Effect of strain rate, adiabatic heating and phase transformation phenomena on the mechanical behaviour of stainless steel

Strain

Volumn 46, Issue 3, 2010, Pages 283-297

  Andrade Campos, A ^a   Teixeira Dias, F ^a   Krupp, U ^b   Barlat, F ^c   Rauch, E F ^d   Gracio J J ^a  

^a UNIVERSITY OF AVEIRO   (Portugal)

^b UNIVERSITY OF SIEGEN   (Germany)

^c Pohang University of Science and Technology (POSTECH)   (South Korea)

^d UNIV GRENOBLE ALPES   (France)

Author keywords

Austenitic stainless steels; Formability; Martensitic phase transformation; Numerical model; Strain hardening; Strain rate

Indexed keywords

ADIABATIC HEATING; AISI 304; EFFECT OF STRAIN; HIGH STRAIN RATES; MARTENSITIC PHASE; MARTENSITIC PHASE TRANSFORMATIONS; MECHANICAL BEHAVIOUR; MICROSTRUCTURAL MEASUREMENTS; NUMERICAL MODEL; NUMERICAL MODELS; PHASE TRANSFORMATION; PLASTIC STRAIN; ROOM TEMPERATURE; STRESS STRAIN BEHAVIOURS; TEMPERATURE INCREASE; THERMAL ANALYSIS; UNIAXIAL TENSILE TEST; UNIFORM ELONGATION;

AUSTENITE; AUSTENITIC STAINLESS STEEL; AUSTENITIC TRANSFORMATIONS; MARTENSITE; MARTENSITIC STAINLESS STEEL; MARTENSITIC TRANSFORMATIONS; NUMERICAL METHODS; PLASTICITY; STRAIN HARDENING; TENSILE TESTING; THERMOANALYSIS;

STRAIN RATE;

EID: 77952474945     PISSN: 00392103     EISSN: 14751305     Source Type: Journal    
DOI: 10.1111/j.1475-1305.2008.00572.x     Document Type: Article

References (54)

