76, 1929 (2000).
27. J.E. Stamhuis, Polym. Compos., 5, 202 (1984).
28. J.E. Stamhuis, Polym. Compos., 9, 72 (1988).
29. J.E. Stamhuis, Polym. Compos., 9, 280 (1988).
30. M. Denac, I. Smit, and V. Musil, Compos., A36, 1094 (2005).
31. F. Stricker and R. Mülhaupt, J. Appl. Polym. Sci., 62, 1799 (1996).
32. F. Stricker and R. Mülhaupt, Polym. Eng. Sci., 38, 1463 (1998).
33. F. Stricker, C. Friedrich, and R. Mülhaupt, J. Appl. Polym. Sci., 69, 2499 (1998).
34. P.R. Hornsby and K. Premphet, J. Mater. Sci., 32, 4767 (1997).
35. D.E. Mouzakis, F. Stricker, R. Mülhaupt, and J. Karger-Kocsis, J. Mater. Sci., 33, 2551 (1998).
36. J.Z. Liang, R.K.Y. Li, and S.C. Tjong, Polym. Compos., 20, 413 (1999).
37. J.Z. Liang, R.K.Y. Li, and S.C. Tjong, Polym. Eng. Sci., 40, 2105 (2000).
38. O. Balkan, "The Effect of Thermoplastic Elastomers on the Mechanical Properties of Polypropylene Composites," Ph.D. Thesis, Marmara University, Istanbul, Türkiye (2006).
39. O. Balkan, A. Ezdeşir, and H. Demirer Polym. Compos., 31, 1265 (2010).
40. S.-C.Wong and Y.-W.Mai, Polym. Eng. Sci., 39, 356 (1999).
41. S.C. Tjong, S.-A. Xu, R.K.Y. Li, and Y.W. Mai, Polym. Int., 51, 1248 (2002).
42. S.C. Tjong, S.-A. Xu, and Y.-W. Mai, J. Polym. Sci., B40, 1881 (2002).
43. S.C. Tjong, S.-A. Xu, R.K.Y. Li, and Y.-W. Mai, J. Appl. Polym. Sci., 86, 1303 (2002).
44. S.C. Tjong, S.-A. Xu, R.K.-Y. Li, and Y.-W. Mai, Compos. Sci. Technol., 62, 831 (2002).
45. S.C. Tjong, S.-A. Xu, R.K.Y. Li, and Y.-W. Mai, J. Appl. Polym. Sci., 87, 441 (2003).
46. S.C. Tjong, S.A. Xu, and Y.-W. Mai, J. Appl. Polym. Sci., 88, 1384 (2003).
47. X.L. Xie, K.L. Fung, R.K.Y. Li, S.C. Tjong, and Y.-W. Mai, J. Polym. Sci., B40, 1214 (2002).
48. S.C. Tjong and Y.Z. Meng, J. Polym. Sci., B41, 2332 (2003).
49. I. Smit, V. Musil, and I. Svab, J. Appl. Polym. Sci., 91, 4072 (2004).
50. I. Svab, V. Musil, I. Smit, and M. Makarovic, Polym. Eng. Sci., 47, 1873 (2007).
51. I. Svab, V. Musil, T. Jurkin, and I. Smit, Polym. Eng. Sci., 47, 2145 (2007).
52. K. Oksman and C. Clemons, J. Appl. Polym. Sci., 67, 1503, (1998).
53. H. Nitz, P. Reichert, H. Römling, and R. Mülhaupt, Macromol. Mater. Eng., 276/277, 51 (2000).
54. J. Wu, D. Yu, C.-M. Chan, J. Kim, and Y.-W. Mai, J. Appl. Polym. Sci., 76, 1000 (2000).
55. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 29, 3513 (1984).
56. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 29, 1595 (1984).
