The effects of cutting speed and feed rate on Bue-Bul formation, cutting forces and surface roughness when machining Aa6351 (T6) alloy

Strojniski Vestnik/Journal of Mechanical Engineering

Volumn 54, Issue 7-8, 2008, Pages 521-530

  Gokkaya, Hasan ^a   Taskesen, Ahmet ^b  

^a Zonguldak Karaelmas Universitesi Safranbolu Meslek Yuksekokulu   (Turkey)

^b GAZI UNIVERSITY   (Turkey)

Author keywords

Built up edge (BUE); Built up layer (BUL); Cutting forces; Machining; Surface roughness

Indexed keywords

ALLOYS; CARBIDES; FRICTION; MACHINING; SPEED; SURFACE PROPERTIES; SURFACE ROUGHNESS;

BUILT-UP EDGE (BUE); BUILT-UP LAYER (BUL); CUTTING FORCES; CUTTING PARAMETERS; CUTTING SPEEDS; FEED RATES; MACHINING PARAMETERS; WORK PIECES;

METAL ANALYSIS;

EID: 49249106182     PISSN: 00392480     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (20)

1. Modern Metal Cutting, Practical Handbook, Sandvik Coroman, Sweden, 1994.
2. Sanchez-Carrilero, M., Sanchez-Sola, J.M., Gonzalez, J.M., Contreras, J.M., Marcos, M. Cutting Forces Compatibility Based On A Plasticity Model. Application to The Oblique Cutting Of The AA2024 Alloy, Int. J of Machi Tools & Manuf; 2002, no.42, p.559-565.
3. Y. Sahin, Y., Talas Kaldirma Prensipleri 1, Gazi Kitabevi, Ankara, 2003, (In Turkish).
4. Aydin, B., Ozcatalbas, Y. AA2014 (T6) Alasiminin Islenebilirlik Ozelliklerine Kesici Takim Geometrisinin Etkisi, Makine Tasarimi ve Imalati Dergisi, 2003, no.5, p.89-95, (in Turkish).
5. Ozcatalbas, Y. Dusuk Alasimli Celikte Yiginti Talas Olusumunun Isleme Ozelliklerine Etkisi, 8. Uluslar arasi Makine Tasarimi ve Imalat Kongresi, ODTU, 1998, p.25-33 (in Turkish).
6. Trent, E.M. Metal Cutting, Taner Ltd. London, 1988.
7. Etibank Aluminyum Isletmesi Muessesi Mudurlugu Uran Katalogu, (In Turkish), 1995
8. Hong, S.Y., Ding, Y., Jeong, W., Friction and cutting forces in cryogenic machining of Ti-6A1-4V, Int. J Machi Tools & Manuf., 2001, no.41, p.2271-2285.
9. Dae, E.K., Dong, H.H. Experimental Investigation of the Contact Sliding Behaviour of Metals, J Manufac Sci and Eng, 1998, no.120, p.395-400.
10. Jeelani, S., Musail, M. Dependence of Fatigue Life on the Surface Integrity in the Machining of 224-T 351 Aluminum Alloy Unlubricated Conditions, J Mater Sci, 1986, no.21, p.155-160.
11. Oishi, K. Mirror Cutting of Aluminium with Sapphire Tool, J Mater Proc Tech, 1996, no.62, p.331-334.
12. Rubio, E.M., Camacho, A.M., S'anchez-Sola, J.M., Marcos, M. Surface Roughness of AA7050 Alloy Turned Bars, Analysis of the Influence of the Length of Machining, J Mater Proc Tech, 2005, p. 162-163, p.682-689.
13. Altin, A., Gökkaya, H., Nalbant, M. Isleme Parametrelerinden Kesme Hizinin Inconel 718 Super Alasimin Islenebilirligine Etkisi, Gazi Universitesi Muhendislik Fakultesi, Muhendislik-Mimarhk Fakultesi Dergisi, 2005, (in Turkish).
14. Seker, U. Talasli Imalatta Takim Tasarimi Ders Notlari, Gazi Universitesi Fen Bilimleri Enstitusu Yuksek Lisans Ders Notlari, Ankara, 2000, (in Turkish).
15. Liew, W.Y.H., Hutchingsand, I.M., Williams, J.A. The Interaction Between Tool Material Environment and Process Conditions in the Machining of Aluminum Alloys, Mach Tech, (2), 1999, p.286-373.
16. Gokkaya, H., Sur, G., Dilipak, H. PVD ve CVD Kaplamali Sementit Karbür Kesici Takimlarin İşleme Parametrelerine Baǧli Olarak Yüzey Pürüzlülügüne Etkisinin Deneysel Olarak İncelenmesi, Z.K.U. Karabuk Teknik Egitim Fakultesi Teknoloji Dergisi, 2004, no.7, (in Turkish).
17. Asian, E., Camuscu, N., Birgoren, B. Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with A1203 + TiCN mixed ceramic tool, Mat Des, 2006, in Press.
18. Chen, W. Cutting forces and surface finish when machining medium hardness steel using CBN tools, Int J Mach Tools & Manuf, 2000, no.40, p.455-466.
19. Altin A, Nalbant M, Taskesen A. The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools, Mat Des, 2007, no.28, p.2518-2522.
20. Taskesen, A., Altin, A., Nalbant, M. The Effects of Cutting Speed on Tool Wear and Tool Life When Turning Inconel 718 with Ceramic and Coated Carbide Inserts, Trans. Indian Inst. Met, 2007, vol.60, no.4, p. 1-8.