Variable material length scale associated with nanoindentation experiments

Journal of Engineering Mechanics

Volumn 135, Issue 3, 2009, Pages 139-148

  Voyiadjis, George Z ^a   Almasri, Amin H ^b  

^a Louisiana State University   (United States)

^b TAFILA TECHNICAL UNIVERSITY   (Jordan)

Author keywords

Experimentation; Length; Material tests; Metals

Indexed keywords

BOUNDARY LAYER FLOW; HARDNESS TESTING; MATERIALS; METAL CLADDING; NANOINDENTATION; OXYGEN;

DISLOCATION DENSITIES; EQUIVALENT STRAINS; EXPERIMENTAL OBSERVATIONS; EXPERIMENTATION; GRADIENT THEORIES; HARDNESS TESTS; LENGTH; LENGTH-SCALE; MATERIAL LENGTH SCALE; MATERIAL TESTS; NANOINDENTATION EXPERIMENTS; NON LOCALS; OXYGEN-FREE HIGH CONDUCTIVITY COPPERS; PHYSICALLY BASED; TEMPERATURE DEPENDENCIES; TEMPERATURE EFFECTS;

STRAIN RATE;

EXPERIMENTAL STUDY; HARDNESS; STRAIN RATE;

EID: 60649089289     PISSN: 07339399     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9399(2009)135:3(139)     Document Type: Article

References (49)

