Film cooling effectiveness and heat transfer near deposit-laden film holes

Proceedings of the ASME Turbo Expo

Volumn 3, Issue PART A, 2009, Pages 539-548

  Lewis, Scott ^a   Barker, Brett ^a   Bons, Jeffrey P ^a   Ai, Weiguo ^b   Fletcher, Thomas H ^b  

^a The Ohio State University   (United States)

^b Brigham Young University   (United States)

Author keywords

Deposition; Film cooling; Roughness

Indexed keywords

BLOWING RATIO; CONVECTIVE HEAT TRANSFER COEFFICIENT; COOLING EFFECTIVENESS; COOLING HOLE; CYLINDRICAL HOLES; DENSITY RATIO; DEPOSITION FILMS; DEPOSITION PATTERNS; FILM COOLING; FILM COOLING EFFECTIVENESS; FILM COOLING HOLE; FILM HOLES; FREE STREAM; FREESTREAM TURBULENCE; HOLE DIAMETER; IN-LINE; INFRA-RED CAMERAS; NET HEAT FLUX; PRIMARY FLOW; ROUGHNESS PEAKS; STEADY STATE TEST; TRANSIENT TESTS; TURBINE BLADE;

COOLANTS; DEPOSITS; HEAT EXCHANGERS; HEAT FLUX; HEAT TRANSFER COEFFICIENTS; REYNOLDS NUMBER; TURBOMACHINE BLADES;

COOLING;

EID: 77953219472     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2009-59567     Document Type: Conference Paper

References (25)

