SCOPUS 정보 검색 플랫폼

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 41, Issue 5, 2010, Pages 1261-1268

Predicting fracture toughness of TRIP 800 using phase properties characterized by in-situ high-energy X-ray diffraction

(7) Soulami, A a Choi, K S a Liu, W N a Sun, X a Khaleel, M A a Ren, Y b Wang, Y D c

a PACIFIC NORTHWEST NATIONAL LABORATORY (United States)

b ARGONNE NATIONAL LABORATORY (United States)

c NORTHEASTERN UNIVERSITY (China)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK PROPAGATION BEHAVIOR; FRACTURE RESISTANCE; HIGH ENERGY X-RAY DIFFRACTION; HIGH STRENGTH; HIGH-STRENGTH STEELS; IN-SITU; MEASURED RESULTS; MICROMECHANICS-BASED MODELING; MODELING PARAMETERS; MODELING RESULTS; MULTIPHASE MATERIALS; MULTIPHASE MICROSTRUCTURE; PHASE PROPERTIES; R-CURVES; RESISTANCE CURVES; SHEET SPECIMEN; TRANSFORMATION-INDUCED PLASTICITY; TRIP-STEEL; UNIAXIAL TENSILE TEST;

CRACK PROPAGATION; CRACKS; FINITE ELEMENT METHOD; FRACTURE; HIGH ENERGY PHYSICS; HIGH STRENGTH STEEL; MICROSTRUCTURE; TENSILE TESTING; X RAY DIFFRACTION;

FRACTURE TOUGHNESS;

EID: 77952430882 PISSN: 10735623 EISSN: None Source Type: Journal
DOI: 10.1007/s11661-010-0208-4 Document Type: Conference Paper

Times cited : (8)

References (25)

1
- 0033684256
- 1064.74637 10.1016/S0749-6419(00)00008-5 1:CAS:528:DC%2BD3cXmtVCntLk%3D
- M. Cherkaoui M. Berveiller X. Lemoine 2000 Int. J. Plast. 16 1215 41 1064.74637 10.1016/S0749-6419(00)00008-5 1:CAS:528:DC%2BD3cXmtVCntLk%3D
- (2000) Int. J. Plast. , vol.16 , pp. 1215-41
- Cherkaoui, M.¹ Berveiller, M.² Lemoine, X.³

2
- 4544372676
- 10.1016/j.actamat.2004.07.031 1:CAS:528:DC%2BD2cXnt1Gqsrw%3D
- H.N. Han C.G. Lee C.S. Oh T.H. Lee S.J. Kim 2004 Acta Mater. 52 5203 14 10.1016/j.actamat.2004.07.031 1:CAS:528:DC%2BD2cXnt1Gqsrw%3D
- (2004) Acta Mater. , vol.52 , pp. 5203-14
- Han, H.N.¹ Lee, C.G.² Oh, C.S.³ Lee, T.H.⁴ Kim, S.J.⁵

3
- 0033740503
- 0947.74559 10.1016/S0749-6419(99)00079-0 1:CAS:528:DC%2BD3cXktlKhtLo%3D
- T. Iwamoto T. Tsuta 2000 Int. J. Plast. 16 791 804 0947.74559 10.1016/S0749-6419(99)00079-0 1:CAS:528:DC%2BD3cXktlKhtLo%3D
- (2000) Int. J. Plast. , vol.16 , pp. 791-804
- Iwamoto, T.¹ Tsuta, T.²

4
- 77952429744
- G.B. Olson M. Cohen 1995 Metall. Trans. A 26A 791 95
- (1995) Metall. Trans. A , vol.26 , pp. 791-95
- Olson, G.B.¹ Cohen, M.²

5
- 0026898616
- 10.1016/0956-7151(92)90114-T 1:CAS:528:DyaK38XksFeit74%3D
- R.G. Stringfellow D.M. Parks G.B. Olson 1992 Acta Metall. Mater. 40 1703 16 10.1016/0956-7151(92)90114-T 1:CAS:528:DyaK38XksFeit74%3D
- (1992) Acta Metall. Mater. , vol.40 , pp. 1703-16
- Stringfellow, R.G.¹ Parks, D.M.² Olson, G.B.³

6
- 0032316708
- 0969.74048 10.1016/S0749-6419(99)80000-X 1:CAS:528:DyaK1cXmtVyjs70%3D
- M. Cherkaoui M. Berveiller H. Sabar 1998 Int. J. Plast. 14 597 626 0969.74048 10.1016/S0749-6419(99)80000-X 1:CAS:528:DyaK1cXmtVyjs70%3D
- (1998) Int. J. Plast. , vol.14 , pp. 597-626
- Cherkaoui, M.¹ Berveiller, M.² Sabar, H.³

