Yielding behavior of Nb micro-alloyed C-Mn-Si TRIP steel studied by in-situ synchrotron X-ray diffraction

ISIJ International

Volumn 50, Issue 4, 2010, Pages 620-629

  Jung, Jaehyuk ^a   Kim, Hansoo ^a   De Cooman, B C ^a  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

Author keywords

If steel; Mechanical properties; Synchrotron radiation; TRIP; TWIP

Indexed keywords

DIFFRACTION PEAKS; ELASTIC LATTICE; ELASTO-PLASTIC; IF STEEL; IN-SITU SYNCHROTRONS; LATTICE STRAIN; MACROSCOPIC YIELD; MICRO-STRUCTURAL; PHASE FRACTIONS; PHASE TRANSFORMATION; RETAINED AUSTENITE; STRESS AND STRAIN; STRESS-INDUCED; TENSILE TESTS; TRIP-STEEL; YIELDING BEHAVIOR;

AUSTENITE; FERRITE; MANGANESE; MANGANESE COMPOUNDS; MARTENSITE; MARTENSITIC STEEL; MARTENSITIC TRANSFORMATIONS; STEEL METALLURGY; STRAIN; SYNCHROTRON RADIATION; SYNCHROTRONS; TENSILE TESTING; WEAR RESISTANCE; X RAY DIFFRACTION; YIELD STRESS;

MECHANICAL PROPERTIES;

EID: 77953644925     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.50.620     Document Type: Article

References (34)

1. B. C. De Cooman: Curr. Opin. Solid State Mater. Sci., 8 (2004), 285.
2. L. Samek, B. C. De Cooman, J. Van Slycken, P. Verleysen and J. Degrieck: Steel Res. Int., 11 (2004), 716.
3. M. Onyuna, H. Oettel, U. Martin and A. Weiss: Adv. Eng. Mater., 6 (2004), 529.
4. J. Wang and S. van der Zwaag: Metall Trans. A, 32A (2001), 1527.
5. M. L. Brandt and G. B. Olson: Iron Steelmaker, 20 (1995), 55.
6. W. Bleck, S. Papaethymiou and A. Frehn: Steel Res. Int., 75 (2004), 704.
7. G. N. Haidemenopolous and A. N. Vasilakos: Steel Res. Int., 67 (1996), 513.
8. K. Sugimoto, M. Misu, M. Kobayashi and H. Shirasawa: ISIJ Int., 33 (1993), 775.
9. D. Krizan, J. Antonissen and B. C. De Cooman: Proc. Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications, AIST, Warrendale, PA, USA, (2004), 205.
10. A. Pétein and P. Jacques: Steel Res. Int., 75 (2004), 724.
11. A. M. Streicher: M.S. Thesis, Colorado School of Mines, Golden, CO, (2002).
12. L. Samek, E. De Moor, J. Penning and B. C. De Cooman: Metall. Mater, Trans. A, 37A (2006), 109.
13. Q. Furnemont, P. Jacques, T. Pardoen, F. Lani, S. Godet, P. Harlet, K. Conlon and F. Delannay: Proc. Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, ed. by B. C. De Cooman, GRIPS Media GmbH, Bad Harzburg, Germany, (2002), 303.
14. P. J. Jacques, Q. Furnemont, S. Godet, T. Pardoen, K. T. Kolon and F. Delannay: Philos. Mag., 86 (2006), No. 16, 2371.
15. P. J. Jacques, Q. Furnemont, F. Lani, T. Pardoen and F. Delannay: Acta Mater., 55 (2007), 3681.
16. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai and Y. Morii: Acta Mater., 52 (2004), 5737.
17. E. Jimenez-Melero, N. H. Van Dijk, L. Zhao, J. Sietsma, S. E. Offerman, J. P. Wright and S. van der Zwaag: Scr. Mater., 56 (2007), 421.
18. E. Jimenez-Melero, N. H. Van Dijk, L. Zhao, J. Sietsma, S. E. Offerman, J. P. Wright and S. van der Zwaag: Acta Mater., 55 (2007), 6713.
19. A. M. Streicher, J. G. Speer, D. K. Matlock, B. C. De Cooman and D. L. Williamson: Metall. Mater. Trans. A, 36A (2005), 907.
20. K. Sugimoto, M. Kobayashi and S. Yasuki: Metall. Mater, Trans. A, 28A (1997), 2637.
21. K. Sugimoto, M. Kobayashi, H. Matsushima and S. Hashimoto: Trans. Jpn. Soc. Mech. Eng., 16A (1995), 80.
22. L. Barbe, B. C. De Cooman and K. Conlon: Z. Metallkd., 93 (2002), 1217.
23. J. W. L. Pang, T. M. Hoden, J. S. Wright and T. E. Mason: Acta Mater., 48 (2000), 1131.
24. S. R. Agnew, C. N. Tome, D. W. Brown, T. M. Holden and S. C. Vogel: Scr. Metall., 48 (2003), 1003.
25. H. J. Stone, T. M. Holden and R. C. Reed: Acta Mater., 47 (1999), 4435.
26. X-ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation, ASTM Standard, E975-84, 787.
27. M. De Meyer, D. Vanderschueren, K. De Blauwe and B. C. De Cooman: Proc. 41st Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, USA, (1999), 483.
28. T. Ungar: Scr. Metall., 51 (2004), 777.
29. B. D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Co., Inc., Reading, MA, (1978), 285.
30. Y. Tomota, P. Lukas, S. Harjo, J.-H. Park, N. Tsuchida and D. Neov: Acta Mater., 51 (2003), 819.
31. M. Hoelzel, S. A. Danilkin, A. Hoser, H. Ehrenberg, T. Wieder and H. Fuess: Appl. Phys., 74 (2002), 1013.
32. Y. Endoh and Y. Noda: J. Phys. Soc. Jpn., 46 (1979), 806.
33. B. C. De Cooman, J. G. Speer, I. Y. Pyshmintsev and N. Yoshinaga: Materials Design, GRIPS Media GmbH, Bad Harzburg, Germany, (2007), 218.
34. F. D. Fischer and E. R. Oberaigner: J. App. Mech., 67 (2000), 793.