Influence of alloying elements on the kinetics of strain-induced martensitic nucleation in low-alloy, multiphase high-strength steels

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 1, 2006, Pages 109-124

  Samek, L ^a   De Moor, E ^a   Penning, J ^a   De Cooman, Bruno C ^a  

^a GHENT UNIVERSITY   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYING ELEMENTS; AUSTENITE; COMPOSITION; CRYSTAL MICROSTRUCTURE; GRAIN SIZE AND SHAPE; NUCLEATION; REACTION KINETICS; REGRESSION ANALYSIS; STACKING FAULTS; STRENGTH OF MATERIALS; THERMAL EFFECTS; THERMODYNAMIC STABILITY;

AUTOCATALYSIS; METASTABLE AUSTENITE; STRAIN-INDUCED MARTENSITIC NUCLEATION; TRANSFORMATION-INDUCED-PLASTICITY STEELS;

MARTENSITE;

EID: 31544465251     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0157-0     Document Type: Article

References (69)

1. P. Verleysen, J. Van Slycken, J. Degrieck, B.C. De Cooman, and L. Samek: Int. Conf. on Advanced High Strength Sheet Steels for Automotive Application Proceedings, Winter Park, CO, 2004, pp. 375-82.
2. L. Samek, B.C. De Cooman, J. Van Slycken, P. Verleysen, and J. Degrieck: Int. Conf. on Advanced High Strength Sheet Steels for Automotive Application Proceedings, Winter Park, CO, 2004, pp. 361-74.
3. L. Samek, B.C. De Cooman, J. Van Slycken, P. Verleysen, and J. Degrieck: Steel Res., 2004, No. 11, pp. 716-23.
4. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6A, p. 791.
5. K.R. Kinsman, E. Eichen, and H.I. Aaronson: Metall. Trans. A, 1975, vol. 6A, pp. 346-48.
6. W.T. Reynolds, S.S. Brenner, and H.I. Aaronson: Scripta Metall., 1988, vol. 22, pp. 1343-48.
7. R.I. Entin: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, NY, 1962, pp. 295-304.
8. H.K.D.H. Bhadeshia and D.D. Edmonds: Metall. Trans. A, 1979, vol. 10A, pp. 895-907.
9. R.F. Hehemann: Phase Transformation, ASM, Metals Park, OH, 1970, pp. 397-432.
10. M.-X. Zhang and P.M. Kelly: Mater. Characterization, 1998, vol. 40, pp. 159-68.
11. M.D. Meyer, D. Vanderschueren, and B.C. De Cooman: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (8), pp. 819-28.
12. J. Mahieu: Ph.D. Thesis, Ghent University, Ghent, Belgium, 2004.
13. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: Iron and Steelmaker, 2000, vol. 27 (2), pp. 55-63.
14. J. Maki, J. Mahieu, B.C. De Cooman, and S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125-31.
15. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573-80.
16. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: Iron Steel Inst. Jpn. Int., 1999, vol. 39 (8), pp. 813-22.
17. L. Barbé, L. Tosal-Martínez, and B.C. De Cooman: Proc. Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschafts verlag Mainz GmbH, Aachen, Germany, June 19-21, 2002, pp. 299-302.
18. J. Wang and S. Van Der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527-39.
19. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570-79.
20. H.C. Chen, H. Era, and M. Shimizu: Metall. Trans. A, 1989, vol. 20A, pp. 437-45.
21. K. Sugimoto, M. Kobayashi, and S. Hashimoto: J. Jpn. Inst. Metall., 1990. vol. 54, pp. 657-63.
22. K. Sugimoto, N. Usui, M. Kobayashi, and S. Hashimoto: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 1311-18.
23. V.F. Zackay, D. Parker, D. Fahr, and R. Bush: Trans. ASM, 1967, vol. 60, pp. 252-59.
24. A.Z. Hanzaki, P.D. Hodgson, and S. Yue: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2405-14.
25. J.C. Fisher, J.H. Hollomon, and D. Turnbull: Trans. AIME, 1949, vol. 185, pp. 691-700.
26. K. Sugimoto, M. Misu, M. Kobayashi, and H. Shirasawa: Iron Steel Inst. Jpn., 1993, vol. 33 (7), pp. 775-82.
27. Z. Nishiyama: Marutensaito-Hentai-Kisohen, Maruzen, Tokyo, 1971, p. 204.
28. G.N. Haidemenopoulos, M. Grujicic, G.B. Olson, and M. Cohen: J. Alloys and Compounds, 1995, vol. 220, pp. 142-47.
29. N. Murai and T. Tsumura: Tetsu-to-Hagané, 1998, vol. 84, p. 48.
