SCOPUS 정보 검색 플랫폼

Volumn 107, Issue 1, 2010, Pages 9-14

Sustainable manufacturing in aerospace industry. Analysis of the viability of intermediate stages elimination in sheet processing

(5) Salguero, Jorge a Batista, Moises a Sanchez Carrilero, Manuel a Alvarez, Miguel a Marcos, Mariano a

a UNIVERSITY OF CÁDIZ (Spain)

Author keywords

Dry turning; Sustainable manufacturing; T3 O; Thermal treatment; UNS A92024

Indexed keywords

COMPARATIVE STUDIES; DRY TURNING; ECONOMIC CONSIDERATIONS; INTERMEDIATE STAGE; MANUFACTURING PERFORMANCE; MANUFACTURING PROCESS; PLASTIC FORMING PROCESS; SHEET PROCESSING; STRUCTURAL ELEMENTS; SURFACE FINISHES; SUSTAINABLE MANUFACTURING; THERMAL TREATMENT; THERMAL TREATMENT PROCESS; UNS A92024;

AEROSPACE INDUSTRY; HEAT TREATMENT; TURNING;

MANUFACTURE;

EID: 77954195815 PISSN: 10226680 EISSN: None Source Type: Book Series
DOI: 10.4028/www.scientific.net/AMR.107.9 Document Type: Conference Paper

Times cited : (11)

References (17)

1
- 37049001016
- Modeling of surface roughness in precision machining of metal matrix composites using ANN
- DOI 10.1016/j.jmatprotec.2007.04.121, PII S0924013607004748
- C. Basheer, U.A. Dabade, S.S. Joshi, V.V. Bhanuprasad and V.M. Gadre: J. of Mat. Proc. Tech. Vol.197 (2008), pp. 439-444. (Pubitemid 350251127)
- (2008) Journal of Materials Processing Technology , vol.197 , Issue.1-3 , pp. 439-444
- Basheer, A.C.¹ Dabade, U.A.² Joshi, S.S.³ Bhanuprasad, V.V.⁴ Gadre, V.M.⁵

2
- 0004258899
- Properties and selection: Nonferreous alloys and special-purpose materials, ASM International (Ohio, USA)
- ASM Handbook. Vol.2: Properties and selection: Nonferreous alloys and special-purpose materials, ASM International (Ohio, USA), 1995.
- (1995) ASM Handbook , vol.2

3
- 5244377917
- doi:10.1016/S0007-8506(07)60877-4
- F. Klocke: CIRP Annals Vol46(2) (1997), pp. 519-526.
- (1997) CIRP Annals , vol.46 , Issue.2 , pp. 519-526
- Klocke, F.¹

4
- 77954209602
- 22-04-98, 10/ Waste Law
- Spanish State Official Bulletin 96 (22-04-98), 10/1998 Waste Law.
- (1998) Spanish State Official Bulletin , vol.96

5
- 77954187369
- High performance machining
- Izaro Technical Editions (Bilbao Spain 2.004
- L.N. López de Lacalle, A. Lamikiz and J. A. Sánchez, High Performance Machining, Removal Processes, Izaro Technical Editions (Bilbao, Spain), 2.004.
- Removal Processes
- Lacalle De López, L.N.¹ Lamikiz, A.² Sánchez, J.A.³

6
- 17844410364
- Study of roundness on cylindrical bars turned of aluminium-copper alloys UNS A92024
- DOI 10.1016/j.jmatprotec.2005.02.061, PII S0924013605001317
- M. Marcos, M.A. Sebastian-Pérez, J.P. Contreras-Samper, M. Sanchez-Carrilero, M. Sanchez- Lopez and J.M. Sanchez-Sola: Mat. Proc. Tech. Vol.162-163 (2005), pp. 644-648. (Pubitemid 40584449)
- (2005) Journal of Materials Processing Technology , vol.162-163 , Issue.SPEC. ISS. , pp. 644-648
- Marcos-Barcena, M.¹ Sebastian-Perez, M.A.² Contreras-Samper, J.P.³ Sanchez-Carrilero, M.⁴ Sanchez-Lopez, M.⁵ Sanchez-Sola, J.M.⁶