7
- 57849132704
- 10.1080/14786430802043646 1:CAS:528:DC%2BD1cXhsFSmsbfN 2008PMag.88.3479C
- M. Cherkaoui A. Soulami A. Zeghloul M.A. Khaleel 2008 Philos. Mag. 88 3479 3512 10.1080/14786430802043646 1:CAS:528:DC%2BD1cXhsFSmsbfN 2008PMag..88.3479C
- (2008) Philos. Mag. , vol.88 , pp. 3479-3512
- Cherkaoui, M.¹ Soulami, A.² Zeghloul, A.³ Khaleel, M.A.⁴

8
- 63749117847
- 10.1016/j.actamat.2009.02.020 1:CAS:528:DC%2BD1MXktlGhu7g%3D
- K.S. Choi W.N. Liu X. Sun M.A. Khaleel 2009 Acta Mater. 57 2592 2604 10.1016/j.actamat.2009.02.020 1:CAS:528:DC%2BD1MXktlGhu7g%3D
- (2009) Acta Mater. , vol.57 , pp. 2592-2604
- Choi, K.S.¹ Liu, W.N.² Sun, X.³ Khaleel, M.A.⁴

9
- 0012480996
- 0899.73462 10.1016/0020-7225(95)00045-Y 1:CAS:528:DyaK2MXovVamsro%3D
- J.M. Diani H. Sabar M. Berveiller 1995 Int. J. Eng. Sci. 33 1921 34 0899.73462 10.1016/0020-7225(95)00045-Y 1:CAS:528:DyaK2MXovVamsro%3D
- (1995) Int. J. Eng. Sci. , vol.33 , pp. 1921-34
- Diani, J.M.¹ Sabar, H.² Berveiller, M.³

10
- 0024916685
- Mathematical modelling of transformation plasticity in steels: I. Case of ideal-plastic phases
- DOI 10.1016/0749-6419(89)90001-6
- J.B. Leblond J. Devaux J.C. Devaux 1989 Int. J. Plast. 5 551 72 10.1016/0749-6419(89)90001-6 1:CAS:528:DyaK3cXht1aqu70%3D (Pubitemid 20635083)
- (1989) International journal of plasticity , vol.5 , Issue.6 , pp. 551-572
- Leblond, J.B.¹ Devaux, J.² Devaux, J.C.³

11
- 56349160122
- 10.1007/s11661-008-9649-4 1:CAS:528:DC%2BD1cXhtlGjtbrE 2008MMTA.39.3089C
- K.S. Choi W.N. Liu X. Sun M.A. Khaleel Y. Ren Y.D. Wang 2008 Metall. Mater. Trans. A 39A 3089 96 10.1007/s11661-008-9649-4 1:CAS:528: DC%2BD1cXhtlGjtbrE 2008MMTA..39.3089C
- (2008) Metall. Mater. Trans. A , vol.39 , pp. 3089-96
- Choi, K.S.¹ Liu, W.N.² Sun, X.³ Khaleel, M.A.⁴ Ren, Y.⁵ Wang, Y.D.⁶

12
- 34548746883
- Fracture resistance of nanocrystalline Ni
- DOI 10.1007/s11661-007-9180-z
- D. Farkas 2007 Metall. Mater. Trans. A 38A 2168 73 10.1007/s11661-007- 9180-z 1:CAS:528:DC%2BD2sXhtFemur3F 2007MMTA..38.2168F (Pubitemid 47423113)
- (2007) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , vol.A , Issue.13 , pp. 2168-2173
- Farkas, D.¹

13
- 67649108933
- 10.1016/j.actamat.2009.05.002 1:CAS:528:DC%2BD1MXnslKntLk%3D
- N. Jia Z.H. Cong X. Sun S. Cheng Z.H. Nie Y. Ren P.K. Liaw Y.D. Wang 2009 Acta Mater. 57 3965 77 10.1016/j.actamat.2009.05.002 1:CAS:528: DC%2BD1MXnslKntLk%3D
- (2009) Acta Mater. , vol.57 , pp. 3965-77
- Jia, N.¹ Cong, Z.H.² Sun, X.³ Cheng, S.⁴ Nie, Z.H.⁵ Ren, Y.⁶ Liaw, P.K.⁷ Wang, Y.D.⁸

14
- 63749090661
- Pacific Northwest National Laboratory, Richland, WA
- Y.D. Wang and Y. Ren: Technical Report No. PNNL-18354, Pacific Northwest National Laboratory, Richland, WA, 2007.
- (2007) Technical Report No. PNNL-18354
- Wang, Y.D.¹ Ren, Y.²

