Pulse-jet filtration: An effective way to control industrial pollution Part II: Process characterization and evaluation of filter media

Textile Progress

Volumn 42, Issue 1, 2010, Pages 1-97

  Mukhopadhyay, Arunangshu ^a  

^a DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Filter media evaluation; Mechanism; Modeling and simulation; Pulse jet filtration

Indexed keywords

EFFLUENT TREATMENT; FILTRATION; MONITORING; PERFORMANCE ASSESSMENT; POLLUTION; PULSE JET; TESTING; WASTE MANAGEMENT;

EID: 77951145552     PISSN: 00405167     EISSN: 17542278     Source Type: Trade Journal    
DOI: 10.1080/00405160903438367     Document Type: Article

References (329)

1. A. Mukhopadhyay, Textile Progress 41 (2009) p. 195.
2. D. Leith and R.W.Y. Allen, Dust filtration by fabric filters, in Progress in Filtration and Separation, Vol.4, R.J. Wakeman, ed., Elsevier, Rockville, MD, 1986.
3. D. B́emer, R. Ŕegnier, S. Calĺe, D. Thomas, X. Simon, and J.C. Appert-Collin, Filtration des aerosols-performance des ḿedias filtrants. Institut National de Recherche et de Śecurit́e, ND 2241-202-06, 2006. Retrieved September 05, 2009, from http://www.inrs.fr/ htm/filtration aerosols performance medias filtrants.html.
4. K.W. Lee and B.Y.H. Liu, Aerosol Sci. Tech. 1 (1982), p. 147.
5. R.P. Donovan, Fabric Filtration for Combustion Sources-Fundamentals and Basic Technology, Marcel Dekker, New York and Basel, 1985.
6. S.M. Maini, S.P. Hersh, and P.A. Tucker, Textile Progress 26 (1995) p. 1.
7. T.K. Ray, Air Pollution Control in Industries. Volume I. Theory, Selection and Design of Air Pollution Control Equipments, Tech Books International, New Delhi, India, 2004.
8. W. Licht, Air Pollution Control Engineering, Basic Calculations for Particulate Collection, 2nd ed., Marcel Dekker, New York, 1988.
9. D. Purchas and K. Sutherland, Handbook of Filter Media, Elsevier Advanced Technology, Kidlington, UK, 2001.
10. K.R. Spurny, Aerosol filtration science at the end of the 20th century, Chapter 2, in Advances in Aerosol Filtration, K.R. Spurny, ed., Lewis Publishers, Boca Raton, FL, 1998, pp. 13-24.
11. O. Lastow and A. Podgorski, Single-fiber collection efficiency, Chapter 3, in Advances in Aerosol Filtration, K.R. Spurny, ed., Lewis Publishers, Boca Raton, FL, 1998, pp. 25-51.
12. B. Huang, Q. Yao, S.-Q. Li, Q. Zhao, H.-L. Song, and C.-F. You, Powder Tech. 163 (2006), p. 125.
13. R. Brown, Air Filtration: An Integrated Approach to the Theory and Application of Fibrous Filters, Pergamon Press, Oxfordshire, UK, 1993.
14. W.C. Hinds, Aerosol Technology: Properties in Behavior and Measurement of Airborne Particles, 2nd ed., John Wiley & Sons, New York, 1999.
15. C.-S. Wang, Powder Tech. 118 (2001), p. 166.
16. J. Steffens and J.R. Coury, Separ. Purif. Tech. 58 (2007), p. 99.
17. T.C. Dickenson (ed.), Filters and Filtration Handbook, 4th ed., Elsevier Science, Oxford, UK, 1997.
18. N. Mao, Y. Yao, M. Hata, M. Wada, and C. Kanaoka, Powder Tech. 180 (2008), p. 109.
19. C. Huachang, J. Zhongli, S. Dongmei, and C. Lishan, Chin. J. Chem. Eng. 17 (2009), p. 219.
20. D. Leith and M.J. Ellenbecker, ATM Environment 14 (1980), p. 845.
21. D. Leith and M.J. Ellenbecker, Aerosol Sci. Tech. 1 (1982), p. 401.
22. D. Leith and M.J. Ellenbecker, Overall and particle-dependent mass flux from a pulse-jet filter, in Harnessing Theory for Practical Applications, Proceedings of the World Filtration Congress III, (September 13-17) Downington, PA, 1982, pp. 1-8.
23. X. Simon, D. B́emer, S. Calĺe, D. Thomas, and R. Ŕegnier, Filtration 5 (2005), p. 52.
24. K.R. Spurny, J. Aerosol Sci. 28 (1997), p. 391.
25. R. Dennis and H.A. Klemm, J. Air Pollut. Control Assoc. 30 (1980), p. 38.
26. D.S. Leith and M.W. First, J. Air Pollut. Control Assoc. 27 (1977), p. 754.
27. D. Leith and M.J. Ellenbecker, J. Air Pollut. Control Assoc. 30 (1980), p. 877.
28. D.C. Walsh, Filtrat. Separ. 33 (1996), p. 501.
29. R. Dennis, R.W. Cass, and J.E. Langley, Development of Database and Fabric Filtration Models for the Design of Particulate Control Systems, U.S. Environmental Protection Agency, Particulate Technology Branch, Research Triangle Park, NC, 1977.
30. L. Theodore and J. Reynolds, J. Air Pollut. Control Assoc. 29 (1979), p. S870.
31. B. Bach and E. Schmidt, J. Hazard. Mater. 144 (2007), p. 673.
32. K. Morris and C.A. Millington, Filtrat. Separ. 20 (1983), p. 478.
33. H. Umhauer, S. Berbner, and G. Hemmer, Part. Part. Syst. Char. 17 (2000), p. 3.
34. J. Binnig, J. Meyer, and G. Kasper, Powder Tech. 189 (2009), p. 108.
35. C.T. Martin, Fine filtration fabric options designed for better dust control and to meet PM2.5 standards. 1999 IEEE-IAS/PCA Cement Industry Technical Conference. April 11-15, 1999, Roanoke, Virginia, IEEE Catalog Number 99CH36335, pp. 385-393.
