Nanoparticles in polymer nanocomposites for tribological applications

Progress in Nanoparticles Research

Volumn , Issue , 2008, Pages 219-244

  Carrión Vilches, Francisco J ^a   Bermúdez, Maria Dolores ^a   Sanes, José ^a  

^a TECHNICAL UNIVERSITY OF CARTAGENA   (Spain)

Author keywords

Epoxy resin; Friction coefficient; Nanocomposite; Nanofiller; Nanoparticles; Thermoplastics; Tribology; Wear

Indexed keywords

BLENDING; EPOXY RESINS; FRICTION; NANOCOMPOSITES; NANOPARTICLES; REINFORCED PLASTICS; THERMOPLASTICS; WEAR OF MATERIALS;

COMPREHENSIVE INFORMATION; FRICTION AND WEAR REDUCTIONS; FRICTION COEFFICIENTS; NANOFILLER; POLYMER NANOCOMPOSITE; THERMOPLASTIC MATRICES; TRIBOLOGICAL APPLICATIONS; TRIBOLOGICAL PROPERTIES;

TRIBOLOGY;

EID: 77951145149     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (68)

1. M. Kawasumi, M. Kohzaki, Y. Kojima, A. Osaka, O. Kamigaito, Process for producing composite material. 1989, US Patent 4, 810, 734.
2. 3 reinforced polyamide 6 composites. Materials Letters, 2006, 60(21-22): p. 2590-2593.
3. 2 particle-filled poly(phthalazine ether sulfone ketone) composites. Journal of Applied Polymer Science, 2004, 92(2): p. 906-914.
4. G.J. Xian, Z. Zhang, K. Friedrich, Tribological properties of micro- and nanoparticles-filled poly(etherimide) composites. Journal of Applied Polymer Science, 2006, 101(3): p. 1678-1686.
5. 2 particles, Wear. 2005, 258(1-4): p. 141-148.
6. B. Wetzel, F. Haupert, K. Friedrich, M.Q. Zhang, M.Z. Rong, Impact and wear resistance of polymer nanocomposites at low filler content. Polymer Engineering and Science, 2002, 42(9): p. 1919-1927.
7. L. Chang, Z. Zhang, L. Ye, K. Friedrich, Tribological properties of epoxy nanocomposites - III. Characteristics of transfer films. Wear, 2007, 262(5-6): p. 699-706.
8. M.Q. Zhang, M.Z. Rong, S.L. Yu, B. Wetzel, K. Friedrich, Effect of particle surface treatment on the tribological performance of epoxy based nanocomposites. Wear, 2002, 253(9-10): p. 1086-1093.
9. M.Z. Rong, M.Q. Zhang, H. Li, H. Zeng, B. Wetzel, K. Friedrich, Microstructure and tribological behavior of polymeric nanocomposites. Industrial Lubrication and Tribology, 2001, 53(2): p. 72-77.
10. E. Vassileva, K. Friedrich, Epoxy/alumina nanoparticle composites. II. Influence of silane coupling agent treatment on mechanical performance and wear resistance. Journal of Applied Polymer Science, 2006, 101(6): p. 4410-4417.
11. G. Shi, M.Q. Zhang, M.Z. Rong, B. Wetzel, K. Friedrich, Sliding wear behavior of epoxy containing nano-Al2O3 particles with different pretreatments. Wear, 2004, 256(11-12): p. 1072-1081.
12. B. Wetzel, F. Haupert, M.Q. Zhang, Epoxy nanocomposites with high mechanical and tribological performance. Composites Science and Technology, 2003, 63(14): p. 2055-2067.
13. Q.L. Ji, M.Q. Zhang, M.Z. Rong, B. Wetzel, K. Friedrich, Tribological properties of surface modified nano-alumina/epoxy composite, Journal of Materials Science. 2004, 39(21): p. 6487-6493.
14. M.Z. Rong, M.Q. Zhang, G. Shi, Q.L. Ji, B. Wetzel, K. Friedrich, Graft polymerization onto inorganic nanoparticles and its effect on tribological performance improvement of polymer composites. Tribology International, 2003, 36: p. 697-707.
