Experimental nanoindentation of BCC metals

Mechanics Research Communications

Volumn 37, Issue 3, 2010, Pages 307-314

  Voyiadjis, George Z ^a   Almasri, Amin H ^b   Park, Taehyo ^c  

^a LOUISIANA STATE UNIVERSITY   (United States)

^b JORDAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Jordan)

^c Hanyang University   (South Korea)

Author keywords

BCC metals; Hardness; Nano indentation

Indexed keywords

BCC METALS; BERKOVICH INDENTERS; BODY-CENTERED CUBIC; CONTINUOUS STIFFNESS MEASUREMENT; EXPERIMENTAL STUDIES; HARDNESS MEASUREMENT; INDENTATION DEPTH; INDENTATION SIZE EFFECTS; NANO SCALE; NANOINDENTATION TESTS; POWER LAW MODEL; STRAIN GRADIENTS;

COMPUTER SIMULATION; GRAIN BOUNDARIES; HARDNESS; METALS; MOLYBDENUM; NANOINDENTATION; TANTALUM; TUNGSTEN;

VICKERS HARDNESS TESTING;

EID: 77953134112     PISSN: 00936413     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechrescom.2010.02.001     Document Type: Article

References (48)

1. Abed F.H., and Voyiadjis G.Z. A consistent modified Zerilli-Armstrong flow stress model for BCC and FCC metals for elevated temperatures. Acta Mechanica 175 1-4 (2005) 1-18
2. Abu Al-Rub R.K., and Voyiadjis G.Z. Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments. International Journal of Plasticity 20 6 (2004) 1139-1182
3. Almasri A.H., and Voyiadjis G.Z. Physically based constitutive model for body centered cubic metals with applications to Iron. Journal of Engineering Mechanics 134 7 (2007) 521-529
4. Almasri A.H., and Voyiadjis G.Z. Nanoindentation in FCC Metals: Experimental Study. Acta Mechanica 209 1-2 (2010) 1-10
5. Anand L., and Ames N.M. On modeling the micro-indentation response of an amorphous polymer. International Journal of Plasticity 22 (2006) 1123-1170
6. Ascheron C., Huse C., Kuhn G., and Neumann H. Microhardness of Sn-doped in P. Crystal Research and Technology 24 2 (1989) 33-35
7. Beaudoin A.J., and Acharya A. A model for rate-dependent flow of metal polycrystals based on the slip plane lattice incompatibility. Materials Science and Engineering A (2001) 411-415
8. Beghini M., Bertini L., and Fontanari V. Evaluation of the stress-strain curve of metallic materials by spherical indentation. International Journal of Solids and Structures 43 (2006) 2441-2459
9. Cao Y.P., Qian X.Q., and Huber N. Spherical indentation into elastoplastic materials: indentation-response based definitions of the representative strain. Materials Science and Engineering A454 (2007) 1-13
10. Chong A.C.M., and Lam D.C.C. Strain gradient plasticity effect in indentation hardness of polymers. Journal of Materials Research 14 10 (1999) 4103-4110
11. Cordill M.J., Moody N.R., and Gerberich W.W. The role of dislocation walls for nanoindentation to shallow depths. International Journal of Plasticity 25 (2009) 281-301
12. Delince M., Jacques P.J., and Pardoen T. Separation of size-dependent strengthening contributions in fine-grained dual phase steels by nanoindentation. Acta Materialia 54 (2006) 3395-3404
13. Fornell J., Concustell A., Surinach S., Li W.H., Cuadrado N., Gebert A., Bar M.D., and So J. Yielding and intrinsic plasticity of TiZrNiCuBe bulk metallic glass. International Journal of Plasticity 25 (2009) 1540-1559
14. Greer J.R., Weinberger C.R., and Cai W. Comparing the strength of fcc and bcc sub-micrometer pillars: compression experiments and dislocation dynamics simulations. Materials Science and Engineering A 493 (2008) 21-25
15. Guille J., and Sieskind M. Microindentation studies on BaFCl single crystals. Journal of Materials Science 26 4 (1991) 899-903
16. Hay, J.L., Pharr, G.M., 2000. Instrumented indentation testing. In: Kuhn, H., Medlin, D. (Eds.), ASM Handbook, vol. 8, Mechanical Testing and Evaluation, Materials Park OH, pp. 232-243.
17. He M.Y., Odette G.R., Yamamoto T., and Klingensmith D. A universal relationship between indentation hardness and flow stress. Journal of Nuclear Materials 367 (2007) 556-560
18. Hendrix B.C. The use of shape correction factors for elastic indentation measurements. Journal of Materials Research 10 2 (1995) 255-257
19. Hernot X., Bartier O., Bekouche Y., El Abdi R., and Mauvoisin G. Inuence of penetration depth and mechanical properties on contact radius determination for spherical indentation. International Journal of Solids and Structures 43 (2006) 4136-4153
20. Jiang P., Zhang T., Feng Y., Yang R., and Liang N. Determination of plastic properties by instrumented spherical indentation: Expanding cavity model and similarity solution approach. Journal of Materials Research 24 (2009) 1045-1053
21. Joslin D.L., and Oliver W.C. A new method for analyzing data from continuous depth-sensing microindentation tests. Journal of Materials Research 5 1 (1990) 123-126