36. A.C. Payatakes and C. Tien, J. Aerosol Sci. 7 (1976), p. 85.
37. D.C. Walsh and J.I.T. Stenhouse, J. Aerosol Sci. 28 (1997), p. 307.
38. H.O. Kono, B. Jordan, T. Ohtake, and D.H. Smith, Aerosol Sci. Tech. 29 (1998), p. 236.
39. L.W. Barrett and A.D. Rousseau, Am. Ind. Hyg. Assoc. J. 59 (1998), p. 532.
40. M. Ferer and H. Smith, Aerosol Sci. Tech. 29 (1998), p. 246.
41. D.H. Smith, V. Powell, G. Ahmadi, and M. Ferer, Aerosol Sci. Tech. 29 (1998), p. 224.
42. C. Sioutas, P. Koutrakis, P.Y.Wang, P. Babich, and M.Wolfson, Aerosol Sci. Tech. 30 (1999), p. 71.
43. R.C. Brown and D. Wake, J. Aerosol Sci. 30 (1999), p. 227.
44. W. Höflinger, Fundamentals of the compression behavior of dust filter cakes, Chapter 18, in Advances in Aerosol Filtration, K.R. Spurny, ed., Lewis, Boca Raton, FL, 1998, pp. 349-360.
45. Y.-H. Cheung and C.-J. Tsai, Aerosol Sci. Tech. 29 (1998), p. 315.
46. R. Klingel and F. Löffler, Filtrat. Separ. 20 (1983), p. 205.
47. C.R. Holland, Filtrat. Separ. 23 (1986), p. 372.
48. R. Dennis and J.A. Dirgo, Filtrat. Separ. 18 (1981), p. 394.
49. J.D. Japuntich, J.I.T. Stenhouse, and B.Y.H. Liu, J. Aerosol Sci. 28 (1994), p. 147.
50. D. Thomas, P. Penicot, P. Contal, D. Leclerc, and J. Vendel, Chem. Eng. Sci. 56 (2001), p. 3549.
51. C.-C. Chen, W.-Y. Chen, S.-H. Huang, W.-Y. Lin, Y.-M. Kuo, and F.-T. Jeng, Aerosol Sci. Tech. 34 (2001), p. 262.
52. S. Schmidt, Filtrat. Separ. 32 (1995), p. 789.
53. P.V. Bush, T.R. Snyder, and R.L. J. Air. Pollut. Control Assoc. 39 (1989), p. 228.
54. V.H. Belba, W.T. Grubb, and R. Chang, J. Air Waste Manag. Assoc. 42 (1992), p. 209.
55. F.M. Tiller, Chem. Eng. Prog. 49 (1953), p. 467.
56. M.L. Aguir and J.R. Coury, Ind. Eng. Chem. Res. 35 (1996), p. 3673.
57. M.G. Hajra, K. Mehta, and G.G. Chase, Separ. Purif. Tech. 30 (2003), p. 79.
58. A. Balazy and A. Podǵorski, The influence of the filtration conditions on the optimization of aerosol filtration in fibrous filters, in Proceedings of the European Aerosol Conference, Budapest, 2004, pp. S969-S970.
59. B.F. Ruth, Ind. Eng. Chem. 27 (1935), p. 708.
60. V. Havlicek, Inter. J. Air Water Poll. 4 (1961), p. 225.
61. M. Saleem and G. Krammer, Powder Tech. 173 (2007) p. 93.
62. X. Simon, S. Chazelet, D. Thomas, D. B́emer, and R. Ŕegnier, Powder Tech. 172 (2007), p. 67.
63. M.J. Ellenbecker and D. Leith, J. Air Poll. Control Assoc. 29 (1979), p. 1236.
64. J. Sievert and F. Löffler, Dust dislodgement in pulse-jet fabric filters, in Proceedings of the FirstWorld Congress on Particle Technology, Part IV,Nurnburg, Germany, 1986, pp. 111-126.
65. D.A. Lundgren and K.T. Whitby, Ind. Eng. Chem. Process Des. Dev. 4 (1965), p. 345.
66. E.R. Frederick, Chem. Eng. 68 (1961), p. 107.
67. S. Bhutra and A.C. Payatakes, J. Aerosol Sci. 10 (1979), p. 445.
68. R. Lathrache, H.J. Fissan, and S. Neumann, J. Aerosol Sci. 17 (1986), p. 446.
69. M.J. Oak and D.A. Saville, J. Colloid Interface Sci. 76 (1980), p. 259.
70. G.W. Penney and J.G. Uber, IEEE Trans. Ind. Appl. 21 (1985), p. 523.
71. E.R. Frederick, J. Air Pollut. Control Assoc. 30 (1980), p. 426.
72. P.W. Chudleigh and N.W. Bainbridge, Filtrat. Separ. 17 (1980), p. 309.
73. H.S. Yu and R.K. Teague, Performance of electrostatic fiber bed, in Extended abstracts of 1st Annual Conference of American Association for Aerosol Research, Santa Monica, CA, 17-19 February, 1982, pp. 19-3-19-4.
74. G.E.R. Lamb, P.A. Costanza, and D.J. O'Meara, Textil. Res. J. 48 (1978), p. 566.
75. G.O. Nelson, W. Bergman, H.H. Miller, R.D. Taylor, C.P. Richards, and A.H. Biermann, Am. Ind. Hyg. Assoc. J. 39 (1978), p. 472.
76. G.E.R. Lamb and P.A. Costanza, Filtrat. Separ. 17 (1978), p. 319.
77. G.P. Greiner, D.A. Furlong, D.W. Van Osdeil, and L.S. Hovis, J. Air Pollut. Control Assoc. 31 (1981), p. 1125.
78. G.W. Penney, Electrostatic dust filter. U.S. Patent No. 3,910,779.7, October 1975.
79. G.W. Penney, Electrostatic dust filter. U.S. Patent No. 3,966.435.29, June 1976.
80. G.W. Penney, Powder Tech. 18 (1977), p. 111.
81. G.W. Penney, Electrostatic effects in fabric filtration - Vol. I Fields, fabrics, and particles (annotated data), EPA-60017-78-142a (NTIS No. PB-288576), September 1978.