15. M.Q. Zhang, M.Z. Rong, S.L. Yu, B. Wetzel, K. Friedrich, Improvement of tribological performance of epoxy by the addition of irradiation grafted nano-inorganic particles. Macromolecular Materials and Engineering, 2002, 287(2): p. 111-115.
16. J. Lu, M.Q. Zhang, M.Z. Rong, S.L. Yu, B. Wetzel, K. Friedrich, Thermal stability of frictional surface layer and wear debris of epoxy nanocomposites in relation to the mechanism of tribological performance improvement. Journal of Materials Science, 2004, 39(11): p. 3817-3820.
17. N.L. McCook, B. Boesl, D.L. Burris, W.G. Sawyer, Epoxy, ZnO, PTFE nanocomposite: friction and wear optimization. Tribology Letters, 2006, 22(3): p. 253-257.
18. C.Y. Zhang, M.Z. Rong, M.Q. Zhang, Tribological behaviours of epoxy composites filled with silicon carbide nanoparticles. Advanced Composites Letters, 2007, 16(3): p. 115-119.
19. Q.L. Ji, M.Q. Zhang, M.Z. Rong, B. Wetzel, K. Friedrich, Friction and wear of epoxy composites containing surface modified SiC nanoparticles. Tribology Letters, 2005, 20(2): p. 115-123.
20. 4 filled epoxy composites. Wear, 2003, 254(7-8): p. 784-796.
21. L. Rapoport, O. Nepomnyashchy, A. Verdyan, R. Popovitz-Biro, Y. Volovik, B. Ittah, R. Tenne, Polymer Nanocomposites with Fulleren-Solid Lubricant. Advanced Engineering Materials, 2004, 6(1-2): p. 44-48.
22. L. Rapoport, Y. Feldman, M. Homyonfer, H. Cohen, J. Sloan, J.L. Hutchison, R. Tenne, Inorganic fullerene-like material as additives to lubricants: structure-function relationship. Wear, 1999, 229: p. 975-982.
23. I.M. Hutchings, Friction and Wear of Engineering Materials. 1992: Butterworth-Heinemann Ltd., 280.
24. R. Bassani, G. Levita, M. Meozzi, G. Palla, Friction and wear of epoxy resin on inox steel: remarks on the influence of velocity, load and induced thermal state. Wear, 2001, 247(2): p. 125-132.
25. N.P. Suh: Delamination theory of Wear. Wear, 1973, 25(1): p. 111-124.
26. M. Avella, M.E. Errico, E. Martuscelli, Novel PMMA/CaCO3 nanocomposites abrasion resistant prepared by an in situ polymerization process. Nano Letters, 2001, 1(4): p. 213-217.
27. M. Garcia, M. de Rooij, L. Winnubst, W.E. van Zyl, H. Verweij, Friction and wear studies on nylon-6/SiO2 nanocomposites. Journal of Applied Polymer Science, 2004, 92(3): p. 1855-1862.
28. 2 composite coatings. Wear, 2007, 262(9-10): p. 1232-1238.
29. E. Petrovicova, R. Knight, L.S. Schadler, T.E. Twardowski, Nylon 11/silica nanocomposite coatings applied by the HVOF process. II. Mechanical and barrier properties. Journal of Applied Polymer Science, 2000, 78(13): p. 2272-2289.
30. F.J. Carrion, J. Sanes, M.D. Bermudez, Influence of ZnO nanoparticle filler on the properties and wear resistance of polycarbonate. Wear, 2007, 262(11-12): p. 1504-1510.
31. F.J. Carrion, J. Sanes, M.D. Bermudez, Effect of ionic liquid on the structure and tribological properties of polycarbonate-zinc oxide nanodispersion. Materials Letters, 2007, 61(23-24): p. 4531-4535.
32. P. Bhimaraj, D.L. Burris, J. Action, W.G. Sawyer, C.G. Toney, R.W. Siegel, L.S. Schadler, Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate composites. Wear, 2005, 258(9): p. 1437-1443.