15
- 0242523120
- 10.1016/j.actamat.2003.07.002 1:CAS:528:DC%2BD3sXptFGltbY%3D
- B. Clausen T. Leffers T. Lorentzen 2003 Acta Mater. 51 6181 88 10.1016/j.actamat.2003.07.002 1:CAS:528:DC%2BD3sXptFGltbY%3D
- (2003) Acta Mater. , vol.51 , pp. 6181-88
- Clausen, B.¹ Leffers, T.² Lorentzen, T.³

16
- 63749125910
- 10.1007/s11661-009-9792-6 1:CAS:528:DC%2BD1MXit1Ontbw%3D 2009MMTA.40.796C
- K.S. Choi W.N. Liu X. Sun M.A. Khaleel 2009 Metall. Mater. Trans. A 40A 796 809 10.1007/s11661-009-9792-6 1:CAS:528:DC%2BD1MXit1Ontbw%3D 2009MMTA..40.796C
- (2009) Metall. Mater. Trans. A , vol.40 , pp. 796-809
- Choi, K.S.¹ Liu, W.N.² Sun, X.³ Khaleel, M.A.⁴

17
- 69449106128
- 10.1016/j.ijplas.2008.12.012 1:CAS:528:DC%2BD1MXhtFSnsbjO
- X. Sun K.S. Choi W.N. Liu M.A. Khaleel 2009 Int. J. Plast. 25 1888 1909 10.1016/j.ijplas.2008.12.012 1:CAS:528:DC%2BD1MXhtFSnsbjO
- (2009) Int. J. Plast. , vol.25 , pp. 1888-1909
- Sun, X.¹ Choi, K.S.² Liu, W.N.³ Khaleel, M.A.⁴

18
- 70349264460
- 10.1016/j.msea.2009.08.010
- X. Sun K.S. Choi A. Soulami W.N. Liu M.A. Khaleel 2009 Mater. Sci. Eng. A 526 140 49 10.1016/j.msea.2009.08.010
- (2009) Mater. Sci. Eng. A , vol.526 , pp. 140-49
- Sun, X.¹ Choi, K.S.² Soulami, A.³ Liu, W.N.⁴ Khaleel, M.A.⁵

19
- 38649138767
- 1159.74331 10.1016/j.ijsolstr.2007.10.026
- L. Delannay P. Jacques T. Pardoen 2008 Int. J. Solids Struct. 45 1825 43 1159.74331 10.1016/j.ijsolstr.2007.10.026
- (2008) Int. J. Solids Struct. , vol.45 , pp. 1825-43
- Delannay, L.¹ Jacques, P.² Pardoen, T.³

20
- 33745506323
- Technical Research Laboratories, Pohang, Korea
- H. Ding, L.X. Du, and Z.D. Wang: Proc. Workshop on HIPERS-21, Technical Research Laboratories, Pohang, Korea, 2002, pp. 65-74.
- (2002) Proc. Workshop on HIPERS-21 , pp. 65-74
- Ding, H.¹ Du, L.X.² Wang, Z.D.³

21
- 0034465459
- Micromechanics modeling of composite with ductile matrix and shape memory alloy reinforcement
- DOI 10.1016/S0020-7683(98)00332-1
- M. Cherkaoui Q. Sun 2000 Int. J. Solids Struct. 37 1577 94 0991.74008 10.1016/S0020-7683(98)00332-1 (Pubitemid 32213094)
- (2000) International Journal of Solids and Structures , vol.37 , Issue.11 , pp. 1577-1594
- Cherkaoui, M.¹ Sun, Q.P.² Song, G.Q.³

22
- 0242416821
- ABAQUS. Dassault Systemes Simulia Corp. Providence, RI
- ABAQUS: Analysis User's Manual, Ver. 6.8, Dassault Systemes Simulia Corp., Providence, RI, 2008.
- (2008) Analysis User's Manual, Ver. 6.8

23
- 77952429680
- ASTM International, Philadelphia, PA
- ASTM E561, ASTM International, Philadelphia, PA, 2007.
- (2007) ASTM E561

24
- 0028602540
- 10.2355/isijinternational.34.443 1:CAS:528:DyaK2cXktl2ru7c%3D
- M. Cortie 1994 ISIJ Int. 34 443 50 10.2355/isijinternational.34.443 1:CAS:528:DyaK2cXktl2ru7c%3D
- (1994) ISIJ Int. , vol.34 , pp. 443-50
- Cortie, M.¹

25
- 77952430196
- O. Kolednik 1992 Steel Res. 63 315 17
- (1992) Steel Res. , vol.63 , pp. 315-17
- Kolednik, O.¹

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.