Fabrication of graded structures in SiC-reinforced metal matrix by semisolid powder processing

Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009

Volumn 1, Issue , 2009, Pages 635-640

  Wu, Yufeng ^a   Kim, Gap Yong ^a   Anderson, Iver ^a,b   Lograsso, Thomas ^b  

^a Iowa State University of Science and Technology   (United States)

^b IOWA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPLEX PROCESSING; COMPOSITE CONTROL; FUNCTIONALLY GRADED STRUCTURE; GRADED STRUCTURE; HIGH COSTS; INNOVATIVE SOLUTIONS; INTERFACE BONDING; MATERIALS ENGINEERING; MATRIX; MATRIX PHASE; METAL MATRICES; METAL POWDER; MICROSTRUCTURES AND MECHANICAL PROPERTIES; NOVEL SOLUTIONS; POWDER PROCESSING; SEMI-SOLID FORMING; SIC PARTICLES; TWO LAYERS;

FABRICATION; FUNCTIONALLY GRADED MATERIALS; INNOVATION; MECHANICAL PROPERTIES; PHASE INTERFACES; POWDER METALLURGY; PROCESSING; SILICON CARBIDE;

POWDER METALS;

EID: 77953183715     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/MSEC2009-84331     Document Type: Conference Paper

References (36)