33. Q.H. Wang, Q.J. Xue, W.M. Liu, J.M. Chen, The friction and wear characteristics of nanometer SiC and polytetrafluoroethylene filled polyetheretherketone. Wear, 2000, 243(1-2): p. 140-146.
34. N.L. McCook, M. A. Hamilton, D. L. Burris, W.G. Sawyer, Tribological results of PEEK nanocomposites in dry sliding against 440C in various gas environments. Wear, 2007, 262(11-12): p. 1511-1515.
35. Q.J. Xue, Q.H. Wang, Wear mechanisms of polyetheretherketone composites filled with various kinds of SiC. Wear, 1997, 213: p. 54-58.
36. 2 on the tribological behaviour of PEEK. Wear, 1996, 198(1-2): p. 216-219.
37. 4 filled PEEK. Wear, 1996, 196(1-2): p. 82-86.
38. Q.H. Wang, J.F. Xu, W.C. Shen, Q.J. Xue, The effect of nanometer SiC filler on the tribological behavior of PEEK. Wear, 1997, 209(1-2): p. 316-321.
39. 2 filled polyetheretherketone. Tribology International, 1997, 30(3): p. 193-197.
40. 2-filled polyetheretherketone. Journal of Applied Polymer Science, 1998, 69(1): p. 135-141.
41. Q.H. Wang, Q.J. Xue, W.M. Liu, J.M. Chen, Effect of nanometer SiC filler on the tribological behavior of PEEK under distilled water lubrication. Journal of Applied Polymer Science. 2000, 78(3): p. 609-614.
42. 4 filled poly(etheretherketone) under distilled water lubrication. Journal of Applied Polymer Science, 2001, 79(8): p. 1394-1400.
43. 2 nanoparticle filled-phthalazine ether sulfone/phthalazine ether ketone (50/50 mol %) copolymer composites. Journal of Applied Polymer Science, 2002, 85(10): p. 2136-2144.
44. X. Shao, Q.J. Xue, W.M. Liu, M.Y. Teng, H.H. Liu, X.Q. Tao, Tribological behavior of micrometer- and nanometer-Al2O3-particle-filled poly (phthalazine ether sulfone ketone) copolymer composites used as frictional materials. Journal of Applied Polymer Science, 2005, 95(5): p. 993-1001.
45. 3-polyimide nanocomposites. Polymer Testing, 2003, 22(8): p. 875-882.
46. L.G. Yu, S.R. Yang, H.T. Wang, Q.J. Xue, An investigation of the friction and wear behaviors of micrometer copper particle- and nanometer copper particle-filled polyoxymethylene composites. Journal of Applied Polymer Science, 2000, 77(11): p. 2404-2410.
47. J. Wang, X.G. Hu, M. Tian, R. Stengler, Study on mechanical and tribological property of nanometer ZrO2-filled polyoxymethylene composites. Polymer-Plastics Technology and Engineering, 2007, 46(5): p. 469-473.
48. T. Sugama, K. Gawlik, Nanoscale boehmite filler for corrosion- and wear-resistant polyphenylenesulfide coatings. Polymers and Polymer Composites, 2004, 12(3): p. 153-167.
49. M.H. Cho, S. Bahadur, Study of the tribological synergistic effects in nano CuO-filled and fiber-reinforced polyphenylene sulfide composites. Wear, 2005, 258(5-6): p. 835-845.
50. S. Bahadur, C. Sunkara, Effect of transfer film structure, composition and bonding on the tribological behavior of polyphenylene sulfide filled with nano particles of TiO2, ZnO, CuO and SiC. Wear, 2005, 258(9): p. 1411-1421.
51. C.J. Schwartz, S. Bahadur, Studies on the tribological behavior and transfer film-counterface bond strength for polyphenylene sulfide filled with nanoscale alumina particles. Wear, 2000, 237(2): p. 261-273.
