High molar mass silicone rubber reinforced with montmorillonite clay masterbatches: Morphology and mechanical properties

European Polymer Journal

Volumn 46, Issue 5, 2010, Pages 881-890

  Kaneko, Manuela L Q A ^a   Romero, Rafaelle Bonzanini ^a   Gonçalves, Maria do Carmo ^a   Yoshida, Inez V P ^a  

^a UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

Clay; Masterbatch; Nanocomposite; Silicone

Indexed keywords

CLAY AGGREGATES; ELONGATION AT BREAK; EXFOLIATED CLAY; MASTERBATCH; MATRIX; MONTMORILLONITE CLAY; MORPHOLOGY AND MECHANICAL PROPERTIES; RUBBER COMPOSITE; SCANNING AND TRANSMISSION ELECTRON MICROSCOPY; SILICONE RUBBER; TENSILE TESTS;

CLAY MINERALS; MECHANICAL PROPERTIES; MICROCHANNELS; MORPHOLOGY; NANOCOMPOSITES; RUBBER; SILICATE MINERALS; SILICONES; SURFACE ACTIVE AGENTS; TENSILE STRENGTH; TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

TELLURIC PROSPECTING;

EID: 77950858585     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2010.02.007     Document Type: Article

References (34)

1. Bin C., Lui J., Chen H., and Wu J. Chem Mater 16 (2004) 4864-4866
2. Alexander M., and Dubois P. Mat Sci Eng R 28 (2000) 1-63
3. Ray S.S., and Okamoto M. Prog Ploym Sci 28 (2003) 1539-1641
4. Pavlidou S., and Papaspyrides C.D. Prog Polym Sci 33 (2008) 1119-1198
5. Paul D.R., and Robeson L.M. Polymer 49 (2008) 3187-3204
6. Ma J., Yu Z., Kuan H., Dasari A., and Mai Y. Macromol Rapid Commun 26 (2005) 830-833
7. Hasegawa N., Okamoto H., Kato M., Usuki A., and Sato N. Polymer 44 (2003) 2933-2937
8. Ma J., Yu Z.Z., Zhnag Q.X., Xie X.L., Mai Y.W., and Luck I. Chem Mater 16 (2004) 757-759
9. Wang K., Chen L., Wu J., Toh M.L., He C., and Yee A.F. Macromolecules 38 (2005) 788-800
10. Kubies D., Scudla J., Puffr R., Sikora A., Baldrian J., Kovarova J.S., Slouf M., and Rypacek F. Eur Polym J 42 (2006) 888-899
11. Kurian M., Dasgupta A., Beyer F.L., and Galvin M.E. J Polym Sci Part B: Polym Phys 42 (2004) 4075-4083
12. LeBaron P.C., and Pinnavaia T.J. Chem Mater 13 (2001) 3760-3765
13. Wang S., Long C., Wang X., Li Q., and Qi Z. J Appl Polym Sci 69 (1998) 1557-1561
14. Zhang L.M., Jahns C., Hsiao B., and Chu B. J Colloid Interface Sci 266 (2003) 339-345
15. Schmidt D.F., Clément F., and Giannelis E. Adv Funct Mater 16 (2006) 417-425
16. Kong Q., Hu Y., Song L., and Wang Y. Polym Adv Technol 17 (2006) 463-467
17. Wang J., Chen Y., and Jin Q. High Perform Polym 18 (2006) 325-340
18. ASTM D412-98. Standard test method for vulcanized rubber and thermoplastic elastomers-tension, Annual book of ASTM standards, 1998.
19. Vaia R., and Giannelis E. Macromolecules 30 (1997) 7990-7999
20. Aranda P., and Hitzky E.R. Chem Mater 4 (1992) 1395-1403
21. Bujdák J., Hackett E., and Giannelis E.P. Chem Mater 12 (2000) 2168-2174
22. Parffit R.L., and Greenland D.J. Clay Miner 8 (1970) 305-315
23. Redondo S.U.A., Radovanovic E., Torriani I., and Yoshida I.V.P. Polymer 42 (2001) 1319-1327
24. Yoonessi M., Toghiani H., Dauloton T.L., Lin J.S., and Pittman C.U. Macromolecules 38 (2005) 818-831
25. Bafna A., Beaucage F., Mirabela F., and Mehta S. Polymer 44 (2003) 1103-1115
26. Koo C.M., Kim S.O., and Chung I.J. Macromolecules 36 (2003) 2748-2757
27. High Jr R, Higdon WT, Schmidt PW. J Chem Phys 1960;33:1656-1661.
28. Leach E.S.H., Hopkinson A., and Franklin K. Langmuir 21 (2005) 3821-3830
29. Kim E.S., Kim E.J., Shim J.H., and Yoon J. J Appl Polym Sci 110 (2008) 1263-1270
30. Yong M., Wu W., Zhang L., and Li Q. J Appl Polym Sci 109 (2008) 1925-1934
31. Kaneko M.L.Q.A., and Yoshida I.V.P. J Appl Polym Sci 108 (2008) 2587-2596
32. Vaia R.A., Jandt K.D., Kramer E.J., and Giannelis E.P. Macromolecules 28 (1995) 8080-8085
33. Morvan M., Espinat D., Lambard J., and Zemb T. Colloids Surf A 82 (1994) 193-203
34. Sharaf M.A., Kloczkowski A., and Mark J.E. Rubber Chem Technol 68 (1995) 601-608