82. G.E.R. Lamb, R.I. Jones, and W.B. Lee, Textil. Res. J. 54 (1984), p. 308.
83. R.P. Donovan, L.S. Hovis, G.H. Ramsey, and D.S. Ensor, Aerosol Sci. Tech. 1 (1982), p. 385.
84. G.E.R. Lamb and K.T. Duffy-Morris, Textil. Res. J. 59 (1989), p. 257.
85. R.A. Fjeld and T.M. Owens, IEEE Trans. Ind. Appl. 24 (1988), p. 725.
86. A.C.B. Neiva and L. Goldstein, Chem. Eng. Process. 42 (2003), p. 495.
87. D. Leith, D.D. Gibson, and M.W. First, J. Air Pollut. Control Assoc. 28 (1978), p. 696.
88. A. Mukhopadhyay and K. Dhawan, Powder Tech. 195 (2009), p. 128.
89. W. Gregg and G.J. Davies, Improving pulse-jet dust collector operation: The effect of gas stream inlet design, in The User and Fabric Filtration Equipment VI, Proceedings of an International Specialty Conference, Air & Waste Management Association, Toronto, Ontario, 1992, pp. 37-61.
90. S.-J. Yoa, Y.-S. Cho, Y.-S. Choi, and J.-H. Baek, Kor. J. Chem. Eng. 18 (2001), p. 539.
91. Y.O. Park, S.D. Kim, J.E. Son, Y.W. Rhee, and W.S. Choi, Kor. J. Chem. Eng. 17 (2000), p. 579.
92. H. Zhang and G. Ahmadi, Powder Tech. 116 (2001), pp. 53-68.
93. S.J. Park, H.K. Choi, Y.O. Park, and J.E. Son, Aerosol Sci. Tech. 37 (2003), p. 685.
94. G. Ahmadi, Particle transport and deposition in the hot-gas filter at Wilsonville, US Department of Energy, Scientific and Technical Information (DOE Award No. DE-FC26 - 98FT40447-01; Report issued on June 24, 2009). Retrieved September, 2009, from www.osti.govbridgeservletspurl793319-sOMvph...793319.pdf.
95. D. Leith, M.W. First, and H. Feldmann, J. Aer. Poll. Control Assoc. 27 (1977), p. 636.
96. D. Leith, M.W. First, and D.D. Gibson, Filtrat. Separ. 15 (1978), p. 400.
97. A. Ergüdenler, W. Tang, C.M.H. Brereton, C.J. Lim, J.R. Grace, and T.J. Gennrich, Separ. Purif. Tech. 11 (1997), p. 1.
98. M. Saleem and G. Krammer, J. Hazard. Mater. 144 (2007), p. 677.
99. J.R. Gabites, J. Abrahamson, and J.A. Winchester, Powder Tech. 187 (2008), p. 46.
100. K.T. Hindy, Atmos. Environ. 20 (1986), p. 1517.
101. Pulse valves for dust collector systems. (n.d.). Emerson Electric Co., ASCO Numatics, France. Retrieved July 11, 2009, from www.ascojoucomatic.it/ images/site/upload/ en/.../X003jagb.pdf.
102. K. Morris, R.W.K. Allen, and R. Clift, Filtrat. Separ. 24 (1987), p. 41.
103. S. Berbner and F. Löffler, Powder Tech. 78 (1994), p. 273.
104. J. Sievert and F. Löffler, Filtrat. Separ. 24 (1987), p. 424.
105. J.P.K. Seville, W. Cheung, and R. Clift, Filtrat. Separ. 26 (1989), p. 187.
106. S. Laux, B. Giernoth, H. Bulak, and U. Renz, Aspects of pulse jet cleaning of ceramic filter elements, in Proceeding of the 12th International Conference on Fluidized Bed Combustion, San Diego, CA: ASME, 1993.
107. G. Wien, J. Sonnenberg, and E. Schmidt, Chem. Eng. Tech. 27 (2004), p. 1249.
108. E. Schmidt, China Particuology 3 (2005), p. 10.
109. M.J. Ellenbecker and D. Leith, Filtrat. Separ. 18 (1981), p. 41.
110. W. Humphries, Powder Tech. 28 (1981), p. 189.
111. D. Koch, W. Cheung, J.P.K. Seville, and R. Clift, Filtrat. Separ. 29 (1992), p. 337.
112. D.H. Smith, G.J. Haddad, and M. Ferer, Energ. Fuel. 11 (1997), p. 1006.
113. K. Morris and R.W.K. Allen, Filtrat. Separ. 33 (1996), p. 339.
114. R. Dennis, J.E. Wilder, and D.L. Harmon, J. Air. Pollut. Control Assoc. 31 (1981), p. 987.
115. H.C. Lu and C.J. Tsai, J. Environ. Eng. 129 (2003), p. 811.
116. J.L. Koehler and D. Leith, Atmos. Environ. 17 (1983), p. 1909.
117. R. Klingel and F. Loffler, Influence of cleaning intensity on pressure drop and residual dust areal density in a pulse-jet fabric filter, in Proceedings of the Filtech Conference, London, 1983, p. 306.
118. J. Sievert and F. Löffler, Chem. Eng. Pro. 26 (1989), p. 179.
119. S. Laux, B. Giernoth, H. Bulak, and U. Renz, Aspects of pulse-jet cleaning of ceramic filter elements, in Proceedings of the 2nd International Symposium on Gas Cleaning at High Temperatures, R. Clift and J.P.K. Seville, eds., Blackie Academic & Professional, Glasgow, UK, 1993, pp. 203-224.
120. W.J. Morris, Filtrat. Separ. 21 (1984), p. 50.
121. C.J. Bustard, K.M. Crushing, and R.L. Chang, J. AirWaste Manag. Assoc. 42 (1992), p. 1240.
122. S.Yu. Panov, Yu.N. Shapovalov, Yu.V. Krasovitskii, and A.A. Rusanov, Chem. Petrol. Eng. 42 (2006), p. 706.
123. E. Rothwell, Filtrat. Separ. 28 (1991), p. 420.
124. E. Rothwell, Filtrat. Separ. 28 (1991), p. 341.
125. R.W.K. Allen, H.G.D. Goyder, and K. Morris, Chem. Eng. Res. Des. 77 (1999), p. 223.
126. De M. Ravin, W. Humphries, and R. Postle, Filtrat. Separ. 25 (1988), p. 201.
127. W. Humphries and J.J. Madden, Filtrat. Separ. 20 (1983), p. 40.
128. H.C. Lu and C.J. Tsai, J. Environ. Eng. 125 (1999), p. 583.
129. D. Koch, J.P.K. Seville, and R. Clift, Powder Tech. 86 (1996), p. 21.
130. H.C. Lu and C.J. Tsai, Aerosol Sci. Tech. 29 (1998), p. 510.
131. H.C. Lu and C.J. Tsaï, Environ. Sci. Tech. 30 (1996), p. 3243.
132. E. Rothwell, The design and operating characteristics of reverse-jet assemblies for pulse jet dust collectors, in Proceedings of the 4th World Filtration Congress, Part I, Ostend, Belgium, 2.43-2.53, 1986.