57. A.K. Gupta and S.N. Purwar, J. Appl. Polym. Sci., 30, 1799 (1985).
58. K.R. Srinivasan and A.K. Gupta, J. Appl. Polym. Sci., 53, 1 (1994).
59. S. Setz, F. Stricker, J. Kressler, T. Duschek, and R. Mülhaupt, J. Appl. Polym. Sci., 59, 1117 (1996).
60. A. Bassani, L.A. Pessan, and E. Hage, J. Appl. Polym. Sci., 82, 2185 (2001).
61. A. Bassani and L.A. Pessan, J. Appl. Polym. Sci., 88, 1081 (2003).
62. F.O.M.S. Abreu, M.M.C. Forte, and S.A. Liberman, J. Appl. Polym. Sci., 95, 254 (2005).
63. W.Y. Tam, T.Y. Cheung, and R.K.Y. Li, J. Mater. Sci., 35, 1525 (2000).
64. S. Wu, Polymer, 26, 1855 (1985).
65. S. Wu, J. Appl. Polym. Sci., 35, 549 (1988).
66. F. Stricker, R.-D. Maier, and R. Mülhaupt, Angew. Makromol. Chem., 256, 95 (1998).
67. M. Bramuzzo, A. Savadori, and D. Bacci, Polym. Compos., 6, 1 (1985).
68. J.Z. Liang and R.K.Y. Li, Polym. Compos., 19, 698 (1998).
69. J.Z. Liang and R.K.Y. Li, Polymer, 40, 3191 (1999).
70. J.Z. Liang and R.K.Y. Li, Polym. Int., 49, 170 (2000).
71. K.W. Kwok, Z.M. Gao, C.L. Choy, and X.G. Zhu, Polym. Compos., 24, 53 (2003).
72. I.L. Dubnikova, S.M. Berezina, and A.V. Antonov, J. Appl. Polym. Sci., 94, 1917 (2004).
73. S.C. Tjong, J.S. Shen, and R.K.Y. Li, Polym. Eng. Sci., 36, 100 (1996).
74. L.E. Nielsen and R.F. Landel, Mechanical Properties of Polymers and Composites, Marcel Dekker, Inc., New York (1994).
75. K. Friedrich and U.A. Karsch, Fiber. Sci. Technol., 18, 37 (1983).
76. L.E. Asp, B.A. Sjögren, and L.A. Berglund, Polym. Compos., 18, 9 (1997).
77. J. Jancar and J. Kucera, Polym. Eng. Sci., 30, 707 (1990).
78. J. Jancar and J. Kucera, Polym. Eng. Sci., 30, 714 (1990).
79. L.E. Nielsen, J. Appl. Polym. Sci., 10, 97 (1966).
80. S.V. Nair, S.-C. Wong, and L.A. Goettler, J. Mater. Sci., 32, 5335 (1997).
81. L. Jingjiang, W. Xiufen, and G. Qipeng, J. Appl. Polym. Sci., 41, 2829 (1990).
82. L. Jilkén, G. Mälhammar, and R. Seldén, Polym. Test., 10, 329 (1991).
83. J.P. Trotignon, L. Demdoum, and J. Verdu, Composites, 23, 313 (1992).
84. J.P. Trotignon, L. Demdoum, and J. Verdu, Composites, 23, 319 (1992).
85. P.A. Järvelä and P.K. Järvelä, J. Mater. Sci., 31, 3853 (1996).
86. J. Shen, G. Ji, B. Hu, and Y. Huang, J. Mater. Sci. Lett., 12, 1344 (1993).
87. L.E. Nielsen, Predicting the Properties of Mixtures-Mixture Rules in Science and Engineering, Marcel Dekker, Inc., New York (1978).
