Modeling and analysis of linear synchronous motors in high-speed maglev vehicles

IEEE Transactions on Magnetics

Volumn 46, Issue 7, 2010, Pages 2656-2664

  Hosseini, Monir Sadat ^a   Vaez Zadeh, Sadegh ^a  

^a UNIVERSITY OF TEHRAN   (Iran)

Author keywords

Electromagnetic analysis; Electromagnetic fields; Electromagnetic forces; Finite element analysis; Linear synchronous motors; Modeling

Indexed keywords

AC CURRENTS; ANALYTICAL METHOD; BASE MODELS; DC EXCITATION; ELECTROMAGNETIC ANALYSIS; ELECTROMAGNETIC FORCES; FIELD DISTRIBUTION; FINITE ELEMENT ANALYSIS; GOOD CORRELATIONS; HIGH-SPEED; LINEAR SYNCHRONOUS MOTORS; MAGLEV VEHICLES; MAGNETIC FIELD DISTRIBUTION; MODELING AND ANALYSIS; NORMAL FORCES; SLOT EFFECT;

AC GENERATOR MOTORS; ELECTRIC MOTORS; ELECTROMAGNETIC FIELD MEASUREMENT; ELECTROMAGNETIC FIELDS; FINITE ELEMENT METHOD; FUZZY CONTROL; MAGNETIC FIELDS; MAGNETIC LEVITATION; MAGNETIC LEVITATION VEHICLES; MAGNETIC MATERIALS; MAXWELL EQUATIONS; NORMAL DISTRIBUTION;

SYNCHRONOUS MOTORS;

EID: 77953838119     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2009.2039999     Document Type: Article

References (36)

