Preparation and characterization of hydrophile nano-porous polyethersulfone membranes using synthesized poly(sulfoxide-amide) as additive in the casting solution

Journal of Membrane Science

Volumn 334, Issue 1-2, 2009, Pages 64-73

  Rahimpour, A ^a   Madaeni, S S ^b   Shockravi, A ^c   Ghorbani, S ^c  

^a BABOL NOSHIRVANI UNIVERSITY OF TECHNOLOGY   (Iran)

^b RAZI UNIVERSITY   (Iran)

^c KHARAZMI UNIVERSITY   (Iran)

Author keywords

Hydrophilicty; Mechanical strength; Poly(sulfoxide amide); Polyethersulfone; Preparation

Indexed keywords

HYDROPHILICTY; MECHANICAL STRENGTH; POLY(SULFOXIDE-AMIDE); POLYETHERSULFONE; PREPARATION;

AMIDES; ANGLE MEASUREMENT; ATOMIC FORCE MICROSCOPY; CONTACT ANGLE; MEMBRANES; MICROFILTRATION; PEELING; PERMEATION; POLYCONDENSATION; POTENTIAL ENERGY; POTENTIAL ENERGY SURFACES; SCANNING ELECTRON MICROSCOPY; SURFACE STRUCTURE;

SOLUTION MINING;

DRUG ADDITIVE; NANOMATERIAL; POLY(SULFOXIDE AMIDE); POLYETHERSULFONE; UNCLASSIFIED DRUG;

ARTICLE; ATOMIC FORCE MICROSCOPY; CONTACT ANGLE; CROSSFLOW FILTRATION; HYDROPHILICITY; IMMERSION; MEMBRANE STRUCTURE; MEMBRANE TRANSPORT; NANOPOROSITY; NONHUMAN; PHOSPHORYLATION; POLYMERIZATION; POROSITY; PRECIPITATION; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; WATER PERMEABILITY;

EID: 64049100742     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2009.02.015     Document Type: Article

References (27)