52. W.G. Sawyer, K.D. Freudenberg, P. Bhimaraj, L.S. Schadler, A study on the friction and wear behavior of PTFE filled with alumina nanoparticles. Wear, 2003, 254(5-6): p. 573-580.
53. D.H. Xiang, K. Li, W. Shu, Z. Xu, On the tribological properties of PTFE filled with alumina nanoparticles and graphite. Journal of Reinforced Plastics and Composites, 2007, 26(3): p. 331-339.
54. J.Y. Lee, D.S. Lim, Tribological behavior of PTFE film with nanodiamond. Surface and Coatings Technology, 2004, 188-89: p. 534-538.
55. F. Li, K.A. Hu, J.L. Li, B.Y. Zhao, The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethylene. Wear, 2001, 249(10-11): p. 877-882.
56. D.L. Burris, W.G. Sawyer, Tribological Sensitivity of PTFE/Alumina Nanocomposites to a Range of Traditional Surface Finishes. Tribology Transactions, 2005, 48(2): p. 147-153.
57. D.L. Burris, W.G. Sawyer, Improved wear resistance in alumina-PTFE nanocomposites with irregular shaped nanoparticles. Wear, 2006, 260(7-8): p. 915-918.
58. L.V. Todorov, J.C. Viana, Characterization of PET nanocomposites produced by different melt-based production methods. Journal of Applied Polymer Science, 2007, 106(3): p. 1659-1669.
59. W.H. Ruan, Y.L. Mai, X.H. Wang, M.Z. Rong, M.Q. Zhang, Effects of processing conditions on properties of nano-SiO2/polypropylene composites fabricated by pre-drawing technique. Composites Science and Technology, 2007, 67(13): p. 2747-2756.
60. N. Fedullo, E. Sorlier, M. Sclavons, C. Bailly, J.M. Lefebvre, J. Devaux, Polymer-based nanocomposites: Overview, applications and perspectives. Progress in Organic Coatings, 2007, 58(2-3): p. 87-95.
61. N. Artzi, A. Tzur, M. Narkis, A. Siegmann, The effect of extrusion processing conditions on EVOH/clay nanocomposites at low organo-clay contents. Polymer Composites, 2005, 26(3): p. 343-351.
62. K. Wang, S. Liang, R.N. Du, Q. Zhang, Q. Fu, The interplay of thermodynamics and shear on the dispersion of polymer nanocomposite. Polymer, 2004, 45(23): p. 7953-7960.
63. Y.B. Zou, Y.C. Feng, L. Wang, X.B. Liu, Processing and properties of MWNT/HDPE composites. Carbon, 2004, 42(2): p. 271-277.
64. H.R. Dennis, D.L. Hunter, D. Chang, S. Kim, J.L. White, J.W. Cho, Nanocomposites: The importance of processing. Plastics Engineering. 2001, 57(1): p. 56.
65. H.R. Dennis, D.L. Hunter, D. Chang, S. Kim, J.L. White, J.W. Cho, D.R. Paul, Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites. Polymer, 2001, 42(23): p. 9513-9522.
66. J. Wang, M. Gu, B. Songhao, S. Ge, Investigation of the influence of MoS2 filler on the tribological properties of carbon fiber reinforced nylon 1010 composites. Wear, 2003, 225: p. 774-779.
67. D.L. Burris, B. Boesl, G.R. Bourne, W.G. Sawyer, Polymeric nanocomposites for tribological applications. Macromolecular Materials and Engineering, 2007, 292(4): p. 387-402.
68. M.Q. Zhang, M.Z. Rong, K. Friedrich, Wear resisting polymer nanocomposites: preparation and properties, in Polymer Nanocomposites, Y.W. Mai, Z.Z. Yu, Editors. 2006, Woodhead Publishing Limited and CRC Press: Cambridge, England. p. 594.