22. Liu Z.L., Liu X.M., Zhuang Z., and You X.C. A multi-scale computational model of crystal plasticity at submicron-to-nanometer scales. International Journal of Plasticity 25 (2009) 1436-1455
23. Ma Q., and Clarke D.R. Size dependent hardness in silver single crystals. Journal of Materials Research 10 (1995) 853-863
24. McElhaney K.W., Valssak J.J., and Nix W.D. Determination of indenter tip geometry and indentation contact area for depth sensing indentation experiments. Journal of Materials Research 13 (1998) 1300-1306
25. Milman Y.V. Plasticity characteristic obtained by indentation. Journal of Physics D: Applied Physics 41 (2008) 074013
26. Nix W.D., and Gao H. Indentation size effects in crystalline materials: a law for strain gradient plasticity. Journal of Mechanics and Physics of Solids 46 3 (1998) 411-425
27. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research 7 6 (1992) 1564-1583
28. Sayan P., and Ulrich J. Effect of various impurities on the hardness of NaCl crystals. Crystal Research and Technology 36 11 (2001) 1253-1262
29. Shi Z., Feng X., Huang Y., Xiao J., and Hwang K.C. The equivalent axisymmetric model for Berkovich indenters in power-law hardening materials. International Journal of Plasticity 26 1 (2010) 141-148
30. Sneddon I.N. The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. International Journal of Engineering Science 3 (1965) 47-57
31. Sridhar M.R., and Yovanovich M.M. Empirical methods to predict Vickers microhardness. Wear 193 1 (1996) 91-98
32. Stelmashenko N.A., Walls M.G., Brown L.M., and Milman Y.V. Microindentation on W and Mo oriented single crystals: an STM study. Acta Metallurgica et Materialia 41 (1993) 2855-2865
33. Tabor D. The Hardness of Metals (1951), Clarendon Press, Oxford
34. Tickoo R., Tandon R.P., Bamzai K.K., and Kotru P.N. Microindentation studies on samarium-modified lead titanate ceramics. Materials Chemistry and Physics 80 2 (2003) 446-451
35. Vadalakonda S., Banerjee R., Puthcode A., and Mirshams R. Comparison of incipient plasticity in bcc and fcc metals studied using nanoindentation. Materials Science and Engineering A 426 1-2 (2006) 208-213
36. Vengatesan B., Kanniah H., and Ramasvamy P. Microhardness and crack patterns of CVT grown CdGa2S4 single crystals. Journal of Materials Science Letters 5 10 (1986) 987-988
37. Voyiadjis G.Z., and Abed F.H. Microstructural based models for BCC and FCC metals with temperature and strain rate dependency. Mechanics of Materials 37 (2005) 355-378
38. Voyiadjis G.Z., and Abed F.H. A coupled temperature and strain rate dependent yield function for dynamic deformations of BCC metals. International Journal of Plasticity 22 8 (2006) 1398-1431
39. Voyiadjis G.Z., and Abu Al-Rub R.K. Length Scales in Gradient Plasticity. In: Ahzi S., Cherkaoui M., Khaleel M.A., Zbib H.M., Zikry M.A., and LaMatina B. (Eds). Proceedings of the IUTAM Symposium on Multiscale Modeling and Characterization of Elastic-Inelastic Behavior of Engineering Materials (2002), Kluwer Academic Publishers, Morocco 167-174
40. Voyiadjis G.Z., and Abu Al-Rub R.K. Gradient plasticity theory with a variable length scale parameter. International Journal of Solids and Structures 42 14 (2005) 3998-4029
41. Voyiadjis G.Z., and Abu Al-Rub R.K. Nonlocal gradient-dependent thermodynamics for modeling scale dependent plasticity. International Journal for Multiscale Computational Engineering 5 3-4 (2007) 295-323
42. Voyiadjis G.Z., and Almasri A.H. Variable material length scale associated with nano indentation experiments. Journal of Engineering Mechanics 135 3 (2009) 139-148
43. Voyiadjis G.Z., and Deliktas B. Mechanics of strain gradient plasticity with particular reference to decomposition of the state variables into energetic and dissipative components. International Journal of Engineering Science 47 (2009) 1405-1423
44. Voyiadjis G.Z., and Deliktas B. Formulation of strain gradient plasticity with interface energy in a consistent thermodynamic framework. International Journal of Plasticity 25 19 (2009) 1997-2024
45. Voyiadjis G.Z., and Peters R. Size effects in nano-indentation an experimental and analytical study. Acta Mechanica (2010) 10.1007/s00707-009-0222-z
46. Wenyi Y., Sun Q.P., Feng X.Q., and Qian L.M. Analysis of spherical indentation of superelastic shape memory alloys. International Journal of Solids and Structures 44 (2007) 1-17
47. Yang B., and Vehoff H. Dependence of nanohardness upon indentation size and grain size-a local examination of the interaction between dislocations and grain boundaries. Acta Materialia 55 (2007) 849-856
48. Zerilli F.J., and Armstrong R.W. Dislocation-mechanics-based constitutive relations for material dynamics calculation. Journal of Applied Physics 61 5 (1987) 1816-1825