1. Talonen, J., Nenonen, P., Pape, G. Hanninen, H. (2005) Effect of strain rate on the strain-induced γ→α′-martisite transformation and mechanical properties of austenitic stainless steels. Metall. Trans. A 36A, 421 432.
2. Alden, T. H. (1987) Theory of mobile dislocation density: application to the deformation of 304 stainless steel. Metall. Trans. 18A, 51 62.
3. Mecking, H. (1981) Strain hardening and dynamic recovery. In : Dislocation Modelling of Physical Systems (M. F. Ashby, R. Bullough, C. S. Hartley J. P. Hirth, Eds). Pergamon Press
4. Kocks, U. F. (1976) Laws for work-hardening and low temperature creep. ASME J. Eng. Mater. Technol. 98, 76 85.
5. Mecking, H. (1977) Description of hardening curves of FCC single and polycrystals. In : Work-Hardening in Tension and Fatigue (A. W. Thompson, Ed). TMS-AIME
6. Mangonon, P. J. Thomas, G. (1970) The martensite phases in 304 stainless steel. Metall. Trans. 1, 1577 1586.
7. Angel, T. (1954) Formation of martensite in austenitic stainless steels. J. Iron Steel Ins. 5, 165 174.
8. Krupp, U., West, C., Duan, H.-P. Christ, H.-J. (2002) Strain-induced martensite formation in metastable austenitic steels with varying carbon content. Z. Metallkd. 7, 706 711.
9. Krupp, U., Christ, H.-J., Lezuo, P., Maier, H. J. Teteruk, R. G. (2001) Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions. Mater. Sci. Eng. A. 319 321, 527 530.
10. Olsen, G. B. Cohen, M. (1975) Kinetics of strain-induced martensitic nucleation. Metall. Trans. A. 6A, 791 795.
11. Lichtenfeld, J. A., Mataya, M. C. Van Tyne, C. J. (2006) Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel. Metall. Trans. A. 37A, 147 161.
12. McReynolds, A. W. (1949) Effect of stress and deformation on the martensitic transformation. J. Appl. Phys. 20, 896 907.
13. Nohara, K., Ono, Y. Ohasi, N. (1977) Composition and grain size dependencies of strain induced martensite transformation in metastable austenitic stainless steels. J. Iron Steel Inst. Jpn. 63, 772 782.
14. Rosen, A., Jago, R. Kjer, T. (1972) Tensile properties of metastable stainless steels. J. Mater. Sci. 7, 870 876.
15. Talyan, V., Wagoner, R. H. Lee, J. K. (1998) Formability of stainless steel. Metall. Mater. Trans. A. 29A, 2161 2171.
16. Bressanelli, J. P. Moskowitz, A. (1966) Effects of strain rate, temperature and composition on tensile properties of metastable stainless steels. Trans. ASM 59, 223 239.
17. Iwamoto, T., Tsuta, T. Tomita, Y. (1998) Computational simulation on deformation behavior of ct specimens of TRIP steel under mode I loading for evaluation of fracture toughness. Int. J. Mech. Sci. 2-3, 173 182.
18. Okutani, T., Yukawa, N., Ishikawa, T. Jimma, T. (1995) The strain-induced martensitic transformation of SUS304 under various stress states. In : The Proceedings of the 1995 Japanese Spring Conference for the Technology of Plasticity, 18-20 May. The Japan Society for Technology of Plasticity Press
19. Lebedev, A. A. Kosarchuk, V. V. (2000) Influence of phase transformations on the mechanical properties of austenitic stainless steels. Int. J. Plast. 16, 749 767.
20. De, A. K., Murdock, D. C., Mataya, M. C., Speer, J. G. Matlock, D. K. (2004) Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction. Scripta Mater. 50, 1445 1449.
21. Nagy, E., Mertinger, V., Tranta, F. Solyom, J. (2004) Deformation induced martensitic transformation in stainless steels. Mater. Sci. Eng. A. 378, 308 313.
22. Diani, J. N. Parks, D. M. (1998) Effects of strain state on the kinetics of strain induced martensite in steels. J. Mech Phys. Solids. 46, 1613 1635.
23. Andrade-Campos, A., Teixeira-Dias, F. Grácio, J. (2005) Modelling the effect of strain rate on the thermomechanical behaviour of AISI 304 stainless steel. Materialwissenschaft und Werkstofftechnik 36, 566 571.
24. Olsen, G. B. Cohen, M. (1986) Mechanical properties and phase transformation in engineering materials. In : E.R.Parker Symposium on Structure/Property Relationships (S. D. Antolovich, R. O. Ritchie W. W. Gerberich, Eds). TMS-AIME
25. Stringfellow, R. G., Parks, D. M. Olson, G. B. (1992) A constitutive model for transformation plasticity accompanying strain-induced martensitic transformation in metastable austenitic steels. Acta Metall. Mater. 40, 1703 1716.
26. Iwamoto, T. Tsuta, T. (2000) Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels. Int. J. Plast. 16, 791 804.
27. Ludwigson, D. C. Berger, J. A. (1969) Plastic behaviour of metastable austenitic stainless steel. J. Iron Steel Ins. 63 69.
28. Bargui, H. Sidhom, H. (2000) Martensite induite : incidence sur le comportement en écrouissage et sur la limite de formage de l'acier inoxydable AISI 304. Mater. Tech. 11-12, 31 41.
