A comparative study on the properties of GLARE laminates cured by autoclave and autoclave consolidation followed by oven postcuring

International Journal of Advanced Manufacturing Technology

Volumn 49, Issue 5-8, 2010, Pages 605-613

  Park, Sang Yoon ^a   Choi, Won Jong ^a   Choi, Heung Soap ^b  

^a Hankuk Aviation University   (South Korea)

^b R and D Center   (South Korea)

Author keywords

Autoclave; Cure behavior; GLARE; Thermal analysis

Indexed keywords

AUTOCLAVE CURE; AUTOCLAVE CURING; AUTOCLAVE PROCESSING; COMPARATIVE STUDIES; CURE BEHAVIOR; CURE CYCLE; DIELECTRIC ANALYZERS; GLARE LAMINATES; INTERLAMINAR SHEAR STRENGTH; INTERMEDIATE SWITCH; OVEN CURING; POST-CURING; REINFORCED EPOXY; THERMAL ANALYSIS; VOID CONTENTS;

BOILERS; CURING; DIFFERENTIAL SCANNING CALORIMETRY; GLARE; LAMINATES; OVENS; PRESSURE VESSELS; SHEAR STRENGTH; STOVES; THERMOANALYSIS;

AUTOCLAVES;

EID: 77950500269     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-009-2408-x     Document Type: Article

References (31)