133. C.-J. Tsai, M.L. Tsai, and H.C. Lu, Separ. Sci. Tech. 35 (2000), p. 211.
134. X. Simon, D. Thomas, D. B́emer, S. Calĺe, R. Ŕegnier, and P. Contal, Filtration 4 (2004), p. 253.
135. F. Löffler and R. Klingel, Filtrat. Separ. 20 (1983), p. 205.
136. S. Calĺe, D. B́emer, D. Thomas, P. Contal, and D. Leclerc, Ann. Occup. Hyg. 45 (2001), p. 115.
137. R. Dennis and J.E.Wilder, Fabric Filter Cleaning Studies, (Rep. EPA 650/2-75-009), National Environmental Research Center, Washington, DC, 1975.
138. S. Calĺe, P. Contal, D. Thomas, D. B́emer, and D. Leclerc, Powder Tech. 128 (2002), p. 213.
139. J.P.K. Seville, R. Clift, C.J. Withers, and W. Keidel, Filtrat. Separ. 26 (1989), p. 265.
140. A. Dittler, B. Gutmann, R. Lichtenberger, H. Weber, and G. Kasper, Powder Tech. 99 (1998), p. 177.
141. A. Kavouras and G. Krammer, Chem. Eng. Sci. 58 (2003), p. 223.
142. A. Dittler and G. Kasper, Adv. Filtrat. Separ. Tech. 13 (1999), p. 137.
143. E. Bakke, J. Air. Pollut. Control Assoc. 24 (1974), p. 1150.
144. K. Morris, C.J. Cursley, and R.W.K. Allen, Filtrat. Separ. 28 (1991), p. 24.
145. E. Rothwell, Filtrat. Separ. 27 (1990), p. 345.
146. K. Morris, Filtrat. Separ. 28 (1991), p. 275.
147. C.-J. Tsai and H.-C. Lu, Aerosol Sci. 29(Suppl. I) (1998), p. S1079.
148. G.D. Lanois and A.Wiktorsson, Current status and future potential for high-ratio fabric filter technology applied to utility coal-fired boilers, in Proceedings of the First Conference on Fabric Filter Technology for Coal-fired Power Plants, Denver, CO, 1982, pp. 4-125-4-154.
149. Fabric filter, ALSTOM power. Retrieved June 12, 2008, from www.power.alstom.com/ looks/ alstomV2/frontofficeScripts/index.php?languageId= EN&dir=/.../power/fabric filter/.
150. J-H. Choi, Y-G. Seo, and J-W. Chung, Powder Tech. 114 (2001), p. 129.
151. S. Berbner and F. Löffler, Pulse jet cleaning of rigid filter elements at high temperatures, in Proceedings of the 2nd International Symposium on Gas Cleaning at High Temperatures, R. Clift and J.P.K. Seville, eds., Blackie Academic & Professional, Glasgow, 1993, pp. 225-243.
152. C.M. Stephen, S.K. Grannel, J.P.K. Seville, S. Ivatt, and G.K. Burnard, High temperature gas cleaning, E. Schmidt, P. Gang, T. Pilz and A. G. Dittler, eds., G. Braun Printconsult, Karlsruhe, Germany, 1996.
153. R. Mai, M. Fronöfer, and H. Leibold, Flow characteristics of filter candles during recleaning, in Proceedings of the 3rd International Symposium on Gas Cleaning at High Temperature, Karlsruhe, Germany, 1996, pp. 194-206.
154. S. Berbner and T. Pilz, Powder Tech. 86 (1996), p. 103.
155. I. Schildermans, J. Baeyens, and K. Smolders, Filtrat. Separ. 41 (2004), p. 26.
156. G. Ziskind, L.P. Yarin, S. Peles, and C. Gutfinger, Aerosol Sci. Tech. 36 (2002), p. 652.
157. M. Hata, M. Furuuchi, C. Kanaoka, and T. Inagaki, Analysis of pulse-jet cleaning of dust cake from ceramic filter element. US Department of Energy, DOE Scientific and Technical Information, 2009. Retrieved March 10, 2009, from http://www.osti.gov/bridge/servlets/purl/835879- D7nRSk/native/835879.pdf.
158. A. Kavouras and G. Krammer, Powder Tech. 133 (2003), p. 134.
159. A. Dittler and G. Kasper, Chem. Eng. Process. 38 (1999), p. 321.
160. F. Löffler and J. Sievert, Filtrat. Separ. 24 (1987), p. 110.
161. G.E.R. Lamb, Textil. Res. J. 57 (1987), p. 472.
162. M.J. Ellenbecker and D. Leith, Powder Tech. 25 (1980), p. 147.
163. C.R.N. Silva, V.S. Negrini, K.L. Aguiar, and J.R. Coury, Powder Tech. 101 (1999), p. 165.
164. Q. Zhang and E. Schmidt China Particuology 7 (2009), p. 45.
165. W. Duo, N.F. Kirkby, J.P.K. Seville, and R. Clift, Chem. Eng. Sci. 52 (1997), p. 141.
166. C. Kanaoka and M. Amornkitbamrung, Powder Tech. 118 (2001), p. 113.
167. G. Ahmadi and D.H. Smith, Aerosol Sci. Tech. 36 (2002), p. 665.
168. Z.L. Ji, S. Peng, and L.C. Tan, Chin. J. Chem. Eng. 11 (2003), p. 626.
169. S. Ito, Pulse-jet cleaning and internal flow in a large ceramic tube filter, in Proceedings of the 2nd International Symposium on Gas Cleaning at High Temperatures, R. Clift and J.P.K. Seville, eds., Blackie Academic & Professional, Glasgow, UK, 1993, pp. 266-279.
