St and Cf augmentation for real turbine roughness with elevated freestream turbulence

Journal of Turbomachinery

Volumn 124, Issue 4, 2002, Pages 632-644

  Bons, Jeffrey P ^a  

^a AIR FORCE INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Roughness; Turbine; Turbulence

Indexed keywords

COMPUTER SIMULATION; EROSION; FRICTION; HEAT TRANSFER; PARAMETER ESTIMATION; PITTING; REYNOLDS NUMBER; ROUGHNESS MEASUREMENT; TURBULENCE;

FREESTREAM TURBULENCE;

TURBINES;

HEAT TRANSFER; ROUGHNESS; SKIN FRICTION; TURBINE; TURBULENCE;

EID: 0036820845     PISSN: 0889504X     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1505851     Document Type: Article

References (43)

1. Bons, J. P., Taylor, R., McClain, S., and Rivir, R. B., 2001, "The Many Faces of Turbine Surface Roughness." ASME J. Turbomach., 23. pp. 739-748.
2. Acharya, M., Bornstein, J., and Escudier, M., 1986, "Turbulent Boundary Layers on Rough Surfaces," Exp. Fluids, No. 4, pp. 33-47.
3. Taylor, R. P., 1990. "Surface Roughness Measurements on Gas Turbine Blades," ASME J. Turbomach., 112(1), pp. 175-180.
4. Tarada, F., and Suzuki, M., 1993, "External Heat Transfer Enhancement to Turbine Blading due to Surface Roughness," ASME Paper 93-GT-74.
5. Blair, M. F., 1994, "An Experimental Study of Heat Transfer in a Large-Scale Turbine Rotor Passage," ASME J. Turbomach., 116(1), pp. 1-13.
6. Guo, S. M., Jones, T. V., Lock, G. D., and Dancer, S. N., 1998, "Computational Prediction of Heat Transfer to Gas Turbine Nozzle Guide Vanes with Roughened Surfaces," ASME J. Turbomach., 120(2), pp. 343-350.
7. Boynton, J. L., Tabibzadeh, R., and Hudson, S. T., 1993, "Investigation of Rotor Blade Roughness Effects on Turbine Performance," ASME J. Turbomach., 115, pp. 614-620.
8. Suder, K. L., Chima, R. V., Strazisar, A. J., and Roberts, W. B., 1995, "The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor," ASME J. Turbomach., 117, pp. 491-505.
9. Ghenaiet, A., Elder, R. L., and Tan, S. C., "Particles Trajectories through an Axial Fan and Performance Degradation due to Sand Ingestion," ASME Paper No. 2001-GT-497.
10. Bammert, K., and Sandstede, H., 1980, "Measurements of the Boundary Layer Development along a Turbine Blade with Rough Surfaces," ASME J. Eng. Power. 102, pp. 978-983.
11. Turner, A., Tarada, F., and Bayley, F., 1985, "Effects of Surface Roughness on Heat Transfer to Gas Turbine Blades," AGARD-CP-390, pp. 9-1 to 9-9.
12. Hoffs, A., Drost, U., and Boles, A., 1996, "Heat Transfer Measurements on a Turbine Airfoil at Various Reynolds Numbers and Turbulence Intensities Including Effects of Surface Roughness," presented at ASME IGTI in Birmingham, U.K., June 1996. ASME Paper No. 96-GT-169.
13. Abuaf, N., Bunker, R. S., and Lee, C. P., 1998. "Effects of Surface Roughness on Heat Transfer and Acrodynamic Performance of Turbine Airfoils." ASME J. Turbomach., 120(3), pp. 522-529.
14. Pinson, M. W., and Wang, T., 2000, "Effect of Two-Scale Roughness on Boundary Layer Transition over a Heated Flat Plate: Part 1 - Surface Heat Transfer." ASME J. Turbomach., 122(2), pp. 301-307.
15. Goldstein, R., Eckert, E., Chiang, H., and Elovic, E., 1985, "Effect of Surface Roughness on Film Cooling Performance." ASME J. Eng. Gas Turbines Power, 107, pp. 111-116.
16. Pinson, M. W., and Wang, T., 1997, "Effects of Leading Edge Roughness on Fluid Flow and Heat Transfer in the Transitional Boundary Layer over a Flat Plate," Int. J. Heat Mass Transf., 40(12), pp. 2813-2823.
17. Taylor, R. P., Scaggs, W. F., and Coleman, H. W., 1988, "Measurement and Prediction of the Effects of Nonuniform Surface Roughness on Turbulent Flow Friction Coefficients," ASME J. Fluids Eng., 110, pp. 380-384.
18. Hosni, M. H., Coleman, H. W., and Taylor, R. P., 1991, "Measurements and Calculations of Rough-Wall Heat Transfer in the Turbulent Boundary Layer," Int. J. Heat Mass Transf. 34(4/5). pp. 1067-1082.
19. Scaggs, W. F., Taylor, R. P., and Coleman, H. W., 1988, "Measurement and Prediction of Rough Wall Effects on Friction Factor - Uniform Roughness Results," ASME J. Fluids Eng., 110, pp. 385-391.