1. Sanchez-Herencia, A. J., 2000, "Electrical Transport Properties in Zirconia/Alumina Functionally Graded Materials," Journal of the European Ceramic Society, 20(10), pp. 1611-1620.
2. Bever, M. B., and Duwez, P. E., 1972, "Gradients in Composite-Materials," Materials Science and Engineering, 10(1), pp. 1-&.
3. Birman, V., 2007, "Modeling and Analysis of Functionally Graded Materials and Structures," Applied mechanics reviews, 60(1), pp. 195-216. (Pubitemid 351552943)
4. Movchan, B. A., 2002, "Functionally Graded Eb Pvd Coatings," Surface & coatings technology, 149(2), pp. 252-262.
5. Basu, S. N., 2008, "Functionally Graded Chemical Vapor Deposited Mullite Environmental Barrier Coatings for Si-Based Ceramics," Journal of the European Ceramic Society, 28(2), pp. 437-445.
6. Vaidya, R. U., 2002, "Use of Plasma Spraying in the Manufacture of Continuously Graded and Layered/Graded Molybdenum Disilicide/Alumina Composites," Journal of thermal spray technology, 11(3), pp. 409-414.
7. Smurov, I., 2008, "Laser Cladding and Laser Assisted Direct Manufacturing," Surface & coatings technology, 202(18), pp. 4496-4502. (Pubitemid 351729120)
8. Sidky, P. S., 1999, "Review of Inorganic Coatings and Coating Processes for Reducing Wear and Corrosion," British Corrosion Journal, 34(3), pp. 171-183.
9. Ruigang, W., 2002, "Investigation of the Physical and Mechanical Properties of Hot-Pressed Machinable Si〈Sub〉3〈/ Sub〉N〈Sub〉4〈/Sub〉/H-Bn Composites and Fgm," Materials science & engineering. B, Solid-state materials for advanced technology, 90(3), pp. 261-268.
10. Kawasaki, A., 1997, "Concept and P/M Fabrication of Functionally Gradient Materials," Ceramics international, 23(1), pp. 73-83.
11. Chu, J., 1993, "Slip Casting of Continuous Functionally Gradient Material," Journal of the Ceramic Society of Japan, 101(7), pp. 818-820.
12. Rodriguez-Castro, R., 2002, "Processing and Microstructural Characterization of Functionally Gradient Al A359/Sic〈Sub〉P〈/ Sub〉 Composite," Journal of Materials Science, 37(9), pp. 1813-1821.
13. Watanabe, Y., 1998, "Control of Composition Gradient in a Metal-Ceramic Functionally Graded Material Manufactured by the Centrifugal Method," Composites. Part A, Applied science and manufacturing, 29(5), pp. 595-601.
14. Gupta, M., 2002, "Synthesis and Characterization of a Free-Standing, One-Dimensional, Al-Cu/Sic-Based Functionally Graded Material," Journal of Materials Synthesis and Processing, 10(2), pp. 75-81.
15. Corbin, S. F., 1999, "Functionally Graded Metal/Ceramic Composites by Tape Casting, Lamination and Infiltration," Materials science & engineering. A, Structural materials, 262(1), pp. 192-203.
16. Pech-Canul, M. I., 2002, "Effect of Processing Parameters on the Production of Bilayer-Graded Al/Sic〈Sub〉P〈/Sub〉 Composites by Pressureless Infiltration," Materials letters, 56(4), pp. 460-464.
17. Song, D. H., Park, Y. H., Park, Y. H., Park, I. M., and Cho, K. M., 2007, "Thermomechanical Properties of Functionally Graded Al-Sicp Composites," Materials Science Forum, 534-536(pp. 1565-1568.
18. Pech-Canul, M. I., Parras-Medecigo, E. E., and Rodriguez-Reyes, M., 2002,
19. Velhinho, A., Sequeira, P. D., Braz Fernandes, F., Botas, J. D., and Rocha, L. A., 2003, "Al/Sicp Functionally Graded Metal-Matrix Composites Produced, by Centrifugal Casting: Effect of Particle Grain Size on Reinforcement Distribution," Materials Science Forum, v 423-425(pp. 257-262.
20. Rodriguez-Castro, R., 2002, "Microstructure and Mechanical Behavior of Functionally Graded Al A359/Sic〈Sub〉P〈/Sub〉 Composite," Materials science & engineering. A, Structural materials, 323(1), pp. 445-456.
21. Watari, F., 1997, "Fabrication and Properties of Functionally Graded Dental Implant," Composites. Part B, Engineering, 28(1), pp. 5-11. (Pubitemid 127379738)
22. Lin, C. Y., 1999, "Production of Silicon Carbide Al 2124 Alloy Functionally Graded Materials by Mechanical Powder Metallurgy Technique," Powder metallurgy, 42(1), pp. 29-33.
23. Cho, K.-M., Choi, I.-D., and Park, I., 2004, "Thermal Properties and Fracture Behavior of Compositionally Graded Al-Sicp Composites," Materials Science Forum, 449-452(1), pp. 621-624.
24. Corbin, S. F., 2003, "Cladding of an Fe-Aluminide Coating on Mild Steel Using Pulsed Laser Assisted Powder Deposition," Materials science & engineering. A, Structural materials, 354(1), pp. 48-57.
25. Krantz, T., 2004, "Increased Surface Fatigue Lives of Spur Gears by Application of a Coating," Journal of mechanical design, 126(6), pp. 1047-1054.
26. Ramalingam, S., 1984,
27. Zu, L., and Luo, S., 2001, "Study on the Powder Mixing and Semi-Solid Extrusion Forming Process of Sicp/2024al Composites," Journal of Materials Processing Technology, 114(3), pp. 189-193.
28. Luo, S., Cheng, Y., and Du, Z., 2005, "Ceramics Matrix Composites Thixoforming in Pseudo-Semi-Solid State and the Preliminary Experimental Study," Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 19(1), pp. 107-112.
29. Chen, C. M., Yang, C. C., and Chao, C. G., 2005, "Dry Sliding Wear Behaviors of Al-25si-2.5cu-1 mg Alloys Prepared by Powder Thixocasting," Materials Science and Engineering A, 397(1-2), pp. 178-189.
30. Chen, C. M., Yang, C. C., and Chao, C. G., 2004, "Thixocasting of Hypereutectic Al-25si-2.5cu-1mg-0.5mn Alloys Using Densified Powder Compacts," Materials Science and Engineering A, 366(1), pp. 183-194.
31. Chen, C. M., Yang, C. C., and Chao, C. G., 2005, "A Novel Method for Net-Shape Forming of Hypereutectic Al-Si Alloys by Thixocasting with Powder Preforms," Journal of Materials Processing Technology, 167(1), pp. 103-109.
32. Yasue, K., 2000, "Elemental Blended Powders Semisolid Forming of Ti-Al Based Alloys," Journal of Materials Science, 35(23), pp. 5927-5932. (Pubitemid 32085056)
33. Wen, C. E., 2001, "Fabrication of Tial by Blended Elemental Powder Semisolid Forming," Journal of Materials Science, 36(7), pp. 1741-1745.
34. Young, R. M. K., and Clyne, T. W., 1986, "A Powder-Based Approach to Semisolid Processing of Metals for Fabrication of Die-Castings and Composites," Journal of Materials Science, 21(3), pp. 1057-1069.
35. Young, R. M. K., and Clyne, T. W., 1986, "A Powder Mixing and Preheating Route to Slurry Production for Semisolid Diecasting," Powder metallurgy, 29(3), pp. 195-199.
36. Ward, P. J., Atkinson, H. V., Anderson, P. R. G., Elias, L. G., Garcia, B., Kahlen, L., and Rodriguezibabe, J. M., 1996, "Semi-Solid Processing of Novel Mmcs Based on Hypereutectic Aluminium-Silicon Alloys," Acta Materialia, 44(5), pp. 1717-1727. (Pubitemid 126329130)