On the B-spline interpolated tool trajectories for five-axis sculptured surface machining

International Journal of Manufacturing Research

Volumn 1, Issue 2, 2006, Pages 198-212

  Tutunea Fatan, O Remus ^a   Feng, Hsi Yung ^a  

^a UNIVERSITY OF WESTERN ONTARIO   (Canada)

Author keywords

B spline interpolation; five axis machining; machine tool joints; sculptured surface; synchronisation

Indexed keywords

EID: 77953144165     PISSN: 17500591     EISSN: 17500605     Source Type: Journal    
DOI: 10.1504/ijmr.2006.011353     Document Type: Article

References (25)

1. Arnone, M. (1998) High Performance Machining. Cincinnati, OH: Hanser Gardner.
2. Bahr, B., Xiao, X. and Krishnan, K. (2001) ‘A real-time scheme of cubic parametric curve interpolations for CNC systems’, Computers in Industry, Vol. 45, pp.309–317.
3. Cheng, M.Y., Tsai, M.C. and Kuo, J.C. (2002) ‘Real-time NURBS command generators for CNC servo controllers’, Int. J. Machine Tools and Manufacture, Vol. 42, pp.801–813.
4. Chou, J.J. and Yang, D.C.H. (1992) ‘On the generation of coordinated motion of five-axis CNC/CMM machines’, ASME Journal of Engineering for Industry, Vol. 114, pp.15–22.
5. Farouki, R.T. and Sakkalis, I. (1990) ‘Pythagorean hodographs’, IBM Journal of Research and Development, Vol. 34, pp.736–752.
6. Fleisig, R.V. and Spence, A.D. (2001) ‘Constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining’, Computer-Aided Design, Vol. 33, pp.1–15.
7. Ge, Q.J. (1996) ‘Kinematics-driven geometric modeling: a framework for simultaneous NC tool-path generation and sculptured surface design’, Paper presented at the IEEE International Conference on Robotics and Automation, Minneapolis, MN, April, Vol. 2, pp.1819–1824. In proceedings.
8. Herweck, P. (1996) ‘Siemens Sinumerik 840-D increases machine tool productivity by 50%’, Siemens Automation Technology, Fourth Quarter.
9. Juttler, B. (1994) ‘Visualization of moving objects using dual quaternion curves’, Computers and Graphics, Vol. 18, pp.315–326.
10. Langeron, J.M., Duc, E., Lartigue, C. and Bourdet, P. (2004) ‘A new format for 5-axis tool path computation, using B-spline curves’, Computer-Aided Design, Vol. 36, pp.1219–1229.
11. Lartigue, C., Thiebaut, F. and Maekawa, T. (2001) ‘CNC tool path in terms of B-spline curves’, Computer-Aided Design, Vol. 33, pp.307–319.
12. Liang, H., Hong, H. and Svoboda, J. (2002) ‘A combined 3D linear and circular interpolation technique for multi-axis CNC machining’, ASME Journal of Manufacturing Science and Engineering, Vol. 124, pp.305–312.
13. Lin, R.S. and Koren, Y. (1996) ‘Real-time interpolators for multi-axis CNC machine tools’, CIRP Journal of Manufacturing Systems, Vol. 25, pp.145–149.
14. Muller, M., Erdos, G. and Xirouchakis, P. (2004) ‘High accuracy spline interpolation for 5-axis machining’, Computer-Aided Design, Vol. 36, pp.1379–1393.
15. Piegl, L.A. and Tiller, W. (1997) The NURBS Book (2nd ed.). New York: Springer-Verlag.
16. Sarma, R. and Rao, A. (2000) ‘Discretizors and interpolators for five-axis CNC machines’, ASME Journal of Manufacturing Science and Engineering, Vol. 122, pp.191–197.
17. Shima, A., Sasaki, T., Ohtsuki, T. and Wakinotani, Y. (1996) ‘64-bit RISC-based series 15 NURBS interpolation’, Fanuc Technical Review, Vol. 9, pp.23–28.
18. Srinivasan, L.N. and Ge, Q.J. (1996) ‘Parametric continuous and smooth motion interpolation’, ASME Journal of Mechanical Design, Vol. 118, pp.494–498.
19. Tikhon, M., Ko, T.J., Lee, S.H. and Kim, H.S. (2004) ‘NURBS interpolator for constant material removal rate in open NC machine tools’, Int. J. Machine Tools and Manufacture, Vol. 44, pp.237–245.
20. Tiller, W. (1992) ‘Knot-removal algorithms for NURBS curves and surfaces’, Computer-Aided Design, Vol. 24, pp.445–453.
21. Tsai, M.C., Cheng, C.W. and Cheng, M.Y. (2003) ‘A real-time NURBS surface interpolator for precision three-axis CNC machining’, Int. J. Machine Tools and Manufacture, Vol. 43, pp.1217–1227.
22. Tutunea-Fatan, O.R. and Feng, H-Y. (2004) ‘Configuration analysis of five-axis machine tools using a generic kinematic model’, Int. J. Machine Tools and Manufacture, Vol. 44, pp.1235–1243.
23. Tutunea-Fatan, O.R. and Feng, H-Y. (2005) ‘Determination of geometry-based errors for interpolated tool paths in five-axis surface machining’, ASME Journal of Manufacturing Science and Engineering, Vol. 127, pp.60–67.
24. Vickers, G.W. and Quan, K.W. (1989) ‘Ball-mills versus end-mills for curved surface machining’, ASME Journal of Engineering for Industry, Vol. 111, pp.22–26.
25. Yau, H.T. and Kuo, M.J. (2001) ‘NURBS machining and feed rate adjustment for high-speed cutting of complex sculptured surfaces’, Int. J. Production Research, Vol. 39, pp.21–41.