1. Abed, F. H., and Voyiadjis, G. Z. (2007). "Thermodynamic consistent formulations of viscoplastic deformations in FCC metals." J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2007)133:1(76), 133(1), 76-86.
2. Abu Al-Rub, R. K., and Voyiadjis, G. Z. (2004). "Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments." Int. J. Plast. IJPLER0749-641910.1016/ j.ijplas.2003.10.007, 20(6), 1139-1182.
3. Aifantis, E. C. (1992). "On the role of gradients in the localization of deformation and fracture." Int. J. Eng. Sci. IJESAN0020-722510.1016/0020-7225(92)90141-3, 30, 1279-1299.
4. Almasri, A. H., and Voyiadjis, G. Z. (2007a). "Constitutive modeling of BCC metals: Application to ingot iron." Proc., McMat2007 Conf., Univ. of Texas at Austin, Austin, Tex.
5. Almasri, A. H., and Voyiadjis, G. Z. (2007b). "The effect of strain rate on the dynamic hardness in metals." J. Eng. Mater. Technol. JEMTA80094-428910.1115/1.2744430, 129(4), 505-512.
6. Almasri, A. H., and Voyiadjis, G. Z. (2008). "A physically based constitutive model for BCC metals with applications to iron." J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2008)134:7(521), 134(7), 521-529.
7. Arsenlis, A., and Parks, D. M. (1999). "Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density." Acta Mater. ACMAFD1359-645410.1016/S1359-6454(99)00020-8, 47, 1597-1611.
8. Ascheron, C., Huse, C., Kuhn, G., and Neumann, H. (1989). "Microhardness of Sn-doped In P." Cryst. Res. Technol. CRTEDF0232-1300, 24(2), 33-35.
9. Bammann, D. J., Mosher, D., Hughes, D. A., Moody, N. R., and Dawson, P. R. (1999). "Using spatial gradients to model localization phenomena." Sandia National Laboratories Rep. No. SAND99-8588, Albuquerque, N.M.
10. Begley, M. R., and Hutchinson, J. W. (1998). "The mechanics of size dependent indentation." J. Mech. Phys. Solids JMPSA80022-5096, 35(9), 2049-2068.
11. Benallal, A., Fudoli, C. A., and Venturini, W. S. (2002). "An implicit BEM formulation for gradient plasticity and localization phenomena." Int. J. Numer. Methods Eng. IJNMBH0029-5981, 53, 1853-1869.
12. Berthier, L., (2005). "Direct experimental evidence of a growing length scale accompanying the glass transition." Science SCIEAS0036-807510.1126/science.1120714, 310(5755), 1797-1800.
13. Boria, R. I. (2002). "Finite element simulation of strain localization with large deformation: Capturing strong discontinuity using a Petrov-Galerkin multiscale formulation." Comput. Methods Appl. Mech. Eng. CMMECC0045-7825, 191, 2949-2978.
14. Chong, A. C. M., and Lam, D. C. C. (1999). "Strain gradient plasticity effect in indentation hardness of polymers." J. Mater. Res. JMREEE0884-2914, 14(10), 4103-4110.
15. Das, S. P. (2000). "Dynamic length scales and feedback from long-time structural relaxation in a simple liquid." J. Phys.: Condens. Matter JCOMEL0953-898410.1088/0953-8984/12/29/314, 12, 6423-6430.
16. de Borst, R., and Mühlhaus, H. B. (1992). "Gradient-dependent plasticity formulation and algorithmic aspects." Int. J. Numer. Methods Eng. IJNMBH0029-598110.1002/nme.1620350307, 35, 521-539.
17. Elmustafa, A. A., and Stone, D. S. (2003). "Nanoindentation and the indentation size effect: Kinetics of deformation and strain gradient plasticity." J. Mech. Phys. Solids JMPSA80022-509610.1016/ S0022-5096(02)00033-9, 51, 357-381.
18. Fleck, N. A., and Hutchinson, J. W. (1997). "Strain gradient plasticity." Adv. Appl. Mech. AAMCAY0065-2156, 33, 295-361.
19. Gao, H., Huang, Y., Nix, W. D., and Hutchinson, J. W. (1999). "Mechanism-based strain gradient plasticity. I: Theory." J. Mech. Phys. Solids JMPSA80022-509610.1016/S0022-5096(98)00103-3, 47, 1239-1263.
20. Gracio, J. J. (1994). "The double effect of grain size on the work-hardening behavior of polycrystalline copper." Scr. Metall. Mater. SCRMEX0956-716X, 31, 487-489.
21. Guille, J., and Sieskind, M. (1991). "Microindentation studies on BaFCl single crystals." J. Mater. Sci. JMTSAS0022-2461, 26(4), 899-903.
22. Haque, M. A., and Saif, M. T. A. (2003). "A review on micro and nano-mechanical testing with MEMS." Exp. Mech. EXMCAZ0014-485110.1007/BF02410478, 43(3), 1-8.
23. Hay, J. L., and Pharr, G. M. (2000). "Instrumented indentation testing." ASM handbook, Mechanical testing and evaluation, Vol. 8, H. Kuhn and D. Medlin, eds., ASM, Materials Park, Ohio, 232-243.
24. Hendrix, B. C. (1995). "The use of shape correction factors for elastic indentation measurements." J. Mater. Res. JMREEE0884-2914, 110(2), 255-257.
25. Huang, Y., Xue, Z., Gao, H., and Xia, Z. C. (2000). "A study of micro-indentation hardness tests by mechanism-based strain gradient plasticity." J. Mater. Res. JMREEE0884-2914, 15, 1786-1796.
26. LeMonds, J., and Needleman, A. (1986). "Finite element analysis of shear localization in rate and temperature dependent solids." Mech. Mater. MSMSD30167-6636, 5, 339-361.
