Cermets surface transformation under erosive and abrasive wear

Tribology International

Volumn 43, Issue 8, 2010, Pages 1566-1575

  Antonov, Maksim ^a   Hussainova, Irina ^a  

^a TALLINN UNIVERSITY OF TECHNOLOGY   (Estonia)

Author keywords

Cermet; Indentation; Surface structure; Wear

Indexed keywords

ABRASIVE WEARS; APPLIED LOADING; CERAMIC METAL COMPOSITES; CHARACTERISATION; IMPACT ANGLES; INDENTATION SURFACES; INSTRUMENTED INDENTATION; LARGE-GRAIN; MECHANICALLY MIXED LAYERS; MICROSTRUCTURAL FEATURES; MODIFIED LAYER; OPTICAL MICROSCOPES; SCANNING ELECTRON MICROSCOPE; SUBSURFACE LAYER; SUBSURFACE REGIONS; SURFACE TRANSFORMATIONS; TESTING PROCEDURE; WORN SURFACE;

ABRASION; CERMETS; CHROMIUM; DEBRIS; ENERGY DISPERSIVE SPECTROSCOPY; MICROSCOPES; MICROSTRUCTURAL EVOLUTION; NICKEL COMPOUNDS; OPTICAL PROPERTIES; SCANNING ELECTRON MICROSCOPY; TITANIUM CARBIDE; TUNGSTEN CARBIDE; WEAR RESISTANCE;

SURFACE STRUCTURE;

EID: 77953288359     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2009.12.005     Document Type: Article

References (23)

1. Kapoor A., and Franklin F.J. Tribological layers and the wear of ductile materials. Wear 245 (2000) 204-215
2. Li X.Y., and Tandon K.N. Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite. Wear 245 (2000) 148-161
3. Rao R.N., Das S., Mondal D.P., and Dixit G. Dry sliding wear behaviour of cast high strength aluminium alloy (Al-Zn-Mg) and hard particle composites. Wear 267 (2009) 1688-1695
4. Rosenberger M.R., Forlerer E., and Schvezov C.E. Wear behavior of AA1060 reinforced with alumina under different loads. Wear 266 (2009) 356-359
5. Larsson P., Axén N., and Hogmark S. Tribofilm formation on boron carbide in sliding wear. Wear 236 (1999) 73-80
6. Krakhmalev P.V. On the abrasion of ultrafine WC-Co hardmetals by small SiC abrasive. Tribol Lett 30 (2008) 35-39
7. Manoj Kumar B.V., Basu B., Kalin M., and Vizintin J. Load-dependent transition in sliding wear properties of TiCN-WC-Ni cermets. J Am Ceram Soc 90 (2007) 1534-1540
8. Antonov M., Hussainova I., Pirso J., and Volobueva O. Assessment of mechanically mixed layer development during high temperature erosion of cermets. Wear 263 (2007) 878-886
9. Goetzel CG. Cermets. In: ASM metals handbook, vol. 7, Ohio: Metal Park; 1984. p. 798-815.
10. Lassner E., and Schubert W. Tungsten-properties, chemistry, technology of the element, alloys, and chemical compounds (1999), Springer, Berlin
11. Stack M.M., Antonov M.M., and Hussainova I. Some views on the erosion-corrosion response of bulk chromium carbide based cermets. J Phys D Appl Phys 39 (2006) 3165-3174
12. Standard DIN50359. Testing of metallic materials-Universal hardness test. 1997.
13. Malzbender J. Comment on hardness definitions. J Eur Ceram Soc 23 (2003) 1355-1359
14. Wilde H-R, Wehrstedt A. Introduction of martens hardness HM-an internationally accepted designation for "hardness under test force". MP Materials Testing 2000; 11/12: p. 468-70.
15. Huang Y., Aziz M.J., Hutchinson J.W., Evans A.G., Saha R., and Nix W.D. Comparison of mechanical properties of Ni3Al thin films in disordered FCC and ordered L12 phases. Acta Mater 49 (2001) 2853-2861
16. Gubicza J., Juhász A., and Lendvai J. A new method for hardness determination from depth sensing indentation tests. J Mater Res 11 (1996) 2964-2967
17. Hay JL, Pharr GM. Instrumented indentation testing. In: ASM handbook, vol. 8, ASM International; 1994. p. 231-42.
18. Giannakopoulos A.E., and Suresh S. Determination of elastoplastic properties by instrumented sharp indentation. Scr Mater 40 (1999) 1191-1198
19. Pirso J., Viljus M., and Letunovits S. Sliding wear of TiC-NiMo cermets. Tribol Int 37 (2004) 817-824
20. Pilkey W.D. Formulas for stress, strain, and structural matrices. 2nd ed (2005), Wiley, New York
21. Hussainova I., and Antonov M. Assessment of cermets performance in erosive media. Int J Mater Prod Technol 28 (2007) 361-376
22. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7 (1992) 1564-1583
23. Hussainova I., Kübarsepp J., and Pirso J. Mechanical properties and features of erosion of cermets. Wear 250 (2001) 818-825