170. Z.L. Ji, X.B. Meng, M.X. Shi, and F.X. Ding, The interim process between pulse-backing cleaning and normal filtration processes of ceramic filter, in Proceedings of the 4th International Symposium on Gas Cleaning at High Temperatures, A. Dittler and G. Kasper, eds., Karlsruhe, Germany, 1999, pp. 211-219.
171. Z.L. Ji, H.Q. Jiao, and H.H. Chen, Chin. J. Chem. Eng. 13 (2005), p. 178.
172. S. Ito, T. Tanaka, and S. Kawamura, Powder Tech. 100 (1998), p. 32.
173. J.-H. Choi, S.-M. Kum, J.-J. Ahn, Y.-C. Bak, J.-H. Chung, and J.-W. Lee, Characteristics of pulse cleaning in the ceramic filter unit at high temperature, 2009. Retrieved September 05, 2009, from http://www.netl.doe.gov/ publications/proceedings/99/99korea/jhchoi.pdf.
174. C. Huachang, Y. Liang, C. Joo-Hong, and J. Zhongli, Chin. J. Chem. Eng. 16 (2008), p. 306.
175. A.C.B. Neiva, L. Goldstein, P. Calvo, L.M. Romeo, and J. Arauzo, Modeling cake compressibility in gas filtration, in Proceedings of the 4th International Symposium on Gas Cleaning at High Temperatures, Vol.2, G. Kasper, G. Hemmer and A. Dittler, eds., Karlsruhe, Germany, 1999, pp. 83-95.
176. R.C. Carr and W.C. Smith, J. Air Pollut. Control Assoc. 34 (1984), p. 281.
177. J.-H. Kim, Y. Liang, K.-M. Sakong, J.-H. Choi, and Y.-C. Bak, Powder Tech. 181 (2008), p. 67.
178. H. Kamiya, K. Deguchi, J. Gotou, and M. Horio, Powder Tech. 118 (2001), p. 160.
179. T. Barnett, Filtrat. Separ. 37 (2000), p. 28.
180. M.J. Ellenbecker and D. Leith, Powder Tech. 36 (1983), p. 13.
181. S.J. Miller and D.L. Landal, Pulse-jet baghouse performance improvement with flue gas conditioning. DOE Scientific and Technical Information, October 1992. Retrieved October 4, 2009, from http://www.osti.gov/bridge/product.biblio. jsp?query id=0& page=0&osti id=10142658.
182. V.H. Morcos, Energy 21 (1996), p. 9.
183. A. Gupta, V.J. Novick, P. Bisawas, and P.R. Monson, Aerosol Sci. Tech. 19 (1993), p. 94.
184. Y. Endo, D.-R. Chen, and D.Y.H. Pui, Powder Tech. 98 (1998), p. 241.
185. J.-H. Choi, S.-J. Ha, Y.-C. Bak, and Y.-O. Park, Kor. J. Chem. Eng. 19 (2002), p. 1085.
186. J.-H. Choi, S.-J. Ha, and Y.-O. Park, Kor. J. Chem. Eng. 19 (2002), p. 711.
187. A.S. Viner, R.P. Donovan, D.S. Ensor, and L.S. Hovis, J. Air Pollut. Control Assoc. 34 (1984), p. 872.
188. C.C. Sherman, D. Leith, and M.J. Symons, Aerosol Sci. Tech. 13 (1990), p. 426.
189. C.N. Davies, Air Filtration, Academic Press, New York, NY, 1973.
190. M.S. Atwal, Textil. Res. J. 57 (1987), p. 574.
191. P.K. Herman, M.J. Lehmann, and Y.K. Velu, J. Textile Apparel Tech. Manag. 5 (2006), p. 1.
192. X. Wang, K. Kim, C. Lee, and J. Kim, Fibers & Polymers 19 (2008), p. 34.
193. R. Dennis and L.S. Hovis, Pulse-jet filtration theory: A state of the art assessment, in Fourth Symposium on the Transfer and Utilization of Particulate Control Technology, EPA-60019- 84-025a, 1984, pp. 22-36.
194. P. Gang, Filtrat. Separ. (International Edition) 9 (2009), p. 6.
195. A. Viner, G.P. Grenier, and L.S. Hovis, J. Air Pollut. Control Assoc. 38 (1988), p. 1573.
196. N.Z. Shilling, K.R. Murphy, and C.P. Gunzelman, J. Air Pollut. Control Assoc. 36 (1986), p. 316.
197. D.H. Pontius and W.B. Smith, J. Air Pollut. Control Assoc. 38 (1988) pp. 39.
198. M. Crawford, Air Pollution Control Theory. Tata McGraw Hill, New Delhi, 1980.
199. H. Sasatsu, N. Misawa, M. Shimizu, and R. Abe, Powder Tech. 118 (2001), p. 58.
200. Ch. Stöcklmayer and W. Höflinger, Simulat. Pract. Theory 6 (1998), p. 281.
201. Ch. Stöcklmayer and W. Höflinger Math. Comput. Simul. 46 (1998), p. 601.
202. F.M. Tiller and J.H. Kwon, Am. Inst. Chem. Eng. J. 44 (1998), p. 2159.
203. E. Schmidt, Powder Tech. 86 (1996), p. 113.
204. W. Höflinger, Ch. Stöcklmayer, and A. Hackl, Filtrat. Separ. 31 (1994), p. 807.
205. H. Theliander and M. Fathi-Najafi, Filtrat. Separ. 33 (1996), p. 417.
206. I. Tosun, Chem. Eng. Sci. 41 (1986), p. 2563.
207. K. Stamatakis and C. Tien, Chem. Eng. Sci. 46 (1991), p. 1917-1933.
208. W. Duo, J.P.K. Seville, N.F. Kirkby, H. Biuchele, and C.K. Cheung, Chem. Eng. Sci. 52 (1997), p. 153.
209. G. Ahmadi and D.H. Smith, Aerosol Sci. Tech. 29 (1998), p. 183.
210. T.G. Chuaha, C.J. Withers, and J.P.K. Seville, Separ. Purif. Tech. 40 (2004), p. 47.
211. W. Tanthapanichakoon, T. Charinpanitkul, W. Jintaworn, J. Laksameearunotai, M. Amornkitbamrung, T. Fukui, M. Yoshikawa, and M. Naito, Powder Tech. 180 (2008), p. 245.