1. A. Cassat and M. Jufer, "MAGLEV projects technology aspects and choices," IEEE Trans. Appl. Supercond., vol.12, no.1, pp. 915-925, Mar. 2002.
2. J. G. Gieras and Z. J. Piech, Linear Synchronous Motors. Boca Raton, FL: CRC, 2000.
3. H. W. Lee, K. C. Kim, and J. Lee, "Review of MAGLEV train technologies," IEEE Trans. Magn., vol.42, no.7, pp. 1917-1925, Jul. 2006.
4. S. Bohn and G. Steinmetz, "The electromagnetic levitation and guidance technology of the TRANSRAPID test facility EMSLAND," IEEE Trans. Magn., vol.MAG-20, no.5, pp. 1666-1671, Sep. 1984. (Pubitemid 15502868)
5. G. Wang, H. Xu, J. Sun, and W. Wei, "Electromagnetic field analysis and dynamic modeling of force for motor in Maglev train," in Proc. 7th World Congr. Intelligent Control and Automation, Jun. 2008, pp. 8198-8202.
6. K. Yoshida and J. Lee, "3-D FEM field analysis in controlled-PM LSM for Maglev vehicle," IEEE Trans. Magn., vol.33, no.2, pp. 2207-2210, Mar. 1997.
7. M. Andriollo, G. Martinelli, A. Morini, and A. Tortella, "FEM calculation of the LSM propulsion force in EMS-Maglev trains," IEEE Trans. Magn., vol.32, no.5, pp. 5064-5066, Sep. 1996.
8. T. Saijo, "Thrust and levitation force characteristics of linear synchronous motors," in Proc. Int. Maglev and Linear Drives Conf., May 1986, pp. 157-164.
9. X.Wang and Q. Ge, "Speed sensorless control of a linear synchronous motor using state observer on d-q reference frame," in Proc. Electrical Machines and Systems, Oct. 2008, pp. 1553-1557.
10. F. C. Zhi, F. Y. Tong, Y. Y.Yue, and L. Z. Xing, "State space model and simulation of long stator linear synchronous motor in Maglev vehicle," in Proc. Intelligent Transportation Systems, Oct. 2003, pp. 1482-1485.
11. G. R. Slemon, R. A. Turton, and P. E. Burke, "A linear synchronous motor for high speed ground transport," IEEE Trans. Magn., vol.MAG-10, no.3, pp. 435-438, Sep. 1974.
12. H. W. Cho, H. K. Sung, S. Y. Sung, D. J. You, and S. M. Jang, "Design and characteristic analysis on the short-stator linear synchronous motor for high-speed Maglev propulsion," IEEE Trans. Magn., vol.44, no.11, pp. 4369-4372, Nov. 2008.
13. K. B. Quan, W. H. Xing, L. L. Yi, Z. L. Liang, Z. Zhe, and C. H. Chuan, "The thrust characteristics investigation of double-side plate permanent magnet linear synchronous motor for EML," IEEE Trans. Magn., vol.45, no.1, pp. 501-505, Jan. 2009.
14. K. B. Quan, H. X. Zhen, W. H. Xing, and L. L. Yi, "Thrust and thermal characteristics of electromagnetic launcher based on permanent magnet linear synchronous motors," IEEE Trans. Magn., vol.45, no.1, pp. 358-362, Jan. 2009.
15. L. L.Yi,H. J. Jie, W. H. Xing, L. Peng, Z. Zhe, and L. X. Peng, "Section crossing drive with fuzzy-PI controller for the long stroke electromagnetic launcher," IEEE Trans. Magn., vol.45, no.1, pp. 363-367, Jan. 2009.
16. W. H. Xing, H. J. Jie, L. L. Yi, T. Y. Bin, D. Kan, and C. H. Chuan, "Research for the control system of a pulsed power permanent linear synchronous motor," IEEE Trans. Magn., vol.45, no.1, pp. 309-312, Jan. 2009.
17. Y. W. Zhu, D. H. Koo, and Y. H. Cho, "Detent force minimization of permanent magnet linear synchronous motor by means of two different methods," IEEE Trans. Magn., vol.44, no.11, pp. 4345-4348, Nov. 2008.
18. S. U. Chung, H. J. Lee, and S. M. Hwang, "A novel design of linear synchronous motor using FRM topology," IEEE Trans. Magn., vol.44, no.6, pp. 1514-1517, Jun. 2008.
19. Z. Dailin, C. Youping, K. C. Tom, A.Wu, and Z. Zude, "Compensation scheme of position angle errors of permanent-magnet linear motors," IEEE Trans. Magn., vol.43, no.10, pp. 3868-3871, Oct. 2007.
20. B. Tomczuk, G. Schröder, and A. Waindok, "Finite-element analysis of the magnetic field and electromechanical parameters calculation for a slotted permanent-magnet tubular linear motor," IEEE Trans. Magn., vol.43, no.7, pp. 3229-3236, Jul. 2007.
21. F. J. Lin, P. H. Shen, S. L.Yang, and P. H. Chou, "Recurrent radial basis function network-based fuzzy neural network control for permanentmagnet linear synchronous motor servo drive," IEEE Trans. Magn., vol.42, no.11, pp. 3694-3705, Nov. 2006.
22. D. Y. Lee and G. T. Kim, "Design of thrust ripple minimization by equivalent magnetizing current considering slot effect," IEEE Trans. Magn., vol.42, no.4, pp. 1367-1370, Apr. 2006.
23. S. I. Kim, J. P. Hong, Y. K. Kim, H. Nam, and H. I. Cho, "Optimal design of slotless-type PMLSM considering multiple responses by response surface methodology," IEEE Trans. Magn., vol.42, no.4, pp. 1219-1222, Apr. 2006.
24. S. Vaez-Zadeh and A. Hassanpour, "Multiobjective design optimization of air-core linear permanent magnet synchronous motors for improved thrust and low magnet consumption," IEEE Trans. Magn., vol.42, no.3, pp. 446-452, Mar. 2006.
25. D. Y. Lee, C. G. Jung, K. J. Yoon, and G. T. Kim, "A study on the efficiency optimum design of a permanent magnet type linear synchronous motor," IEEE Trans. Magn., vol.41, no.5, pp. 1860-1863, May 2005.
26. J. Wang and D. Howe, "Design optimization of radially magnetized, iron-cored, tubular permanent-magnet machines and drive systems," IEEE Trans. Magn., vol.40, no.5, pp. 3262-3277, Sep. 2004.
27. D. C. J. Krop, E. A. Lomonova, and A. J. A.Vandenput, "Application of Schwarz-Christoffel mapping to permanent-magnet linear motor analysis," IEEE Trans. Magn., vol.44, no.3, pp. 352-359, Mar. 2008.
28. Y. M. Chen, S. Y. Fan, and W. S. Lu, "Performance analysis of linear permanent-magnet synchronous motors with finite-element analysis," IEEE Trans. Magn., vol.44, no.3, pp. 377-385, Mar. 2008.
29. O. Danielsson and M. Leijon, "Flux distribution in linear permanent- magnet synchronous machines including longitudinal end effects," IEEE Trans. Magn., vol.43, no.7, pp. 3197-3201, Jul. 2007.
30. G. H. Kang, J. P. Hong, and G. T. Kim, "Design and analysis of slotless- type permanent-magnet linear brushless motor by using equivalent magnetizing current," IEEE Trans. Ind. Appl., vol.37, no.5, pp. 1241-1247, Sep./Oct. 2001.
31. D. L. Trumper, W. J. Kim, and M. E. Williams, "Design and analysis framework for linear permanent magnet machines," IEEE Trans. Ind. Appl., vol.32, no.2, pp. 371-379, Mar./Apr. 1996.
32. Z. Deng, I. Boldea, and A. Nasar, "Fields in permanent magnet linear synchronous machines," IEEE Trans. Magn., vol.22, no.2, pp. 107-112, Mar. 1986.
33. Z. Q. Zhu and D. Howe, "Instantaneous magnetic field distribution in brushless permanent magnet dc motors, part III: Effect of stator slotting," IEEE Trans. Magn., vol.29, no.1, pp. 143-151, Jan. 1993. (Pubitemid 23632726)
34. I. S. Jung and D. S. Hyun, "Dynamic characteristics of PM linear synchronous motor driven by PWM inverter by finite element analysis," IEEE Trans. Magn., vol.35, no.5, pp. 3697-3699, Sep. 1999.
35. A. Boldea and S. Nasar, Linear Electromagnetic Devices. New York: Taylor & Francis, 2001.
36. G. Xiong and S. A. Nasar, "Analysis of fields and forces in a permanent magnet linear synchronous machine based on the concept of magnetic charge," IEEE Trans. Magn., vol.25, no.3, pp. 2713-2719, May 1989.