Microstructures and properties of plasma sprayed FeAl/CeO 2 /ZrO 2 nano-composite coating

Applied Surface Science

Volumn 256, Issue 13, 2010, Pages 4176-4184

  Yin, Bin ^a,b   Liu, Guang ^a,b   Zhou, Huidi ^a   Chen, Jianmin ^a   Yan, Fengyuan ^a  

^a LANZHOU INSTITUTE OF CHEMICAL PHYSICS   (China)

^b UNIVERSITY OF CHINESE ACADEMY OF SCIENCES   (China)

Author keywords

Friction and wear; Intermetallic compound; Mechanical property; Nano composite coating; Plasma spraying

Indexed keywords

BINARY ALLOYS; CERIUM OXIDE; CHROMIUM ALLOYS; COMPOSITE COATINGS; FEEDSTOCKS; FRACTURE TOUGHNESS; FRICTION; INTERMETALLICS; MECHANICAL PROPERTIES; MICROSTRUCTURE; NANOCOMPOSITES; NANOPARTICLES; PLASMA JETS; POWDERS; SCANNING ELECTRON MICROSCOPY; SPECTROMETERS; SPRAYED COATINGS; TERNARY ALLOYS; TITANIUM ALLOYS; WEAR OF MATERIALS; WEAR RESISTANCE; ZIRCONIA;

1CR18NI9TI STAINLESS STEEL; ENERGY DISPERSIVE SPECTROMETERS; FIELD EMISSION SCANNING ELECTRON MICROSCOPES; FRICTION AND WEAR; FRICTION AND WEAR BEHAVIORS; MICROSTRUCTURE AND MECHANICAL PROPERTIES; MICROSTRUCTURES AND PROPERTIES; NANO-COMPOSITE COATING;

PLASMA SPRAYING;

EID: 77950516837     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2010.01.121     Document Type: Article

References (42)