212. Ch. Stöcklmayer, A. Krammer, and W. Höflinger, Using a computer simulation method for calculating compression parameters from experimentally obtained pressure drop curves in dust cake filtration, in Proceedings of International Symposium on Filtration and Separation of Fine Dust, Vienna, Austria, April 24-26 1996, pp. 126-139.
213. E. Schmidt, Filtrat. Separ. 34 (1997), p. 365.
214. Y.-W. Jung and K.-J. Jeon, Powder Tech. 141 (2004), p. 1.
215. J.-H. Choi, S.-J. Ha, and H.-J. Jang, Powder Tech. 140 (2004), p. 106.
216. J.-H. Choi, Y.-C. Bak, H.J. Jang, J. Hyung Kim, and J. Hyun Kim, Kor. J. Chem. Eng. 21 (2004), p. 726.
217. M. Ferer and D.H. Smith, J. Appl. Phys. 81 (1997), p. 1737.
218. E. Schmidt, Chem. Eng. Tech. 21 (1998), p. 26.
219. M.V. Ferer and D.H. Smith, Chem. Eng. Sci. 55 (2000), p. 5003.
220. T. Pilz and F. Löffler, Influence of Humidity upon Dust Separation with Surface Filters, Filtec Conference, Karlsruhe, 1995, pp. 139-148.
221. J. Ju, M.-S. Chiu, and C. Tien, Powder Tech. 118 (2001), p. 79.
222. S. Calĺe, P. Contal, D. Thomas, D. B́emer, and D. Leclerc, Powder Tech. 123 (2002), p. 40.
223. Ch. Stöcklmayer and W. Höflinger, Filtrat. Separ. 35 (1998), p. 373.
224. A. Dittler, M.V. Ferer, P. Mathur, P. Djuranovic, G. Kasper, and D.H. Smith, Powder Tech. 124 (2002), p. 55.
225. Z.L. Ji, M.X. Shi, and F.X. Ding, Powder Tech. 139 (2004), p. 200.
226. H. Li, Z. Ji, X. Wu, and J.-H. Choi, Powder Tech. 173 (2007), p. 82.
227. N. Döring, J. Meyer, and G. Kasper, Chem. Eng. Sci. 64 (2009), p. 2483.
228. J. Ju, M.-S. Chiu, and C. Tien, J. Air Waste Manag. Assoc. 50 (2000), p. 600.
229. A. Kavouras and G. Krammer, Powder Tech. 154 (2005), p. 24.
230. H. Zhuang and M.-S. Chiu, J. Air Waste Manag. Assoc. 51 (2001), p. 1035.
231. J. Ju, M.-S. Chiu, and C. Tien, Chem. Eng. Res. Des. 78 (2000), p. 581.
232. S.-D. Kim, J.-E. Son, Y.-O. Park, D.-K. Chung, and Y. Kang, Kor. Chem. Eng. Res. 42 (2004), p. 318.
233. D.E. Goldberg, Genetic Algorithms in Search, Optimization and Machine Learning, Addison- Wesley, New York, 1989.
234. S. Dharmanolla and G.G. Chase, J. Chin. Instit. Chem. Eng. 39 (2008), p. 161.
235. P.N. Chisholm and G.T. Rochelle, Ind. Eng. Chem. Res. 38 (1999), p. 4068.
236. J.A. Marques, J.L. Herrera, A. Garea, and A. Irabien, Simulation of the FGD in-duct injection process at low temperatures with competitive reactions, 5th International Conference on Technologies and Combustion for a Clean Environment, Lisbon, Portugal, 1999.
237. A. Garea, J.R. Viguri, and A. Irabien, Chem. Eng. Sci. 52 (1997), p. 715.
238. G. Krammer, H.K. Reissner, and G. Staudinger, Chem. Eng. Process 41 (2002), p. 463.
239. A. Garea, J.L. Herrera, J.A. Marques, and A. Irabien, Chem. Eng. Sci. 56 (2001), p. 1387.
240. G. Krammer, Ch. Brunner, J. Khinast, and G. Staudinger, Ind. Eng. Chem. Res. 36 (1997), p. 1410.
241. A. Garea, J.A. Marques, A. Irabien, H.K. Reissner, A. Kavouras, G. Krammer, and G. Staudinger, KineticModelling of the Dry FGD Process at Low Temperatures Using a Partially Reacted Sorbent. Coal Science Conference, San Francisco, CA, 2001.
242. A. Kavouras, B. Breitschaedel, G. Krammer, A. Garea, J.A. Marques, and A. Irabien, Ind. Eng. Chem. Res. 41 (2002), p. 5459.
243. A. Kavouras and G. Krammer, Chem. Eng. Process. 44 (2005), p. 1277.
244. S.D. Serre and G.D. Silcox, Ind. Eng. Chem. Res. 39 (2000), p. 1723.
245. F. Scala, Environ. Sci. Tech. 35 (2001), p. 4373.
246. J.R.V. Flora, R.A. Hargis,W.J. O'Dowd, H.W. Pennline, and R.D. Vidic, J. AirWaste Manag. Assoc. 53 (2003), p. 478.
247. J.R.V. Flora, R.A. Hargis,W.J. O'Dowd, H.W. Pennline, and R.D. Vidic, J. AirWaste Manag. Assoc. 53 (2003), p. 489.
248. J.R.V. Flora, R.A. Hargis,W.J. O'Dowd, H.W. Pennline, and R.D. Vidic, J. AirWaste Manag. Assoc. 56 (2006), p. 343.
249. F. Scala and H.L. Clack, J. Hazard. Mate. 152 (2008), p. 616.
250. S.P. Mahajan, Pollution Control in Process Industry, Tata McGraw-Hill, New Delhi, India, 1985.
251. C. Zhang, Fundamentals of Environmental Sampling and Analysis. Wiley-Interscience (A John Wiley & Sons, Inc., Publication), New Jersey, 2007.
