Molecular dynamics simulation of nanometric machining under realistic cutting conditions

Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008

Volumn 2, Issue , 2009, Pages 235-244

  Promyoo, R ^a   El Mounayri, H ^a   Yang, X ^a  

^a Indiana University Purdue University Indianapolis   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHIP FORMATIONS; CONVENTIONAL CUTTING; CUTTING CONDITIONS; CUTTING FORCES; DEPTH OF CUT; MOLECULAR DYNAMICS SIMULATIONS; NANOMETRIC MACHINING; RAKE ANGLE; THRUST FORCES; TOOL RAKE ANGLE;

DYNAMICS; MACHINING; MOLECULAR DYNAMICS;

CRYSTAL CUTTING;

EID: 77951607773     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/MSEC_ICMP2008-72533     Document Type: Conference Paper

References (42)

1. Tay, A. O., Stevenson, M. G., and de Vahl Davis, G., 1974, "Using the finite element method to determine temperature distributions in orthogonal machining," Proceedings Institution of Mechanical Engineers, Vol.188, pp. 627-638.
2. Strenkowski, J. S. and Carroll, J. T., 1985, "A Finite element model of orthogonal metal cutting," Journal of Engineering for Industry (Trans. ASME), Vol.107, pp. 349-354.
3. Carroll, J., and Strenkowski, J. S., 1988, "Finite element models of orthogonal cutting with application to single point diamond turning," International Journal of Mechanical Sciences, Vol.30, pp. 899-920
4. Strenkowski, J. S., and Moon, K. J., 1990, "Finite element prediction of chip geometry and tool/workpiece temperature distributions in orthogonal cutting," Journal of Engineering for Industry (Trans. ASME), Vol.112, pp. 313-318.
5. Zhang, B., and Bagchi, A., 1994, "Finite element simulation of chip formation and comparison with machining experiment," Journal of Engineering for Industry (Trans. ASME), Vol.116, pp. 289-297.
6. Yen Y.C., Jain, A., and Altan, T., 2004, "A finite element analysis of orthogonal machining using different tool edge geometries," Journal of Materials Processing Technology, Vol.146, pp. 72-81.
7. Alder, B. J., and Wainwright, T. E., 1959, "Studies in molecular dynamics. I. General method," Journal of Chemical Physics, Vol.31, pp. 459-466.
8. Alder, B. J., and Wainwright, T. E., 1960, "Studies in molecular dynamics. II. Behavior of a small number of elastic spheres," Journal of Chemical Physics, Vol.33, pp. 1439-1451.
9. Komanduri, R., and Raff, L. M., 2001, "A review on the molecular dynamics simulation of machining at the atomic scale," Proceedings Institution of Mechanical Engineers, Vol.215, Part B, pp. 1639-1672.
10. Belak, J., and Stowers, I. F., 1990, "A molecular dynamics model of the orthogonal cutting process," In Proceedings of the ASPE Annual Conference, Rochester, New York, p. 76.
11. Stowers, I. F., Belak, J., Lucca, D. A., Komanduri, R., Rhorer, R. L., Moriwaki, T., Okuda, K., Ikawa, N., Shimada, S., Tanaka, H., Dow, T. A., and Drescher, J. D., 1991, "Molecular dynamics simulation of the chip forming process in single crystal copper and comparison with experimental data," In Proceedings of the ASPE Annual Conference, pp. 100-103.
12. Shimada, S., Ikawa, N., Tanaka, H. and Uchikoshi, J., 1994, "Structure of micromachined surface simulated by molecular dynamics analysis," CIRP Annals, Vol.43, pp. 51-54.
13. Shimada, S., Ikawa, N., Ohmori, G., Tanaka, H., and Uchikoshi, U., 1992, "Molecular dynamics analysis as compared with experimental results of micromachining," CIRP Annals, Vol.41, pp. 117-120.
14. Shimada, S., Ikawa, N., Tanaka, H., Ohmori, G., Uchikoshi, J., and Yoshinaga, H., 1993, "Feasibility study on ultimate accuracy in microcutting using molecular dynamics simulation," CIRP Annals, Vol.42, pp. 91-94.
15. Inamura, T., Suzuki, H., and Takezawa, N., 1991, "Cutting experiments in a computer using atomic models of a copper crystal and a diamond tool," International Journal of the Japan Society for Precision Engineering, Vol.25, pp. 259-266.
16. Inamura, T., Takezawa, N., and Taniguchi, N., 1992, "Atomicscale cutting in a computer using crystal models of copper and diamond," CIRP Annals, Vol.41, pp. 121-124.
17. Inamura, T., Takezawa, N., and Kumaki, Y., 1993, "Mechanics and energy dissipation in nanoscale cutting," CIRP Annals, Vol.42, pp. 79-82.
18. Lin, Z. C., and Huang, J. C., 2004, "A nano-orthogonal cutting model based on a modified molecular dynamics technique," Nanotechnology, Vol.15, pp. 510-519.
