Influence of martensite mechanical properties on failure mode and ductility of dual-phase steels

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 40, Issue 4, 2009, Pages 796-809

  Choi, K S ^a   Liu, W N ^a   Sun, X ^a   Khaleel, M A ^a  

^a PACIFIC NORTHWEST NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL RESULTS; DEFORMATION PROCESS; DP-STEEL; DUAL-PHASE STEEL; DUCTILE FAILURES; FAILURE STRAIN; FINITE ELEMENT CALCULATIONS; MARTENSITE PHASE; PLASTIC STRAIN LOCALIZATION; REPRESENTATIVE VOLUME ELEMENTS; ULTIMATE TENSILE STRENGTH;

DUCTILITY; FAILURE MODES; FINITE ELEMENT METHOD; MARTENSITE; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; TITRATION;

MARTENSITIC STEEL;

EID: 63749125910     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-009-9792-6     Document Type: Article

References (47)

1. P. Shanmugam and K.R. Karthikeyan: Proc. Int. Conf. on Advanced High Strength Sheet Steels for Automotive Applications, Winter Park, CO, Association for Iron & Steel Technology, Warrendale, PA, 2004, pp. 171-78.
2. M.S. Rashid: SAE Technical Paper 760206, Society of Automotive Engineers, Warrendale, PA, 1976.
3. M.S. Rashid and E.R. Cprek: in ASTM Special Technical Publication, B.A. Niemeier, A.K. Schmieder, and J.R. Newby, eds., ASTM, Philadelphia, PA, 1978, vol. 647, pp. 174-90.
4. N.J. Kim and A.H. Nakagawa: Mater. Sci. Eng., 1986, vol. 83, pp. 145-49.
5. M. Erdogan: J. Mater. Sci., 2002, vol. 37, pp. 3623-30.
6. M. Erdogan and R. Priestner: Mater. Sci. Technol., 2002, vol. 18, pp. 369-76.
7. S. Sun and M. Pugh: Mater. Sci. Eng., A, 2002, vol. 335, pp. 298- 308.
8. K.S. Park, K.-T. Park, D.L. Lee, and C.S. Lee: Mater. Sci. Eng., A, 2007, vols. 449-451, pp. 1135-38.
9. M. Tayanc, A. Aytac, and A. Bayram: Mater. Des., 2007, vol. 28, pp. 1827-35.
10. M. Sarwar, E. Ahmad, K.A. Qureshi, and T. Manzoor: Mater. Des., 2007, vol. 28, pp. 335-40.
11. M. Okayasu, K. Sato, M. Mizuno, D.Y. Hwang, and D.H. Shin: Int. J. Fatigue, 2008, vol. 30, pp. 1358-65.
12. C. Kim: Metall. Trans. A, 1988, vol. 19A, pp. 1263-68.
13. S. Gündüz and A. Tosun: Mater. Des., 2008, vol. 29, pp. 1914-18.
14. H. Huh, S.-B. Kim, J.-H. Song, and J.-H. Lim: Int. J. Mech. Sci., 2008, vol. 50, pp. 918-31.
15. J. Qu, W. Dabboussi, F. Hassani, J. Nemes, and S. Yue: Mater. Sci. Eng., A, 2008, vol. 479, pp. 93-104.
16. W.C. Leslie and R.J. Sober: Trans. ASM, 1967, vol. 60, pp. 459- 84.
17. G.R. Speich and R.L. Miller: in Structure and Properties of Dual- Phase Steels, R.A. Kot and J.W. Morris, eds., TMS-AIME, New York, NY, 1979, pp. 145-82.
18. M.J. Roberts and W.S. Owen: Special Report No. 93, The Iron and Steel Institute, London, 1965, pp. 171-78.