88. J.C. Halpin and J.L. Kardos, J. Appl. Phys., 43, 2235 (1972).
89. J.A. Manson, S.A. Iobst, and R. Acosta, J. Polym. Sci., A1, 179 (1972).
90. M. Sumita, T. Ookuma, K. Miyakasa, and K. Ishikawa, J. Mater. Sci., 17, 2869 (1982).
91. B.A. Sjögren and L.A. Berglund, Polym. Compos., 18, 1 (1997).
92. F. Striker, M. Bruch, and R. Mülhaupt, Polymer, 38, 5347 (1997).
93. Q. Yuan, W. Jiang, L. An, and R.K.Y. Li, Polym. Adv. Technol., 15, 409 (2004).
94. Q. Yuan, W. Jiang, L. An, J.D. Christiansen, and R.K.Y. Li, J. Appl. Polym. Sci., 96, 1729 (2005).
95. I. Fisher, J. Zoldan, A. Siegmann, and M. Narkis, Polym. Compos., 21, 476 (2000).
96. J. Jancar and A.T. DiBenedetto, J. Mater. Sci., 29, 4651 (1994).
97. J. Jancar, J. Mater. Sci., 31, 3983 (1996).
98. F. Stricker, Y. Thomann, and R. Mülhaupt, J. Appl. Polym. Sci., 68, 1891 (1998).
99. Y. Matsuda, M. Hara, T. Mano, K. Okamoto, and M. Ishikawa, Polym. Eng. Sci., 45, 1630 (2005).
100. M.R. Piggott and J. Leidner, J. Appl. Polym. Sci., 18, 1619 (1974).
101. L. Nicolais and L. Nicodemo, Polym. Eng. Sci., 13, 469 (1973).
102. B. Pukánszky, B. Turcsányi, and F. Tüdõs, "Effect of Interfacial Interaction on the Tensile Yield Stress of Polymer Composites," in Interfaces in Polymer, Ceramic, and Metal Matrix Composites, H. Ishida, Ed., Elsevier, New York, 467 (1988).
103. B. Pukánszky, Composites, 21, 255 (1990).
104. B. Pukánszky and E. Fekete, Adv. Polym. Sci., 139, 109 (1999).
105. S. Jian, J. Gending, and H. Yuanfu, J. Mater. Sci. Lett., 11, 409 (1992).
106. Van Der Wal, J.J. Mulder, and R.J. Gaymans, Polymer, 39, 5477 (1998).
107. A.J. Oshinski, H. Keskkula, and D.R. Paul, Polymer, 33, 268 (1992).
108. A.J. Oshinski, H. Keskkula, and D.R. Paul, Polymer, 33, 284 (1992).
109. F. Cser, F. Rasoul, and E. Kosior, Polym. Eng. Sci., 39, 1100 (1999).
110. B.Z. Jang, D.R. Uhlmann, and J.B.V. Sande, J. Appl Polym. Sci., 30, 2485 (1985).
111. B.Z. Jang, D.R. Uhlmann, and J.B.V. Sande, Polym. Eng. Sci., 25, 643 (1985).
112. T. Murayama, Dynamic Mechanical Analysis of Polymeric Material, Elsevier Scientific Publishing Company, Amsterdam, The Netherlands (1982).
113. A.J. Kinloch and R.J. Young, Fracture Behavior of Polymers, Elsevier Applied Science Publishers Ltd., London (1983).
114. S.F. Xavier, J.M. Schultz, and K. Friedrich, J. Mater. Sci., 25, 2411 (1990).
115. J. Karger-Kocsis, Polypropylene Structure, Blends and Composites, Vol.3 Composites, Chapman & Hall, Cambridge (1995).
116. P. Järvelä, J.C. Le Bell, B. Sandelin, P. Järvelä, and P. Törmälä, J. Mater. Sci., 21, 4193 (1986).
117. G.-S. Gai, Y.-F. Yang, S.-M. Fan, and Z.-F. Cai, Powder Technol., 153, 153 (2005).
118. K. Friedrich, Prog. Colloid. Polym. Sci., 64, 103 (1978).
119. Q. Yuan, W. Jiang, L. An, and R.K.Y. Li, J. Polym. Sci., B43, 306 (2005).
120. Q. Yuan, W. Jiang, L. An, and R.D.K. Misra, Mater. Sci. Eng., A415, 297 (2006).
121. M.L. Shiao, S.V. Nair, P.D. Garrett, and R.E. Pollard, Polymer, 35, 306 (1994).
122. I. Kelnar, Angew. Makromol. Chem., 189, 207 (1991).
123. W.-Y. Chiang, W.-D. Yang, and B. Pukánszky, Polym. Eng. Sci., 32, 641 (1992).
124. J. Chu, L. Rumao, and B. Coleman, Polym. Eng. Sci., 38, 1906 (1998).