30. K. Sugimoto and M. Kobayashi: Proc. Symp. High Strength Steels for Automotive Industry, 36th MWSP Conf., C.E. Slater, Iron and Steel Society, Inc, Baltimore, MD, 1994, pp. 255-65.
31. J.R. Patel and M. Cohen: Acta. Metall., 1953, vol. 1, pp. 531-38.
32. W.-S. Lee and C.-F. Lin: Mater. Sci. Technol., 2002, vol. 18, pp. 869-76.
33. O. Moriau, L. Tosal-Martinez, P. Verleysen, and J. Degrieck: Proc. Int. Conf on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschafts verlag Mainz GmbH, Aachen, Germany, June 19-21, 2002, pp. 247-51.
34. R.-Y. Fu, X-C. Wei, L. Li, B.C. De Cooman, P. Wollants, X-D. Zhu, and L. Wang: Proc. Int. Conf on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschafts verlag Mainz GmbH, Aachen, Germany, June 19-21, 2002, pp. 287-91.
35. I. Tamura, T. Maki, H. Hato, Y. Tomota, and M. Okada: Proc. 2nd Int. Conf. on Strength of Metals and Alloys, Metals Park, OH, 1970, vol. 3.
36. J.P. Bressanelli and A. Moskowitz: Trans. ASM, 1966, vol. 59, pp. 223-29.
37. Y. Fukase, K. Ebato, N. Okubo, and S. Matsuo: J. Jpn. Inst. Met., 1968, vol. 32, p. 38.
38. H. Hirano, M. Sudo, and Y. Yutori: J. Jpn. Inst. Met., 1969, vol. 33, p. 975.
39. T. Angel: J. Iron Steel Inst., 1954, vol. 177, pp. 165-74.
40. D.C. Ludwingson 'and J.A. Berger: J. Iron Steel Inst., 1969, vol. 207, pp. 63-69.
41. J. Burke: Kinetics of Phase Transformation in Metals, Pergamon Press, Oxford, United Kingdom, 1965.
42. O. Matsumura, Y. Sakuma, and H. Takechi: Scripta Metall., 1987, vol. 21, pp. 1301-06.
43. N. Tsuchida. and Y. Tomota: Mater. Sci. Eng., 2000, vol. A285, pp. 345-52.
44. K. Sugimoto, M. Kobayashi, and S. Hashimoto: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 3085-91.
45. I.Y. Pychmintsev, R.A. Savrai, B.C. De Cooman, and O. Moriau: Proc. Int. Conf on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschafts verlag Mainz GmbH, Aachen, Germany, June 19-21, 2002, pp. 299-302.
46. W.W. Gerberich, G. Thomas, E.R. Parker, and V.F. Zackay: Proc. 2nd Int. Conf. on Strength of Metals and Alloys, ASM, Metals Park, OH, 1970, vol. 3, pp. 894-99.
47. J.RC. Guimarães: Scripta Metall., 1972, vol. 6, pp. 795-803.
48. A.N. Vasilakos, K. Papamantellos, G.N. Haidemenopoulos, and W. Bleck: Steel Res., 1999, vol. 70 (11), pp. 466-71.
49. F.S. LePera: J. Met., 1980, pp. 38-39.
50. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag, J.H. Root, and N.B. Konyer: Scripta Metall. Mater., 1993, vol. 29 (8), pp. 1011-16.
51. R.C. Ruhl and M. Cohen: Trans. TMS-AIME, 1969, vol. 245, pp. 241-51.
52. A. Itami, M. Takahashi, and K. Usihioda: Iron Steel Inst. Jpn. Int., 1995, vol. 35 (9), pp. 1121-27.
53. M. De Meyer: Ph.D. Thesis, Ghent University, Ghent, Belgium, 2001.
54. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531-8.
55. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245-53.
56. P. Payson and C.H. Savage: Trans. ASM, 1944, vol. 33, pp. 261-80.
57. E.S. Rowland and S.R. Lyle: Trans. ASM, 1946, vol. 37, pp, 27-47.
58. A.E. Nehrenberg: Trans. AIME, 1946, vol. 167, pp. 494-98.
59. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-27.
60. W. Steven and A.G. Haynes: J. Iron Steel Inst., 1956, vol. 183, pp. 349-59.
61. R.A. Grange and H.M. Stewart: Trans. AIME, 1946, vol. 167, pp. 467-90.
62. L.A. Carapella: Met. Progr., American Society for Metals, 1944, vol. 46, p. 108.
63. J. Mahieu and B.C. De Cooman: unpublished research.
64. A.N. Vasilakos, J. Ohlert, K. Giasla, G.N. Haidemenopoulos, and W. Bleck: Proc. Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, B.C. De Cooman, ed., Wissenschafts verlag Mainz GmbH, Aachen, Germany, June 19-21, 2002, pp. 277-80.
65. K. Ishida and T. Nishizawa: Trans. JIM, 1974, vol. 15, p. 225.
66. Y.-K. Lee and C.-S. Choi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355-60.
67. G.N. Haidemenopoulos and A.N. Vasilakos: J. Alloys Compounds, 1997, vol. 247, pp. 128-33.
68. G.N. Haidemenopoulos and A. Vasilakos: Steel Res., 1996, vol. 67 (11), pp. 513-19.
69. H. Chang and T.Y. Hsu: Acta. Metall., 1986, vol. 34, pp. 333-38.