The influence of explosive-driven "Taylor-Wave" Shock prestraining on the structure/property behavior of 304 stainless steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 9, 2004, Pages 2617-2624

  Maloy, S A ^a   Gray III, G T ^a   Cady, C M ^a   Rutherford, R W ^a   Hixson, R S ^a  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION TESTING; DEFORMATION; DUCTILITY; MARTENSITE; METALLOGRAPHIC MICROSTRUCTURE; STEEL METALLOGRAPHY; STRAIN RATE; TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY; YIELD STRESS;

COMPRESSIVE TESTING; MICROSTRUCTURAL ANALYSIS; OPTICAL METALLOGRAPHY; PLASTIC STRAIN; TAYLOR WAVE SHOCK PRESTRAINING;

STAINLESS STEEL;

EID: 6944219998     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-0207-4     Document Type: Article

References (43)

1. L.E. Murr: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 607-73.
2. G.T. Gray III: in High-Pressure Shock Compression of Solids, J.R. Asay and M. Shahinpoor, eds., Springer-Verlag, New York, NY, 1993, pp. 187-216.
3. G.T. Gray III: in ASM Handbook, vol. 8, Mechanical Testing and Evaluation, H. Kuhn and D. Medlin, eds., ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 530-38.
4. M.C. Inman, L.E. Murr, and M.F. Rose: Advances in Electron Metallography ASTM, Philadelphia, PA, 1966, pp. 39-48.
5. K.P. Staudhammer: J. Phys. IV France Coll. C3 (DYMAT 91), 1991, vol. 1, pp. 93-100.
6. L.E. Murr and F.I. Grace: Trans. TMS-AIME, 1969, vol. 245, pp. 2225-35.
7. L.E. Murr, J.V. Foltz, and F.D. Altman: Phil. Mag., 1971, vol. 23, pp. 1011-28.
8. M.A. Meyers: Mater. Sci. Eng., 1981, vol. 51, pp. 261-63.
9. K.P. Staudhammer and L.E. Murr: Mater. Sci. Eng., 1980, vol. 44, pp. 97-113.
10. L.E. Murr and K.P. Staudhammer: Mater. Sci. Eng., 1975, vol. 20, pp. 35-46.
11. M. Gerland and M. Hallouin: J. Mater. Sci., 1994, vol. 29, pp. 345-51.
12. K.A. Johnson, L.E. Murr, and K.P. Staudhammer: Acta Metall., 1985, vol. 33, pp. 677-84.
13. E. Moin and L.E. Murr: Mater. Sci. Eng., 1979, vol. 37, pp. 249-69.
14. M. Kangilaski, J.S. Perrin, R.A. Wullaert, and A.A. Bauer: Metall. Trans., 1971, vol. 2, pp. 2607-12.
15. H.-J. Kestenbach and M.A. Meyers: Metall. Trans. A, 1976, vol. 7A, pp. 1943-50.
16. L.E. Murr, E. Moin, F. Gruelich, and K.P. Staudhammer: Scripta Mater., 1978, vol. 12, pp. 1031-35.
17. W.C. Leslie: in Metallurgical Effects at High Strain Rates, R.W. Rohde, B.M. Butcher, J.R. Holland, and C.H. Karnes, eds., Plenum Press, New York, NY, 1973, pp. 571-85.
18. A.S. Appleton and J.S. Waddington: Acta Metall., 1964, vol. 12, pp. 956-57.
19. K. Wongwiwat and L.W. Murr: Mater. Sci. Eng., 1978, vol. 35, pp. 273-85.
20. A.R. Champion and R.W. Rohde: J. Appl. Phys., 1970, vol. 41, pp. 2213-23.
21. L.E. Murr: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 753-77.
22. R.L. Nolder and G. Thomas: Acta Mater., 1964, vol. 12, pp. 227-40.
23. F.I. Grace, M.C. Inman, and L.E. Murr: Br. J. Appl. Phys. (Ser. 2 , 1968, vol. 1, pp. 1437-43.
24. V.I. Zeldovich, A.I. Uvarov, N.Y. Frolova, O.S. Rinkevich, N.A. Tereshchenko, and N.P. Purygin: Phys. Met. Metallogr., 1998, vol. 86, pp. 575-84.
25. L.E. Murr and J.A. Korbonski: Metall. Trans., 1970, vol. 1, pp. 3333-40.
26. C.R. Hills and H.J. Rack: Mater. Sci. Eng., 1981, vol. 51, pp. 231-39.
27. J.F. Watson and J.L. Christian: ASTM STP 287, ASTM, Philadelphia, PA, 1960, pp. 170-95.
28. K.M. Carlsen and K.C. Thomas: Trans. ASM, 1962, vol. 55, pp. 462-73.
29. V.N. Krivobok and A.M. Talbot: ASTM Proc., ASTM, Philadelphia, PA, 1950, pp. 895-930.
30. P.L.J. Mangonon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577-86.
31. P.L.J. Mangonon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1587-94.
32. G.W. Powell, E.R. Marshall, and W.A. Backofen: Trans. ASM, 1958, vol. 50, pp. 478-97.
33. J.P. Bressanelli and A. Moskowitz: Trans. ASM, 1966, vol. 59, pp. 223-39.
34. K.P. Staudhammer, L.E. Murr, and S.S. Hecker: Acta Metall., 1983, vol. 31, pp. 267-74.
35. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619-26.
36. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627-35.
37. G.W. Form and W.M. Baldwin: Trans. ASM, 1956, vol. 48, pp. 474-85.
38. D.V. Neff, T.E. Mitchell, and A.R. Troiano: Trans. ASM, 1969, vol. 62, pp. 858-68.
39. T. Angel: J. Iron Steel Inst., 1954, pp. 165-74.
40. J.N. Johnson, G.T. Gray III, and N.K. Bourne: J. Appl. Phys., 1999, vol. 86, pp. 4892-901.
41. J.N. Fritz: MACRAME Hydrodynamics Computer Code, Los Alamos National Laboratory, Los Alamos, NM, to be published.
42. G.T. Gray, III: in ASM Handbook, vol. 8: Mechanical Testing and Evaluation, H. Kuhn and D. Medlin, eds., ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 462-76.
43. K.P. Staudhammer, C.E. Frantz, and S.S. Hecker: in Shock Waves and High Strain-Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, ed., Plenum, New York, NY, 1981, pp. 91-112.