7
- 72449188762
- E.M. Rubio, A.M. Camacho, J.M. Sanchez-Sola and M. Marcos: J. Achiev. Mat. & Manuf. Eng. Vol.16 (2005), pp. 164-170.
- (2005) J.Achiev. Mat. & Manuf. Eng , vol.16 , pp. 164-170
- Rubio, E.M.¹ Camacho, A.M.² Sanchez-Sola, J.M.³ Marcos, M.⁴

8
- 72449165516
- M.S. Carrilero, M. Marcos, M. Alvarez and V.M. Sanchez: Met. Rev. Vol 34 (1998), pp. 27-31.
- (1998) Met. Rev. , vol.34 , pp. 27-31
- Carrilero, M.S.¹ Marcos, M.² Alvarez, M.³ Sanchez, V.M.⁴

9
- 77954189630
- Study of the quality surface in the high speed milling of Al-Cu alloys
- Madrid, Spain
- J. Salguero, in: Study of the Quality Surface in the High Speed Milling of Al-Cu Alloys, in CD proceendings of the 2nd CISIF-MESIC, Madrid, Spain (2007).
- (2007) CD Proceendings of the 2nd CISIF-MESIC
- Salguero, J.¹

10
- 77954194608
- Paramatric analysis of the machining of aluminium alloys
- PhD Thesis, UNED-Madrid, Spain
- J.M. Sanchez: Paramatric Analysis of the Machining of Aluminium Alloys. Relationship with surface topography of machined workpieces (PhD Thesis, UNED-Madrid, Spain 2004).
- (2004) Relationship with Surface Topography of Machined Workpieces
- Sanchez, J.M.¹

11
- 0002946450
- doi:10.1243/PIME-PROC-1951-165-007-02
- B.T. Chao and G.H. Bisacre: Proc. Inst. Mech. Eng. Vol.165 (1951), pp. 1-13.
- (1951) Proc. Inst. Mech. Eng , vol.165 , pp. 1-13
- Chao, B.T.¹ Bisacre, G.H.²

12
- 0034291117
- Study on ultra-high-speed cutting of aluminum alloy: Formation of welded metal on the secondary cutting edge of the tool and its effects on the quality of finished surface
- DOI 10.1016/S0141-6359(00)00048-9
- R. Yousefi and Y. Ichida: Prec. Eng. Vol.24 (2000), pp. 371-376. (Pubitemid 32033642)
- (2000) Precision Engineering , vol.24 , Issue.4 , pp. 371-376
- Yousefi, R.¹ Ichida, Y.²

13
- 49249106182
- H. Gokkaya and A. Taskesen: J. Mech. Eng. Vol.54(7-8) (2008), pp. 521-530.
- (2008) J. Mech. Eng. , vol.54 , Issue.7-8 , pp. 521-530
- Gokkaya, H.¹ Taskesen, A.²

14
- 77954186391
- P.D. Goode: Nuc. Inst. & Met.Phys. Res. Vol.39(1-4) (1989), pp. 511-519.
- (1989) Nuc. Inst. & Met.Phys. Res , vol.39 , Issue.1-4 , pp. 511-519
- Goode, P.D.¹

15
- 85056967599
- Machine Tools and Operations (CRC Press, LUGAR
- H. Youssef and H. El-Hofy: Machining Technology. Machine Tools and Operations (CRC Press, LUGAR 2008).
- (2008) Machining Technology
- Youssef, H.¹ El-Hofy, H.²

16
- 0036027372
- A SEM and EDS insight into the BUL and BUE differences in the turning processes of AA2024 Al-Cu alloy
- DOI 10.1016/S0890-6955(01)00112-2, PII S0890695501001122
- M.S. Carrilero, R. Bienvenido, J.M. Sanchez, M. Alvarez, J.M. Gonzalez and M. Marcos: Int. J. Mach. Tools & Manuf. Vol.42(2) (2002), pp. 215-220. (Pubitemid 33018903)
- (2002) International Journal of Machine Tools and Manufacture , vol.42 , Issue.2 , pp. 215-220
- Carrilero, M.S.¹ Bienvenido, R.² Sanchez, J.M.³ Alvarez, M.⁴ Gonzalez, A.⁵ Marcos, M.⁶

17
- 0029710104
- doi:10.1016/S0007-8506(07)63025-X
- M.C. Shaw: CIRP Annals Vol.45(1) (1996), pp. 101-104.
- (1996) CIRP Annals , vol.45 , Issue.1 , pp. 101-104
- Shaw, M.C.¹

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.