1. Borom, Marcus P., Johnson, Curtis A., and Peluso, Louis A., 1996, "Role of environmental deposits and operating surface temperature in spallation of air plasma sprayed thermal barrier coatings," Surface and Coatings Technology 86-87, pp116-126.
2. Wenglarz, R.A., and Fox, R.G. Jr., 1990, "Physical Aspects of Deposition From Coal-Water Fuels Under Gas Turbine Conditions", Journal of Engineering for Gas Turbines and Power, Jan 1990, pp. 9-14.
3. Tarada, F. and Suzuki, M., 1993, "External Heat Transfer Enhancement to Turbine Blading due to Surface Roughness," presented at ASME IGTI in Cincinnati OH, May 1993, ASME Paper 93-GT-74.
4. f Augmentation for Real Turbine Roughness with Elevated Freestream Turbulence," Transactions of the ASME, vol. 124, OCT 2002, pgs 632-644.
5. Kim, J., Dunn, M.G., and Baran, A.J. et al, 1993, "Deposition of Volcanic Materials in the Hot Sections of Two Gas Turbine Engines," J. Engr. Gas Turbines & Power vol. 115, Jul 1993, pp 641-651. (Pubitemid 23690891)
6. Bons, J.P., Taylor, R., McClain, S., and Rivir, R.B., 2001, "The Many Faces of Turbine Surface Roughness," ASME Journal of Turbomachinery, Vol. 123, Oct. 2001, pp. 739-748.
7. Barlow, D. N., and Kim, Y. W., 1995, "Effect of Surface Roughness on Local Heat Transfer and Film Cooling Effectiveness," Proceedings of ASME TURBOEXPO 1995, ASME Paper No. 95-GT-14.
8. Rutledge, J. L., Robertson, D., and Bogard, D. G., 2006, "Degradation of Film Cooling Performance On a Turbine Vane Suction Side Due To Surface Roughness," Journal of Turbomachinery, Vol. 128, July 2006, pp. 547-554. (Pubitemid 44965689)
9. Goldstein, R. J., Eckert, E. R. G., Chiang, H. D., and Elovic, E., 1985, "Effect of Surface Roughness on Film Cooling Performance," Journal of Engineering for Gas Turbines and Power, Vol. 107, January 1985, pp. 111-116. (Pubitemid 15606935)
10. Bogard, D., Snook, D., and Kohli, A., 2003, "Rough Surface Effects on Film Cooling of the Suction Side Surface of a Turbine Vane," The 2003 ASME IMECE Conference, 2003. Paper No. 2003-42061.
11. Cardwell, N. D., Sundaram, N., and Thole, K. A., 2006, "Effects of Mid-Passage Gap, Endwall Misalignment and Roughness on Endwall Film-Cooling," Journal of Turbomachinery, Vol. 128, Jan. 2006, pp. 62-70.
12. Demling, P., and Bogard, D. G., 2006, "The Effects of Obstructions on Film Cooling Effectiveness on the Suction Side of a Gas Turbine Vane," Proceedings of ASME Turbo Expo 2006: Power for Land, Sea and Air, GT2006-90577.
13. Somawardhana, R. and Bogard, D.G., 2007, "Effects of Surface Roughness and Near Hole Obstructions on Film Cooling Effectiveness," Proceedings of ASME Turbo Expo 2007, ASME Paper No. GT2007- 28004.
14. Sundaram, N. and Thole, K. A., 2006, "Effects of Surface Deposition, Hole Blockage, and TBC Spallation on Vane Endwall Film-Cooling," Proceedings of ASME Turbo Expo 2006: Power for Land, Sea and Air, GT2006-90379
15. Jensen, J. W., Squire, S. W., and Bons, J. P., 2005, "Simulated Land-Based Turbine Deposits Generated in an Accelerated Deposition Facility," ASME J. Turbomach. vol. 127, JULY 2005, pgs 462-470.
16. Crosby, J., Lewis, S., Ai, W., Bons, J.P., and Fletcher, T.H., 2008, "Effects of Temperature and Particle Size on Deposition in Land Based Turbines," ASME Journal of Engineering for Gas Turbines and Power, Sept. 2008, Volume 130, Issue 5, 051503.
17. Antonia, R.A., and Luxton, R.E., 1971, The Response of a Turbulent Boundary Layer to a Step Change in Surface Roughness. Part 1: Smooth to Rough," Journal of Fluid Mechanics, Vol. 48, pp. 721-726.
18. Bons, J.P., Wammack, J.E., Crosby, J., Fletcher, D.H., and Fletcher, T.H., 2008, "Evolution of Surface Deposits on a High Pressure Turbine Blade, Part 2: Convective Heat Transfer," ASME Journal of Turbomachinery, Apr. 2008, Vol. 130, 021021.
19. 2 Injection through Compound Angle Holes using a Transient Liquid Crystal Image Method," ASME Journal of Turbomachinery, Jul. 1997, Vol. 119, pp. 587-593.
20. Schultz, D.L. and Jones, T.V., 1973, "Heat-transfer Measurements in Short-duration Hypersonic Facilities," Advisory Group for Aerospace Research and Development, No. 165, NATO.
21. Bons, J.P., 2009, "Transient Method for Convective Heat Transfer Measurement with Lateral Conduction, Part 1: Analytical Development for Generic Rough Surfaces," ASME J of Heat Transfer, Jan 2009.
22. Bons, J.P., Fletcher, D., and Borchert, B., 2009, "Transient Method for Convective Heat Transfer Measurement with Lateral Conduction, Part 2: Experimental Application to an Isolated Bump," ASME J of Heat Transfer, Jan 2009.
23. Brown, A., and Saluja, C.L., 1979, "Film Cooling from a Single Hole and Row of Holes of Variable Pitch to Diameter Ratio," Int'l J. Heat Mass Transfer, Vol. 22, pp. 525-533.
24. Na, S., and Shih, T. I-P., 2006, "Increasing Adiabatic Film Effectiveness by Using an Upstream Ramp," Proceedings of ASME Turbo Expo 2006: Power for Land, Sea and Air, GT2006-91163.
25. Barigozzi, G., Franchini, G., and Perichizzi, A., 2007, "The Effect of an Upstream Ramp on Cylindrical and Fan-Shaped Hole Film-Cooling - Part II: Adiabatic Effectiveness Results," Proceedings of ASME Turbo Expo 2007: Power for Land, Sea and Air, GT2007-27079.