19. Zhang, L., and Tanaka, H., 1997, "Towards a deeper understanding of wear and friction on the atomic scale - A molecular dynamics analysis," Wear, Vol.211, pp. 44-53.
20. Komanduri, R., Chandrasekaran, N., and Raff, L. M., 2000, "Molecular dynamics simulation of atomic-scale friction," Physical Review B, Vol.61, pp. 14007-14019.
21. Komanduri, R., Chandrasekaran, N., and Raff, L. M., 2000, "MD Simulation of nanometric cutting of single crystal aluminum-effect of crystal orientation and direction of cutting," Wear, Vol.242, pp. 60-88.
22. Komanduri, R., Chandrasekaran, N., and Raff, L. M., 2001, "MD simulation of exit failure in nanometric cutting," Materials Science and Engineering: A, Vol.311, pp. 1-12.
23. Komanduri, R., Chandrasekaran, N., and Raff, L. M., 1999, "Some aspects of machining with negative-rake tools simulating grinding: a molecular dynamics simulation approach," Philosophical Magazine B, Vol.79, pp. 955-968.
24. Belak, J., Boercker, D. B., and Stower, I. F., 1993, "Simulation of nanometer scale deformation of metallic and ceramic surfaces," MRS Bulletin, Vol.18, pp. 55-60.
25. Ye, Y. Y., Biswas, R., Morris, J. R., Bastawros, A., and Chandra, A., 2003, "Molecular dynamics simulation of nanoscale machining of copper," Nanotechnology, Vol.14, pp. 390-396.
26. Komanduri, R., Chandrasekaran, N., and Raff, L. M., 2001, "Molecular dynamics simulation of the nanometric cutting of silicon," Philosophical Magazine B, Vol.81, pp. 1989-2019. (Pubitemid 35435991)
27. Kang, R. K., Guo, X. G., Guo, D. M., and Jin, Z. J., 2004, "A study of the molecular dynamics simulation in nanometric grinding," Key Engineering Materials, Vol.257-258, pp. 33-38.
28. Rentsch, R., and Inasaki, I., 2006, "Molecular dynamics simulation of the nanometer scale cutting process," International Journal of Manufacturing Research, Vol.1, pp. 83-100.
29. Shimizu, J., Zhou, L., and Eda, H., 2006, "Molecular dynamics simulation of vibration-assisted cutting: influences of vibration, acceleration and velocity," International Journal of Nanomanufacturing, Vol.1, pp. 105-116.
30. Maekawa, K., and Itoh, A., 1995, "Friction and tool wear in nano-scale machining - A molecular dynamics approach," Wear, Vol.188, pp. 115-122.
31. Chandrasekaran, N., Khajavi, A. N., Raff, L. M., and Komanduri, R., 1998, "A new method for molecular dynamics simulation of nanometric cutting," Philosophical Magazine B, Vol.77, pp. 7-26.
32. Komanduri, R., Narulkar, R., and Raff, L. M., 2004, "Monte Carlo simulation of nanometric cutting," Philosophical Magazine, Vol.81, pp. 1155-1183.
33. Fang, T. H., and Weng, C. I., 2000, "Three-dimensional molecular dynamics analysis of processing using a pin tool on the atomic scale," Nanotechnology, Vol.11, pp. 148-153.
34. Daw, M. S., Foiles, S. M., and Baskes, M. I., 1993, "The Embedded Atom Method: A review of theory and applications," Materials Science Reports, Vol.9, pp. 251-310.
35. Plimpton, S. J., 1995, "Fast parallel algorithms for short-range molecular dynamics," Journal of Computational Physics, Vol.117, pp. 1-19.
36. Plimpton, S. J., Pollock, R., and Stevens, M., 1997, "Particle-mesh Ewald and rRESPA for parallel molecular dynamics simulations," Proc of the Eighth SIAM Conference on Parallel Processing for Scientific Computing, Minneapolis, MN.
37. The Big Red Cluster, Indiana University: http://rc.uits.iu.edu/hDs/ rcsearch/bigred/
38. Shaw, M. C., Metal Cutting Principles, 2nd ed. New York: Oxford University Press, 2005.
39. Huang, L., Chen, J. C., and Chang, T., 1999, "Effect of tool/chip contact length on orthogonal turning performance," Journal of Industrial Technology, Vol.15(2).
40. Gunay, M., Asian, E., Korkut, I., and Seker, U., 2004, "Investigation of the effect of rake angle on main cutting force," International Journal of Machine Tools and Manufacture, Vol.44, pp. 953-959.
41. Günay, M., Korkut, I., Asian, E., and Seker, U., 2005, "Experimental investigation of the effect of cutting tool rake angle on main cutting force," Journal of Materials Processing Technology, Vol.166, pp. 44-49.
42. Saglam, H., Unsacar, F., and Yaldiz, S., 2006, "Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature," International Journal of Machine Tools and Manufacture, Vol.46, pp. 132-141.