252. I.M. Hutten, Testing of Nonwoven Filter Media: (Chapter 6) Handbook of Nonwoven Filter Media, Elsevier, Rockville, MD, 2007, pp. 245-290.
253. E. Hardman, Textile in filtration, in Handbook of Technical Textiles, A.R. Horrocks and S.C. Anand, eds., Woodhead Publishing, The Textile Institute, CRC Press, Cambridge, UK, 2000.
254. M. Schobesberger, R. Hemmelmayr, and W. Themmel, Evonik fibers GmbH. Retrieved September 5, 2009, from http://www.p84.com/downloads/publications/.
255. W. McCabe, J. Smith, and P. Harriott, Unit Operations of Chemical Engineering, 7th ed., McGraw Hill, Columbus, OH, 2004.
256. J.M. Coulson, J.F. Richardson, J.R. Backhurst, and J.H. Harker, Chemical Engineering: Particle Technology and Separation Processes, 4th Rev. ed., Butterworth-Heinemann, Oxford, UK, 1996.
257. D.L. Black, M.Q. McQuay, and M.P. Bonin, Science 22 (1996), p. 267.
258. W. Stober, J. Aerosol Sci. 2 (1971), p. 453.
259. H.E. Hesketh, Fine Particles in Gaseous Media, Lewis Publishers, Chelsea, VT, 1986.
260. M.A. Taylor, Powder Tech. 14 (2002), p. 94.
261. A. Bürkholz and R. Polke, Anal. Part. Part. Sys. Charac. 1 (1984), p. 153.
262. N. Chigier, Prog. Energ. Combus. Sci. 17 (1991), p. 211.
263. Y. Shirakawa and S.Watanabe, OnlineMeasurement of Particle Size by Microwave Technology, (Nippon Steel Tech. Rep. No. 49, pp. 9-14), 1991, April.
264. S.J.R. Simons and R.A. Williams, Power Tech. 73 (2002), p. 85.
265. H.G. Merkus, Particle Size Measurements: Fundamentals, Practice, Quality, Particle Technology Series, Vol.17, Springer Science and Business Media, Heidelberg, 2009.
266. Laser diffraction: millennium link for particle size analysis. (n.d.). Sympatec GmbH, Germany. Retrieved July 01, 2009, from http://www.sympatec.com/ LaserDiffraction/ publications/LD 2000 milleniumlink.pdf.
267. J. Cooper, Mater. World 6 (1998), p. 5.
268. Ankersmid particle size analyzers product overview. (n.d.). Australia: PsS & Ankersmid. Retrieved June 10, 2009, from http://www.pss.aus.net/ products/ankersmid/index.html.
269. Ankersmid eyetech series. (n.d.). Australia: PsS & Ankersmid. Retrieved June 10, 2009, from www.ankersmid.co.il.
270. B.B.Weiner,W.W. Tscharnuter, and N. Karasikov, Improvements in accuracy and speed using the time-of-transition method and dynamic image analysis for particle sizing-some realworld examples, in Particle Size Distribution III, American Chemical Society Symposium Series 693, Theodore Provder, ed., ACS, Washington, DC, 1998.
271. T. Allen, Particle Size Measurement, 4th ed., Chapman and Hall, London, 1990.
272. A. Rawle, Basic principles of particle size analysis, Technical paper. Malvern Instruments Limited, UK, 1993. Retrieved October 17, 2008, from www.rci.rutgers.edu/?moghe/ PSD%20Basics.pdf.
273. K. Leschonski, S. Rothele, and U. Menzel, Part. Charact. 1 (1984), p. 7.
274. J.P. Mitchell and M.W. Nagel, J. Aerosol Med. 12 (1999), p. 217.
275. M. Corn, Aerosol Science, C.N. Davis, ed., Academic Press, London, 1966, p. 359.
276. J.F. Bohan, Powder Handling Process. 8 (1996), p. 59.
277. T.A. Poole, Dry Powder Dispersion System for Particle Size Measurement, Amherst Process Instruments, Inc., Hadley, MA, 1995.
278. P. Tang, D.F. Fletcher, H.-K. Chan, and J.A. Raper, Powder Tech. 187 (2008), p. 27.
279. Scanning mobility particle sizerTM spectrometer (model 3034). (n.d.). TSI Incorporated, USA. Retrieved June 25, 2009, from www.tsi.com/en-1033/products/ 2212/scanning mobility particle sizerTM spectrometers.aspx - 86k.
280. DA550 Particulate monitoring systems under continuous fabric filter performance monitoring. (n.d.). Raleigh, NC: PCME. Retrieved June 20, 2009, from http://www.pcmeus. com/pcme da550.pdf.
281. R. Horne, Particulate emission-optical and other methods for continuous monitoring of from a point source, in Industrial Air Pollution Monitoring, A.G. Clarke, ed., Chapman and Hall, London, 1998, pp. 61-80.
282. Y. Yan, Measur. Sci. Tech. 7 (1996), p. 1687.
283. J.Q. Zhang and Y. Yan, Online continuous measurement of particle size using electrostatic sensors. Paper presented at IMTC 2003 Instrumentation and Measurement Technology Conference, Vail, CO, USA, May 20-22, 2003. Retrieved January 2, 2009, from http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber= 01208280.
284. R.M. Carter, Y. Yana, and S.D. Cameron, Flow Meas. Instrum. 16 (2005), p. 309.
285. W. Witt, M. Heuer, and M. Schaller, China Particuology 2 (2004), p. 185.
286. C. Tien, Cake property measurement, Chapter 7, in Introduction to Cake Filtration: Analyses, Experiments and Applications, Elsevier B.V., Netherlands, 2006, pp. 191-235.
287. E. Schmidt and F. Löffler, Part. Part. Syst. Charac. 8 (1991), p. 105.
288. K.T. Hindy, J. Sievert, and F. Löffler, Environ. Inter. 13 (1987), p. 175.
289. E. Schmidt and F. Löffeler, Powder Tech. 60 (1990), p. 173.
290. W. Höflinger, G. Mauschitz, and W. Koschutnig, Cleaning behaviour of textile filter media. European Conference on Filtration and Separation, Godbenburg, June 24-26, 2002.