1. Guilemany J.M., Lima C.R.C., Cinca N., and Miguel J.R. Studies of Fe-40Al coatings obtained by high velocity oxy-fuel. Surf. Coat. Technol. 201 (2006) 2072-2079
2. Wang H.T., Li C.J., Yang G.J., Li C.X., Zhang Q., and Li W.Y. Microstructural characterization of cold-sprayed nanostructured FeAl intermetallic compound coating and its ball-milled feedstock powders. J. Therm. Spray Technol. 16 (2007) 669-676
3. 3 reinforced-or atomized FeAl powders. Intermetallics 14 (2006) 715-721
4. 2 -modified HVOF sprayed FeAl coatings at 700 °C. Surf. Coat. Technol. 201 (2006) 3625-3632
5. Ji G., Grosdidier T., Liao H.L., Morniroli J.P., and Coddet C. Spray forming thick nanostructured and microstructured FeAl deposits. Intermetallics 13 (2005) 596-607
6. Wang Y., Wang Z., Yang Y., and Chen W. The effects of ceria on the mechanical properties and thermal shock resistance of thermal sprayed NiAl intermetallic coatings. Intermetallics 16 (2008) 682-688
7. 3 intermetallic composite coating. Vacuum 83 (2009) 146-152
8. Yang Y., and Baker I. The influence of vacancy concentration on the mechanical behavior of Fe-40Al. Intermetallics 6 (1998) 167-175
9. Baker I., Li X., Xiao H., Carleton R., and George E.P. The room temperature strengthening effect of boron as a function of aluminum concentration in FeAl. Intermetallics 6 (1998) 177-183
10. Krasnowski M., and Kulik T. Nanocrystalline FeAl intermetallic produced by mechanical alloying followed by hot-pressing consolidation. Intermetallics 15 (2007) 201-205
11. Muz-Morris M.A., Oca C.G., and Morris D.G. Microstructure and room temperature strength of Fe-40Al containing nanocrystalline oxide particles. Acta Mater. 51 (2003) 5187-5197
12. Schneibel J.H., and Deevi S.C. Processing and mechanical properties of iron aluminide composites containing oxide particles. Mater. Sci. Eng. A 364 (2004) 166-170
13. Schneibel J.H., Carmichael C.A., Specht E.D., and Subramanian R. Liquid-phase sintered iron aluminide-ceramic composites. Intermetallics 5 (1997) 61-67
14. Subramanian R., and Schneibel J.H. Intermetallic bonded WC-based cermets by pressureless melt infiltration. Intermetallics 5 (1997) 401-408
15. Subramanian R., and Schneibel J.H. The ductile-brittle size transition of iron aluminide ligaments in an FeAl/TiC composite. Acta Mater. 46 (1998) 4733-4741
16. 2 composite coatings by electrodeposition. Surf. Coat. Technol. 200 (2006) 5677-5681
17. 2 addition. Scripta Mater. 55 (2006) 1039-1042
18. 2 ) on the microstructures in laser melted layer. J. Mater. Sci. 35 (2000) 5389-5400
19. Wang K.L., Zhang Q.B., Sun M.L., Wei X.G., and Zhu Y.M. Microstructure and corrosion resistance of laser clad coatings with rare earth elements. Corros. Sci. 43 (2001) 255-267
20. 3 on corrosion resistance of laser clad ferrite-based alloy coatings. Corros. Sci. 48 (2006) 273-284
21. 2 doped CoCrW coatings deposited by supersonic plasma spraying. Chin. Sci. Bull. 52 (2007) 3292-3298
22. 2 on friction and wear characteristics of Fe-Ni-Cr alloy coatings. Tribol. Int. 39 (2006) 971-978
23. 2 -NiCr coatings. Appl. Surf. Sci. 253 (2007) 4377-4385
24. Zhang Z.Y., Lu X.C., Han B.L., and Luo J.B. Rare earth effect on microstructure, mechanical and tribological properties of CoCrW coatings. Mater. Sci. Eng. A 444 (2007) 92-98
25. Zhang Z.Y., Lu X.C., Han B.L., and Luo J.B. Rare earth effect on the microstructure and wear resistance of Ni-based coatings. Mater. Sci. Eng. A 454-455 (2007) 194-202
26. 2 on the erosion and abrasive wear of thermal sprayed FeAl intermetallic alloy coatings. Wear 261 (2006) 1201-1207
27. Wang Y., Yang Y., and Yan M.F. Microstructures, hardness and erosion behavior of thermal sprayed and heat treated NiAl coatings with different ceria. Wear 263 (2007) 371-378
28. Mignone A., Frangini S., La Barbera A., and Tassa O. High temperature corrosion of b2 iron aluminides. Corros. Sci. 40 (1998) 1331-1347
29. Lima R.S., and Marple B.R. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review. J. Therm. Spray Technol. 16 (2007) 40-63
30. 2 -SiC composite prepared by reactive sintering of powders. Mater. Sci. Eng. A 251 (1998) 262-268
31. 2 . J. Therm. Spray Technol. 14 (2005) 397-404
32. Liao H., Normand B., and Coddet C. Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet coatings. Surf. Coat. Technol. 124 (2000) 235-242
33. Tjong S.C., and Chen H. Nanocrystalline materials and coatings. Mater. Sci. Eng. R 45 (2004) 1-88
34. Senderowski C., and Bojar Z. Gas detonation spray forming of Fe-Al coatings in the presence of interlayer. Surf. Coat. Technol. 202 (2000) 3538-3548
35. Wang K.L., Zhu Y.M., Zhang Q.B., and Sun M.L. Effect of rare earth cerium on the microstructure and corrosion resistance of laser cladded nickel-base alloy coatings. J. Mater. Process. Technol. 63 (1997) 563-567
36. Guilemany J.M., Cinca N., Dosta S., and Lima C.R.C. High-temperature oxidation of Fe40Al coatings obtained by HVOF thermal spray. Intermetallics 15 (2007) 1384-1394
37. Lima R.S., Kucuk A., and Berndt C.C. Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia. Mater. Sci. Eng. A 327 (2002) 224-232
38. Yang J., La P.Q., Liu W.M., and Xue Q.J. Tribological properties of FeAl intermetallics under dry sliding. Wear 257 (2004) 104-109
39. Liang B., and Ding C.X. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying. Surf. Coat. Technol. 197 (2005) 185-192
40. Zhu Y.C., Yukimura K., Ding C.X., and Zhang P.Y. Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying. Thin Solid Films 388 (2001) 277-282
41. Jia K., and Fischer T.E. Sliding wear of conventional and nanostructured cemented carbides. Wear 203-204 (1997) 310-318
42. Hawthorne H.M., Arsenault B., Immarigeon J.P., Legoux J.G., and Parameswaran V.R. Comparison of slurry and dry erosion behaviour of some HVOF thermal sprayed coatings. Wear 225-229 (1999) 825-834