1. SY Kim WJ Choi SY Park 2007 Spring-back characteristics of fiber metal laminate (GLARE) in brake forming process Int J Adv Manuf Tech 32 5-6 445 451 10.1007/s00170-005-0355-8 (Pubitemid 46375256)
2. TJ de Vries A Vlot F Hashagen 1999 Delamination behavior of spliced fiber metal laminates-part 1: experimental results Compos Struct 46 2 131 145 10.1016/S0263-8223(99)00049-5 (Pubitemid 29485742)
3. EC Botelho RS Almeida LC Pardini MC Rezende 2007 Elastic properties of hygrothermally conditioned glare laminate Int J Eng Sci 45 1 163 172 10.1016/j.ijengsci.2006.08.017 (Pubitemid 46427824)
4. RM Frizzell CT McCarthy MA McCarthy 2008 An experimental investigation into the progression of damage in pin-loaded fibre metal laminates Compos Part B 39 6 907 925 10.1016/j.compositesb.2008.01.007
5. EM Castrodeza MRWS Abdala FL Bastian 2006 Crack resistance curves of GLARE laminates by elastic compliance Eng Fract Mech 73 16 2292 2303 10.1016/j.engfracmech.2006.05.008 (Pubitemid 44227775)
6. G Marsh 2006 Duelling with composites Reinforc Plast 50 6 18 23 10.1016/S0034-3617(06)71040-2 2288104 (Pubitemid 43923473)
7. EC Botelho RS Almeida LC Pardini MC Rezende 2006 A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures Mater Res 9 3 247 256
8. D Abraham S Matthews R McIlhagger 1998 A comparison of physical properties of glass fibre epoxy composites produced by wet lay-up with autoclave consolidation and resin transfer moulding Compos Part A 29 7 795 801 10.1016/S1359-835X(98)00055-4
9. L Liu BM Zhang DF Wang ZJ Wu 2006 Effects of cure cycles on void content and mechanical properties of composite laminates Compos Struct 73 3 303 309 10.1016/j.compstruct.2005.02.001
10. CS Lopes JJC Remmers Z Gurdal 2008 Influence of porosity on the interlaminar shear strength of fibre-metal laminates Key Eng Mat 383 35 52 10.4028/www.scientific.net/KEM.383.35
11. SR White YK Kim 1996 Staged curing of composite materials Compos Part A 27 3 219 227 10.1016/1359-835X(95)00023-U (Pubitemid 126350905)
12. C Nightingale RJ Day 2002 Flexural and interlaminar shear strength properties of carbon fibre/epoxy composites cured thermally and with microwave radiation Compos Part A 33 7 1021 1030 10.1016/S1359-835X(02)00031-3 (Pubitemid 34862497)
13. EC Botelho LC Pardini MC Rezende 2005 Hygrothermal effects on damping behavior of metal/glass fiber/epoxy hybrid composites Mater Sci Eng 399 1-2 190 198
14. GW Critchlow DM Brewis 1996 Review of surface pretreatments for aluminium alloys Int J Adhes Adhes 16 4 255 275 10.1016/S0143-7496(96)00014-0 (Pubitemid 126366247)
15. GW Critchlow KA Yendall D Bahrani A Quinn F Andrews 2006 Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys Int J Adhes Adhes 26 6 416 453 10.1016/j.ijadhadh.2005.07.001
16. MD Wakeman TA Cain CD Rudd R Brooks AC Long 1998 Compression moulding of glass and polypropyledne composites for optimised macro- and micro-mechanical properties-1 commingled glass and polypropylene Compos Sci Technol 58 12 1879 1898 10.1016/S0266-3538(98)00011-6 (Pubitemid 29137243)
17. US Department of Defense Handbook (2002) Military handbook-MIL-HDBK-17- 1F: composite materials handbook, vol 1. Polymer matrix composites guidelines for characterization of structural materials
18. American Society for Testing and Materials, Standard D 3171 (1999) Standard test method for fiber content of resin-matrix composites by matrix digestion. Annual Book of ASTM Standards, West Conshohocken, PA
19. Beumler T (2004) Flying Glare®, a contribution to aircraft certification issues on strengths properties in non-damaged and fatigue damaged GLARE® structures. PhD Thesis, Delft University of Technology, Netherlands
20. R Alderliesten C Rans R Benedictus 2008 The applicability of magnesium based fibre metal laminates in aerospace structures Compos Sci Tech 68 14 2983 2993 10.1016/j.compscitech.2008.06.017
21. American Society for Testing and Materials, Standard E 1269 (2005) Standard test method for determining specific heat capacity by differential scanning calorimetry. Annual Book of ASTM Standards, West Conshohocken
22. M Xie Z Zhang Y Gu M Li Y Su 2009 A new method to characterize the cure state of epoxy prepreg by dynamic mechanical analysis Thermochim Acta 487 1-2 8 17 10.1016/j.tca.2009.01.001
23. FYC Boey W Qiang 2000 Experimental modeling of the cure kinetics of an epoxy-hexaanhydro-4-methylphthalicanhydride (MHHPA) system Polymer 41 6 2081 2094 10.1016/S0032-3861(99)00409-7 (Pubitemid 30025570)
24. GR Sherwin 1999 Non-autoclave processing of advanced composite repairs Int J Adhes Adhes 19 2-3 155 159 10.1016/S0143-7496(98)00030-X
25. A McIlhagger D Brown B Hill 2000 The development of a dielectric system for the on-line cure monitoring of the resin transfer moulding process Compos Part A 31 12 1373 1381 10.1016/S1359-835X(00)00050-6 (Pubitemid 32022507)
26. M Ungarish R Joseph J Vittoser S Kenig 1990 Cure cycle optimization of composites by dielectric measurements Composite 21 6 466 560 10.1016/0010-4361(90)90420-2
27. American Society for Testing and Materials, Standard D 2344 (2000) Standard test method for short-beam strength of polymer matrix composite materials and their laminates. Annual Book of ASTM Standards, West Conshohocken
28. Tomblin J, Ng Y, Bowman K, Hooper E, Smyth T, Showers D (2001) Material qualification methodology for epoxy-based prepreg composite material systems, DOT/FAA/AR-00/47. U.S. Department of Transportation Federal Aviation Administration, http://www.mil17.org
29. LW Davies RJ Day D Bond A Nesbitt J Ellis E Gardon 2007 Effect of cure cycle heat transfer rates on the physical and mechanical properties of an epoxy matrix composite Compos Sci Tech 67 9 1892 1899 10.1016/j.compscitech.2006.10. 014 (Pubitemid 46444627)
30. Lopes CS, Remmers JJC, Gürdal Z (2006) Influence of porosity on the interlaminar shear strength of fibre-metal laminates. In: Proceedings of the 47th AIAA/ASME/ASCE/AHS/ASC S.S.D.M. conference, Newport, Rhode Island
31. Park SY, Choi WJ, Choi HS (2010) The effects of void contents on the long-term hygrothermal behaviors of glass/epoxy and GLARE laminates. Compos Struct 92(1):18-24