19. J.M. Chilton and P.M. Kelly: Acta Metall., 1968, vol. 16, pp. 637- 56.
20. P.G. Winchell and M. Cohen: Trans ASM, 1962, vol. 55, pp. 347- 61.
21. G.R. Speich and H. Warlimont: J. Iron Steel Inst., 1968, vol. 20, pp. 385-92.
22. H.K.D.H. Bhadeshia and D.V. Edmonds: Met. Sci., 1980, vol. 14, pp. 41-49.
23. F.M. Beremin: Metall. Trans. A, 1981, vol. 12A, pp. 723-31.
24. A.M. Sarosiek and W.S. Owen: Scripta Metall., 1983, vol. 17, pp. 227-31.
25. A.M. Sarosiek and W.S. Owen: Mater. Sci. Eng., 1984, vol. 66, pp. 13-34.
26. J.G. Cowie, M. Azrin, and G.B. Olson: Metall. Trans. A, 1989, vol. 20A, pp. 143-53.
27. F. Marketz and F.D. Fischer: Comput. Mater. Sci., 1994, vol. 3, pp. 307-25.
28. B. Verhaeghe, F. Louchet, Y. Bréchet, and J.P. Massoud: Acta Mater., 1997, vol. 45, pp. 1811-19.
29. H. Sabar, M. Berveiller, V. Favier, and S. Berbenni: Int. J. Solids Struct., 2002, vol. 39, pp. 3257-76.
30. S. Berbenni, V. Favier, X. Lemoine, and M. Berveiller: Mater. Sci. Eng., A, 2004, vol. 372, pp. 128-36.
31. D.D. Tjahjanto, S. Turteltaub, A.S. Suiker, and S. van der Zwaag: Modell. Simul. Mater. Sci. Eng., 2006, vol. 14, pp. 617-36.
32. C. McVeigh, F. Vernerey, W.K. Liu, B. Moran, and G. Olson: J. Mech. Phys. Solids, 2007, vol. 55, pp. 225-44.
33. M. Delincé , Y. Bréchet, J.D. Embury, M.G.D. Geers, P.J. Jacques, and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 2337-50.
34. M. Grujicic, T. Erturk, and W.S. Owen: Mater. Sci. Eng., 1986, vol. 82, pp. 151-59.
35. F.M. Al-Abbasi and J.A. Nemes: Int. J. Mech. Sci., 2003, vol. 45, pp. 1449-65.
36. F.M. Al-Abbasi and J.A. Nemes: Comput. Mater. Sci., 2007, vol. 39, pp. 402-15.
37. D.E. Ilie, B.P. O'Donnell, J.P. McGarry, and P.E. McHugh: J. Strain Anal. Eng. Des., 2007, vol. 42, pp. 237-52.
38. V. Uthaisangsuk, U. Prahl, and W. Bleck: Comput. Mater. Sci., 2008, vol. 43, pp. 27-35.
39. S. Balasivanandha Prabu and L. Karunamoorthy: J. Mater. Process. Technol., 2008, vol. 207, pp. 53-62.
40. F.A. McClintock: J. Appl. Mech., 1968, vol. 35, pp. 363-71.
41. Y. Wei and G. Xu: Int. J. Plasticity, 2005, vol. 21, pp. 2123-49.
42. N. Bonora, A. Ruggiero, L. Esposito, and D. Gentile: Int. J. Plasticity, 2006, vol. 22, pp. 2015-47.
43. P.J. Sánchez, A.E. Huespe, and J. Oliver: Int. J. Plasticity, 2008, vol. 24, pp. 1008-38.
44. Y. Li and D. Karr: Int. J. Plasticity, 2008, DOI 10.1016/ j.ijplas.2008.07.001.
45. X. Sun, K.S. Choi, W.N. Liu, and M.A. Khaleel: Int. J. Plasticity, 2008, DOI 10.1016/j.ijplas.2008.12.012.
46. ABAQUS: Analysis User's Manual, Version 6.7, Dassault Systèmes, Providence, RI, 2007.
47. M. Tumuluru: Weld. J., 2007, vol. 86, pp. 161-69.