20. Bogard, D. G., Schmidt, D. L., and Tabbita, M., 1998, "Characterization and Laboratory Simulation of Turbine Airfoil Surface Roughness and Associated Heat Transfer," ASME J. Turbomach., 120(2), pp. 337-342.
21. Barlow, D. N., and Kim, Y. W., 1995, "Effect of Surface Roughness on Local Heat Transfer and Film Cooling Effectiveness," ASME Paper No. 95-GT-14.
22. Kitheart, M. E., and Klett, D. E., 1997, "Heat Transfer and Skin Friction Comparison of Dimpled Versus Protrusion Roughness," NASA N97-27444, pp. 328-336.
23. Sigal, A., and Danberg, J., 1990, "New Correlation of Roughness Density Effect on the Turbulent Boundary Layer," AIAA J., 28(3), pp. 554-556.
24. Nikuradse, J., 1933, "Laws for Flows in Rough Pipes," VDI-Forchungsheft 361, Series B, Vol. 4. (English trans. NACA TM 1292, 1950).
25. Antonia, R. A., and Luxton, R. E., 1971, "The Response of a Turbulent Boundary Layer to a Step Change in Surface Roughness. Part 1: Smooth to Rough." J. Fluid Mech. 48, pp. 721-726.
26. Taylor, R. P., and Chakroun, W. M., 1992, "Heat Transfer in the Turbulent Boundary Layer with a Short Strip of Surface Roughness," AIAA Paper No. 92-0249.
27. Schultz, D. L., and Jones, T. V., 1973, "Heat-transfer Measurements in Short-duration Hypersonic Facilities," Advisory Group for Aerospace Research and Development, No. 165, NATO.
28. Drab, J. W., and Bons, J. P., 2002, "Turbine Blade Surface Roughness Effects on Shear Drag and Heat Transfer," AIAA Paper No. 2002-0085.
29. Mills, A. F., Heat Transfer, 1st Edition, 1992, Irwin, IL.
30. White, F. M., Viscous Fluid Flow, 2nd Edition, 1991, McGraw-Hill, New York, NY.
31. Kays, W. M., and Crawford, M. E., Convective Heat and Mass Transfer, 3rd Edition, 1993, McGraw-Hill, New York, NY.
32. Schlichting, H., Boundary Layer Theory, 7th Edition, 1979, McGraw-Hill, New York, NY.
33. Dipprey, D. F., and Sabersky, R. H., 1963, "Heat and Momentum Transfer in Smooth and Rough Tubes at Various Prandtl Numbers," Int. J. Heat Mass Transfer, 6, pp. 329-353.
34. Wassel, A. T., and Mills, A. F., 1979, "Calculation of Variable Property Turbulent Friction and Heat Transfer in Rough Pipes," ASME J. Heat Transfer, 101, pp. 469-474.
35. Mahmood, G. J., Hill, M. L., Nelson, D. L., Ligrani, P. M., Moon, H.-K., and Glezer, B., 2000, "Local Heat Transfer and Flow Structure on and Above a Dimpled Surface in a Channel," ASME Paper No. 2000-GT-230 presented at ASME TURBOEXPO, Munich, Germany, May.
36. Pinson, M. W., and Wang, T., 2000, "Effect of Two-Scale Roughness on Boundary Layer Transition over a Heated Flat Plate: Part 1 - Surface Heat Transfer," ASME J. Turbomach., 122, pp. 301-307.
37. Pedisius, A. A., Kazimekas, V.A., and Slanciauskas, A. A., 1979, "Heat Transfer from a Plate to a High-Turbulence Air Flow," Soviet Research 11, pp. 125-134.
38. Maciejewski, P. K., and Moffat, R. J., 1992, "Heat Transfer with Very High Free-Stream Turbulence: Part 1 - Experimental Data," ASME J. Heat Transfer, 114, pp. 827-833.
39. Blair, M. F., 1983, "Influence of Free-Stream Turbulence on Turbulent Boundary Layer Heat Transfer and Mean Profile Development: Part II - Analysis of Results," ASME J. Heat Transfer, 105, pp. 41-47.
40. Baskaran, V., Abdellatif, O. E. and Bradshaw, P., 1989, "Effects of Free-Stream Turbulence on Turbulent Boundary Layers with Convective Heat Transfer," presented at the 7th Symposium on Turbulent Shear Flows, Stanford Univ., CA, Aug.
41. Simonich, J. C., and Bradshaw, P., 1978, "Effect of Free-Stream Turbulence on Heat Transfer Through a Turbulent Boundary Layer," ASME J. Heat Transfer, 100, pp. 671-677.
42. Thole, K. A., and Bogard, D. G., 1985, "Enhanced Heat Transfer and Shear Stress due to High Free-Stream Turbulence," ASME J. Turbomach., 117, pp. 418-424.
43. Sahm, M. K., and Moffat, R. J., 1992, "Turbulent Boundary Layers with High Turbulence: Experimental Heat Transfer and Structure on Flat and Convex Walls," Stanford University Report HMT-45.