291. M. Rüther, M. Saleem, H. Bischof, and G. Krammer, Assem. Autom. 25 (2005), p. 196.
292. C. Tien, Powder Tech. 127 (2002), p. 1.
293. G.E. Simmonds, J.D. Bomberger and M.A. Bryner, J. Eng. Fibers Fabrics 2 (2007), p. 1. Available at http://www.jeffjournal.org.
294. V.K. Kothari and A. Mukhopadhyay, Ind. Textile J. 109 (1999), p. 8.
295. E. Schmaiz,M. Sauer-Kunze, and L. Bergmann, Filtration, in Nonwoven Fabric, W. Albrecht, H. Fuchs and W. Kittelmann, eds., WILEY-VCH Verlag GmbH, Weinheim, Germany, 2003, pp. 557-570.
296. T. Komori and K. Makishima, Textil. Res. J. 49 (1979), p. 550.
297. S. Zhu, R.H. Pelton, and K. Collver, Chem. Eng. Sci. 50 (1995), p. 3557.
298. H.S. Kim and B. Pourdeyhimi, Inter. Nonwovens J. 9 (2000), p. 15.
299. B. Neckar and S. Ibrahim, Textil. Res. J. 73 (2003), p. 611.
300. X. Zeng, C. Vasseur, and F. Fayala, Appl. Math. Modelling 24 (2000), p. 969.
301. N. Lifshutz, Inter. Nonwoven J. 14 (2005), p. 18.
302. L. Rebenfeld, B. Miler, and I. Tyomkin, Pore Structure in Fibrous Networks Related to Absorption in Modern Textile Characterization Methods, M. Raseel, ed., Mercel Dekker, Newbury, UK, 1996, pp. 291-309.
303. BS3321. The equivalent pore size of fabrics (bubble pressure test), BS Handbook 11, 1974. London: BSI, 1969.
304. Porous Materials. (n.d.). Capillary Flow Porometer. Porous Materials, Inc., New York. Retrieved October 17, 2008, from http://www.pmiapp.com/products/ capillary flow porometer.html.
305. Product Bulletin on Porometer 4. (n.d.). Benelux Scientific, Belgium. Retrieved February 13, 2009, from www.porometer.com/porometer.htm.
306. Topas Product Bulletin. (n.d.). Topas GmbH. Retrieved February 13, 2009, from www.topasgmbh. de.
307. W. Hoeflinger, H. Rud, and G. Mauschitz, Separ. Purif. Tech. 58 (2007), p. 256.
308. J.R. Sanchez, J.M. Rodriguez, A. Alvaro, and A.M. Estevez, Filtrat. Separ. 34 (1997), p. 592.
309. J.I.T. Stenhouse, D.A. Japuntich, and B.Y.H. Liu, J. Aerosol Sci. 23(suppl. 1) (1992), p. 761.
310. A. Mukhopadhyay, I.C. Sharma, and S. Chaudhary, Ind. J. Fiber Textile Res. 25 (2000), p. 195.
311. R. Sims, Dust collection design: Incorporating safety, performance, and energy savings. Clyde materials handling incorporating MAC equipment, 2009. Retrieved September 8, 2009, from http://www.bulk-online.com/Forum/showthread. php?threadid=17921.
312. American Society for Testing ofMaterials (ASTM), Standard TestMethod for Determining the Initial Efficiency of Flat Sheet Filter Media in an Airflow Using Latex Spheres. Annual book of ASTM standard, Vol.14.02. ASTM F1215-89, American Society for Testing of Materials, Philadelphia, PA, 1989, pp. 1113-1121.
313. Verein Deutscher Ingenieure (VDI), VDI/DIN 3926, Part 1, Testing of cleanable filtermedia- standard test for the evaluation of cleanable filter media, VDI/DIN Manual Air Pollution Prevention, Vol.6. Germany: Verein Deutscher Ingenieure, 2004, Oct.
314. American Society for Testing ofMaterials (ASTM), Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media. Annual book of ASTM standard, Vol.11.07. ASTM designation: D 6830-6902 (reapproved 2008), American Society for Testing of Materials, Philadelphia, PA, 2008.
315. Japanese Industrial Standard (JIS). JIS Z 8909-8911 Testing Methods of Filter Media for Dust Collection. Japanese Industrial Standard, Englewood, CO, 2005.
316. National Standard of the People's Republic of China , GB 12625. Technical Requirements of Fabric and Bag for Bag Filter. National Standard of the People's Republic of China, Beijing, China, 1990.
317. International Organization of Standardization (ISO), Air Quality-Standard Test Method for Filtration Characterization of Cleanable Filter Media, ISO 11057, ISO, Geneva, 2008.
318. N. Mao, Y. Yao, and C. Kanaoka, Adv. Powder Tech. 17 (2006), p. 85.
319. J. Binnig, J. Meyer, and G. Kasper, Gefahrstoffe Reinhaltung der Luft 65 (2005), p. 163.
320. R. Friehmelt and S. Heidenreich, J. Aerosol Sci. 30 (1999), p. 1271.
321. J. Binnig, J. Meyer and G. Kasper, J. Aerosol Sci. 38 (2007), p. 325.
322. L. Mölter, M. Schmidt, and P. Kebler, Practice-oriented filter testing according to the new VDI guideline 3926, PALAS-R GmbH,March 2006. RetrievedMay 25, 2009, from http://www. environmental-expert.com/ resultEachArticle.aspx?cid=3121&codi=6372&idproducttype= 6&level=0.
323. PALAS particle technology. (n.d.). Retrieved June 26, 2009, from http://www.palas.de/ Produktlinien/E medien.htm, Palas GmbH.
324. PALAS particle technology. Practical filter testing with Palas ageing chamber, in Palas GmbH, Palas particular information brochure, No.1. PALAS, Germany, 2008.
325. Palas GmbH, Filtrat. Separ. 42(2) (2005), p. 32.
326. Test rig cleanable filter. (n.d.). VDI 3926-II AFC 130, Topas GmbH. Retrieved June 26, 2009, from http://www.topas-gmbh.de/ AFC en.htm.
327. FilTEq (n.d.). Filtration testing equipment & services, GmbH. Retrieved May 25, 2009, from http://www.filteq.de/.
328. P. Gang, Filtrat. Separ. (International Edition) 9 (2009), p. 17.
329. P. Tronville, Filtrat. Separ. 45 (2008), p. 28.