27. Lim, Y. Y., and Chaudhri, Y. Y. (1999). "The effect of the indenter load on the nanohardness of ductile metals: An experimental study of polycrystalline work-hardened and annealed oxygen-free copper." Philos. Mag. A PMAADG0141-861010.1080/014186199251193, 79(12), 2979-3000.
28. Ma, Q., and Clarke, D. R. (1995). "Size dependent hardness of silver single crystals." J. Mater. Res. JMREEE0884-291410.1557/ JMR.1995.0853, 10, 853-863.
29. Needleman, A. (1988). "Material rate dependent and mesh sensitivity in localization problems." Comput. Methods Appl. Mech. Eng.CMMECC0045-782510.1016/0045-7825(88)90069-2, 67, 68-85.
30. Nix, W. D., and Gao, H. (1998). "Indentation size effects in crystalline materials: A law for strain gradient plasticity." J. Mech. Phys. Solids JMPSA80022-509610.1016/S0022-5096(97)00086-0, 46(3), 411-425.
31. Oliver, W. C., and Pharr, G. M. (1992). "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments." J. Mater. Res. JMREEE0884-291410.1557/JMR.1992.1564, 7(6), 1564-1583.
32. Perzyna, P. (1966). "Fundamental problems visco-plasticity." Adv. Appl. Mech. AAMCAY0065-2156, 9, 243-377.
33. Pijaudier-Cabot, T. G. P., and Bazant, Z. P. (1987). "Nonlocal damage theory." J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(1987)113:10(1512), 113(10), 1512-1533.
34. Sneddon, I. N. (1965). "The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile." Int. J. Eng. Sci. IJESAN0020-722510.1016/ 0020-7225(95)00076-3, 3, 47-57.
35. Stelmashenko, N. A., Walls, M. G., Brown, L. M., and Milman, Y. V. (1993). "Microindentations on W and Mo oriented single crystals: An STM study." Acta Metall. Mater. AMATEB0956-715110.1016/ 0956-7151(93)90100-7, 41, 2855-2865.
36. Tickoo, R., Tandon, R. P., Bamzai, K. K., and Kotru, P. N. (2003). "Microindentation studies on samarium-modified lead titanate ceramics." Mater. Chem. Phys. MCHPDR0254-0584, 80(2), 446-451.
37. Vengatesan, B., Kanniah, H., and Ramasvamy, P. (1986). "Microhardness and crack patterns of CVT grown CdGa2S4 single crystals." J. Mater. Sci. Lett. JMSLD50261-8028, 5(10), 987-988.
38. Voyiadjis, G. Z., and Abed, F. H. (2005). "Microstructural based models for BCC and FCC metals with temperature and strain rate dependency." Mech. Mater. MSMSD30167-663610.1016/ j.mechmat.2004.02.003, 37(2-3), 355-378.
39. Voyiadjis, G. Z., and Abed, F. H. (2006). "A coupled temperature and strain rate dependent yield function for dynamic deformations of BCC metals." Int. J. Plast. IJPLER0749-6419, 22(8), 1398-1431.
40. Voyiadjis, G. Z., and Abu Al-Rub, R. K. (2002). "Length scales in gradient plasticity." Proc., IUTAM Symp. on Multiscale Modeling and Characterization of Elastic-Inelastic Behavior of Engineering Materials, S. Ahzi, M. Cherkaoui, M. A. Khaleel, H. M. Zbib, M. A. Zikry, and B. LaMatina, eds., Kluwer Academic, Dordrecht, The Netherlands, 167-174.
41. Voyiadjis, G. Z., and Abu Al-Rub, R. K. (2005). "Gradient plasticity theory with a variable length scale parameter." Int. J. Solids Struct. IJSOAD0020-7683, 42(14), 3998-4029.
42. Voyiadjis, G. Z., Abu Al-Rub, R. K., and Palazotto, A. N. (2003). "Non-local coupling of viscoplasticity and anisotropic viscodamage for impact problems using the gradient theory." Arch. Mech. AVMHBR0373-2029, 55(1), 39-89.
43. Voyiadjis, G. Z., Abu Al-Rub, R. K., and Palazotto, A. N. (2004). "Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient methods." Int. J. Plasticity, 20(6), 981-1038 (Special issue in recent advances in multiscale modeling of plasticity).
44. Voyiadjis, G. Z., and Almasri, A. H. (2008). "A physically based constitutive model for FCC metals with applications to dynamic hardness." Mech. Mater. MSMSD30167-663610.1016/j.mechmat.2007.11.008
45. Voyiadjis, G. Z., and Deliktas, B. (2000). "Multi-scale analysis of multiple damage mechanics coupled with inelastic behavior of composite materials." Mech. Res. Commun. MRCOD20093-641310.1016/ S0093-6413(00)00095-1, 27(3), 295-300.
46. Voyiadjis, G. Z., Deliktas, B., and Aifantis, E. C. (2001). "Multi-scale analysis of multiple damage mechanics coupled with inelastic behavior of composite materials." J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2001)127:7(636), 127(7), 636-645.
47. Voyiadjis, G. Z., and Dorgan, R. J. (2001). "Gradient formulation in coupled damage-plasticity." Arch. Mech. AVMHBR0373-2029, 53(4-5), 565-597.
48. Wang, W., Huang, Y., Hsia, K. J., Hu, K. X., and Chandra, A. (2003). "A study of microbend test by strain gradient plasticity." Int. J. Plast. IJPLER0749-6419, 19, 365-382.
49. Zbib, H. M., and Aifantis, E. C. (1992). "On the gradient-dependent theory of plasticity and shear bending." Acta Mech. AMHCAP0001-597010.1007/BF01174177, 92, 209-225.