1. Weatherley L.R. Engineering Processes for Bio-Separation (1994), Butterworth-Heinemann, Northern Ireland
2. Tan K., and Obendorf S.K. Surface modification of microporous polyurethane membrane with poly(ethylene glycol) to develop a novel membrane. J. Membr. Sci. 274 (2006) 150
3. Sivakumar M., Malaisamy R., Sajitha C.J., Rangarajan R., and Mohan D. Preparation and performance of cellulose acetate-polyurethane blend membranes and their applications. J. Membr. Sci. 169 (2000) 215
4. Arthanareeswaran G., Sriyamuna Devi T.K., and Raajenthiren M. Effect of silica particles on cellulose acetate blend ultrafiltration membranes: Part I. Sep. Purif. Technol. 64 (2008) 38
5. de Witte P.V., Dijkstra P.J., van den Berg J.W.A., and Feijen J. Phase separation processes in polymer solutions in relation to membrane formation. J. Membr. Sci. 117 (1996) 1
6. Albrecht W., Weigel T.H., Schossig-Tiedemann M., Kneifel K., Peinemann K.V., and Paul D. Formation of hollow inversion using binary mixture of solvents for the preparation of the dope. J. Membr. Sci. 192 (2001) 217
7. Liu Y., Koops G.H., and Strathmann H. Characterization of morphology controlled polyethersulfone hollow fiber membranes by the addition of polyethylene glycol to the dope and bore liquid solution. J. Membr. Sci. 223 (2003) 187
8. Reuvers J., van den Berg J.W.A., and Smolder C.A. Formation of membranes by means of immersion precipitation. Part I. A model to describe mass transfer during immersion precipitation. J. Membr. Sci. 34 (1987) 45
9. Machado P.S.T., Habert A.C., and Borges C.P. Membrane formation mechanism based on precipitation kinetics and membrane morphology: flat and hollow fiber polysulfone membrane. J. Membr. Sci. 155 (1999) 171
10. Chaturvedi B.K., Ghosh A.K., Ramachandran V., Trivedi M.k., Hanar M.S., and Misra B.M. Preparation, characterization and performance of polyethersulfone ultrafiltration membranes. Desalination 133 (2001) 31
11. Boom R.M., Wienk I.M., Van Den Boomgard T., and Smolders C.A. Microstructure in phase inversion membranes. Part II. The role of a polymeric additive. J. Membr. Sci. 73 (1992) 277
12. H.T. Yeo, S.T. Lee, M.J. Han, Role of polymer additive in casting solution in preparation of phase inversion polysulfone membrane, J. Chem. Eng. Jpn. 33 (2000) 180.
13. Jung B., Yoon J.K., Kim B., and Rhee H.W. Effect of molecular weight of polymeric additives on formation, permeation properties and hypochlorite treatment of asymmetric polyacrylonitrile membranes. J. Membr. Sci. 243 (2004) 45
14. Sanchez B.T., Ortiz-Basurto R.I., and Fuente E.B. Effect of nonsolvent on properties of spinning solutions and polyethersulfone hollow fiber ultrafiltration membranes. J. Membr. Sci. 152 (1999) 19
15. Ochoa N.A., Pradanos P., Palacio L., Pagliero C., Marchese J., and Hernandez A. Pore size distributions based on AFM imaging and retention of multidisperse polymer solute: characterisation of polyethersulfone UF membranes with dopes containing different PVP. J. Membr. Sci. 187 (2001) 227
16. Qin J., Oo M.H., and Li Y. Development of high flux polyethersulfone hollow fiber ultrafiltration membranes from a low critical solution temperature dope via hypochlorite treatment. J. Membr. Sci. 247 (2004) 137
17. Deniz S. Characteristics of polycarbonate membranes with polyethylene glycol prepared via dry/wet-phase inversion method. Desalination 200 (2006) 42
18. Kim C., and Lee K.H. Effect of poly(ethylene glycol)200 on the formation of a polyetherimide asymmetric membrane and its performance in aqueous solvent mixture permeation. J. Membr. Sci. 230 (2004) 183
19. Kim H., and Lee K.H. Effect of PES additive on membrane formation by phase inversion. J. Membr. Sci. 138 (1998) 153
20. Idrise A., Zani N.M., and Noordine M.Y. Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weight as additives. Desalination 207 (2007) 324
21. Mahendran R., Malaysamy R., and Mohan D. Preparation, characterization and effect of annealing on performance of cellulose acetate/sulfonated polysulfone and cellulose acetate/epoxy resin blend ultrafiltration membranes. Eur. Polym. J. 40 (2004) 623
22. Rahimpour A., Madaeni S.S., and Mansourpanah Y. The effect of anionic, non-ionic and cationic surfactants on morphology and performance of polyethersulfone ultrafiltration membranes for milk concentration. J. Membr. Sci. 296 (2007) 110
23. Bradford M.M. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal. Biochem. 72 (1976) 248
24. Shockravi A., Alizadeh R., Aghabozorg H., Moghimi A., Rostami E., and Tabrizi S.B. Synthesis and crystal structure determination of 2,2′-sulfinyl-bis(4-methyl phenol) and 2,2′-thio-bis(4-methyl phenol). Phosphorus Sulfur Silicon 178 (2003) 2519
25. Rahimpour A., and Madaeni S.S. Polyethersulfone (PES)/cellulose acetate phthalate (CAP) blend ultrafiltration membranes: preparation, morphology, performance and antifouling properties. J. Membr. Sci. 305 (2007) 299
26. Rahimpour A., Madaeni S.S., and Mehdipour-Ataei S. Synthesis of a novel poly(amide-imide) (PAI) and preparation and characterization of PAI blended polyethersulfone (PES) membranes. J. Membr. Sci. 311 (2008) 349
27. Kesting R.E. Nature of pores in integrally skinned phase inversion membranes. In: Matsuura T., and Sourirajan S. (Eds). Advances in Reverse Osmosis and Ultrafiltration (1964), National Research Council of Canada, Ottawa