29. Onyuna, M., Oettel, H., Martin, U. Wieb, A. (2004) On the deformation behaviour and martensitic transformations of metastable austenitic steels. Adv. Eng. Mater. 6, 529 535.
30. Iwamoto, T. Tsuta, T. (2002) Computational simulation on deformation behavior of ct specimens of TRIP steel under mode I loading for evaluation of fracture toughness. Int. J. Plast. 18, 1583 1606.
31. Gallée, S. 2005) Caractérisation Expérimentale et Simulation Numérique des Procédés d'Emboutissage Profond: Application aux Aciers Inoxydables Auste′nitiques. PhD Thesis, Université de Bretagne-Sud
32. Chaboche, J. L. (2008) A review of some plasticity and viscoplasticity constitutive theories. Int. J. Plast. 24, 1642 1693.
33. Maloy, S. A., Gray, G. T., III., Cady, C. M., Rutherford, R. W. Hixson, R. S. (2004) The influence of explosive-driven "taylor-wave" shock prestraining on the structure/property behavior of 304 stainless steel. Metall. Trans. A. 35, 2617 2624.
34. Campos, H. B., Gracio, J. J., Teixeira-Dias, F., Rocha, J. E. Duarte, J. F. (2001) Plastic behavior of 304 stainless steel deformed in uniaxial tension at different strain rates. In : Proceedings of IV Conferência Nacional de Conformação de Chapas. Universidade Federal do Rio Grande do Sul
35. Olson, G. B. Cohen, M. (1975) Kinetics of strain-induced martensitic nucleation. Metall. Trans. A. 6, 791 795.
36. Xing, H. L. Makinouchi, A. (2002) Three dimension finite element modeling of thermomechanical frictional contact between finite deformation bodies using R-minimum strategy. Comp. Methods Appl. Mech. Eng. 191, 4193 4214.
37. Rebelo, N. Kobayashi, S. (1980) A coupled analysis of viscoplastic deformation and heat transfer-I. Theoretical considerations. Int. J. Mech. Sci. 22, 699 718.
38. Bayerlein, M., Christ, H.-J. Mughrabi, H. (1989) Plasticity-induced martensitic transformation during cyclic deformation. Mater. Sci. Eng. A. 114, L11 L16.
39. Mughrabi, H. Christ, H.-J. (1997) Cyclic deformation and fatigue of selected ferritic and austenitic steels. ISIJ Int. 37, 1154 1169.
40. Zhang, M.-X., Kelly, P. M. Gates, J. D. (1999) A model of stress induced martensitic transformation in Fe-Ni-C alloy. Mat. Sci. Eng. A. 273-275, 251 256.
41. Andrade-Campos, A. 2005) Numerical Analysis and Modelling of the Mechanical and Thermal Behaviour of Aluminium Alloys. PhD Thesis, Universidade de Aveiro
42. Anand, L. (1985) Constitutive equations for hot-working of metals. Int. J. Plast. 1, 213 231.
43. Brown, S. B., Kwon, H. K. Anand, L. (1989) An internal variable constitutive model for hot working of metals. Int. J. Plast. 5, 95 130.
44. Miller, A. K. Sherby, O. D. (1978) A simplified phenomenological model for non-elastic deformation: prediction of pure aluminum behavior and incorporation of solute strengthening effects. Acta Metall. 26, 289 304.
45. Prinz, F. B. Argon, A. S. (1984) The evolution of plastic resistance in large strain plastic flow of single phase subgrain forming metals. Acta Metall. 32, 1021 1028.
46. Nix, W. D., Gibeling, J. C. Hughes, D. A. (1985) Time dependent deformation of metals. Metall. Trans. A. 16A, 2215 2226.
47. Brown, S. B. (1987) An Internal Variable Constitutive Model for the Hot Working of Metals. PhD Thesis, Massachusetts Institute of Technology
48. Andrade-Campos, A., Thuillier, S., Pilvin, P. Teixeira-Dias, F. (2004) On the estimation of material parameters for internal variable thermoelastic-viscoplastic constitutive models: gradient-based and GA optimization algoritms. In : Computational Mechanics, vol. 2 (Z. H. Yao, M. W. Yuan W. X. Zhong, Eds). WCCM VI, Tsinghua Univesrsity Press, Springer-Verlag
49. Argyris, J. H. St. Doltsinis, J. (1981) On the natural formulation and analysis of large deformation coupled thermomechanical problems. Comp. Methods Appl. Mech. Eng. 25, 195 253.
50. Sluzalec, A. (1988) Coupled thermoplasticity. Comm. Numer. Methods Eng. 4, 675 685.
51. Szabo, I. Varga, I. (1995) Modified calculation of the dissipation term in thermoplastic finite element equations. Comm. Numer. Methods Eng. 11, 69 72.
52. Simo, J. C. Miehe, C. (1992) Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation. Comp. Meth. Appl. Mech. Eng. 98, 41 104.
53. Andrade-Campos, A., Thuillier, S., Pilvin, P. Teixeira-Dias, F. (2007) On the determination of material parameters for internal variable thermoelastic-viscoplastic constitutive models. Int. J. Plast. 23, 1349 1379.
54. Verner, J. H. 1994) A classification scheme for studying explicit Runge-kutta pairs. In : Scientific Computing (S. O. Fantula, Ed.). Ada and Jane Press