Calibration and validation of a modified ASM1 using long-term simulation of a full-scale pulp mill wastewater treatment plant

Environmental Technology

Volumn 31, Issue 5, 2010, Pages 555-566

  Keskitalo, Jukka ^a   La Cour Jansen, Jes ^b   Leiviskä, Kauko ^a  

^a UNIVERSITY OF OULU   (Finland)

^b LUND UNIVERSITY   (Sweden)

Author keywords

Computer simulation; Full scale WWTP; Model calibration; Modified activated sludge model no. 1; Pulp and paper wastewater

Indexed keywords

ACTIVATED SLUDGE PROCESS; BIOACTIVITY; BIOCHEMICAL OXYGEN DEMAND; CALIBRATION; COMPUTATIONAL METHODS; COMPUTER SIMULATION; EFFLUENTS; KRAFT PROCESS; KRAFT PULP; MATHEMATICAL MODELS; NITROGEN REMOVAL; NUTRIENTS; PAPER; PAPER AND PULP MILLS; SEWAGE PUMPING PLANTS; WASTEWATER; WASTEWATER RECLAMATION; WASTEWATER TREATMENT; WATER RECYCLING; WATER TREATMENT PLANTS;

ACTIVATED SLUDGE MODEL NO.1; BATCH EXPERIMENTS; BLEACHED KRAFT PULPS; CALIBRATED MODEL; LONG TERM SIMULATION; MEASUREMENT CAMPAIGN; MODEL CALIBRATION; MODEL INPUTS; MODEL PERFORMANCE; MODIFIED ACTIVATED SLUDGE MODEL NO. 1; PROCESS DATA; PULP AND PAPER; PULP AND PAPER INDUSTRY; PULP AND PAPER WASTEWATER; PULP MILL; SIMULATION RESULT; TREATMENT PLANTS; TROUBLESHOOTING; WASTEWATER CHARACTERIZATION; WASTEWATER TREATMENT PLANTS;

PAPER AND PULP INDUSTRY;

OXYGEN;

ACTIVATED SLUDGE; CALIBRATION; COMPUTER SIMULATION; EFFLUENT; NITROGEN; NUMERICAL MODEL; POLLUTANT REMOVAL; WASTEWATER; WATER TREATMENT;

ACTIVATED SLUDGE; AMMONIFICATION; ARTICLE; CALIBRATION; COMPUTER SIMULATION; HYDROLYSIS; OXYGEN CONSUMPTION; PULP MILL; VALIDATION PROCESS; WASTE WATER; WASTE WATER TREATMENT PLANT;

EID: 77951202426     PISSN: 09593330     EISSN: 1479487X     Source Type: Journal    
DOI: 10.1080/09593330903563802     Document Type: Article

References (21)

1. M. Doble and A. Kumar, Biotreatment of Industrial Effluents, Butterworth-Heinemann, Burlington, MA, 2005.
2. The European Integrated Pollution Prevention and Control Bureau (IPPC), Reference document on best available techniques in the pulp and paper industry, European Commission, Joint Research Centre, Institute for Prospective Technological Studies, Seville, Spain, 2001.
3. M. Ukkonen, Metsäteollisuuden jätevesien häiriö päästöt ja niihin varautuminen, Southeast Finland Regional Environment Centre publications, Valkeala, Finland, 2005.
4. D.S. Lee, C.O. Jeon, J.M. Park, and K.S. Chang, Hybrid neural network modeling of a full-scale industrial wastewater treatment process, Biotechnol. Bioeng. 78 (2002), pp. 670-682.
5. K.V. Gernaye, M.C.M. Loosdrecht, M. Henze, M. Lind, and B. Jørgensen, Activated sludge wastewater treatment plant modelling and simulation: state of the art, Environ. Modell. Softw. 19 (2004), pp. 763-783.
6. D.S. Lee, P.A. Vanrolleghem, and J.M. Park, Parallel hybrid modeling methods for a full-scale wastewater treatment plant, J. Biotechnol. 115 (2005), pp. 317-328.
7. S.W.H. Van Hulle and P.A. Vanrolleghem, Modelling and optimisation of a chemical industry wastewater treatment plant subjected to varying production schedules, J. Chem. Technol. Biotechnol. 79 (2004), pp. 1084-1091.
8. A. Vandekerckhove, W. Moerman, and S.W.H. Van Hulle, Full-scale modelling of a food industry wastewater treatment plant in view of process upgrade, Chem. Eng. J. 135 (2008), pp. 185-194.
9. P.A. Barañao and E.R. Hall, Modelling carbon oxidation in pulp mill activated sludge systems: calibration of Activated Sludge Model no 3, Wat. Sci. Tech. 50 (2004), pp. 1-10.
10. E. Lindblom, Dynamic modelling of nutrient deficient wastewater treatment processes, M.Sc. thesis, Lund University, 2003.
11. G. Tchobanoglous, F.L. Burton, and H.D. Stensel (eds.), Wastewater Engineering: Treatment and reuse, 4th ed., McGraw-Hill, New York, 2003.
12. M. Hagman and J. la C. Jansen, Oxygen uptake rate measurements for application at wastewater treatment plants, Vatten 63 (2007), pp. 131-138.
13. D.H. Eikelboom, Process Control of Activated Sludge Plants by Microscopic Investigation, IWA Publishing, London, 2000.
14. A. Nuhoglu, B. Keskinler, and E. Yildiz, Mathematical modelling of the activated sludge process - the Erzincan case, Process Biochem. 40 (2005), pp. 2467-2473.
15. B. Petersen, K. Gernaey, M. Henze, and P.A. Vanrolleghem, Evaluation of an ASM1 model calibration procedure on a municipal-industrial wastewater treatment plant, J. Hydroinformatics 4 (2002) pp. 15-38.
16. B. Petersen, K. Gernaey, M. Henze, and P.A. Vanrolleghem, Calibration of activated sludge models: a critical review of experimental designs, in Biotechnology for the Environment: Wastewater Treatment and Modeling, Waste Gas Handling, S.N. Agathos and W. Reineke, eds., Kluwer Academic, Dordrecht, The Netherlands, 2003, pp. 101-186.
17. J.B. Copp (ed.), The COST simulation benchmark: description and simulator manual, Office for Official Publications of European Communities, Luxembourg, 2002.
18. M. Henze, C.P.L. Grady, W. Gujer, G.v.R. Marais, and T. Matsuo, Activated Sludge Model no. 1, in Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, M. Henze, W. Gujer, T. Mino, and M.C.M. van Loosdrecht, eds., IWA Publishing, London, 2000.
19. T.A. Clark, P.H. Dare, and M.E. Bruce, Nitrogen fixation in an aerated stabilization basin treating bleached kraft mill wastewater, Water Environ. Res. 69 (1997), pp. 1039-1046.
20. T.H. Bowers, N.M. Reid, and G. Lloyd-Jones, Composition of nifH in a wastewater treatment system reliant on fixation, Appl. Microbiol. Biotechnol. 79 (2008), pp. 811-818.
21. G. Koch, R. Pianta, P. Krebs, and H. Siegrist, Potential of denitrification and solids removal in the rectangular clarifier, Water Res. 33 (1999), pp. 309-318.