A high performance solid oxide fuel cells operating at intermediate temperature with a modified interface between cathode and electrolyte

Journal of the European Ceramic Society

Volumn 30, Issue 8, 2010, Pages 1803-1808

  Fan, Baoan ^a   Yan, Jiabao ^a   Shi, Wenping ^b  

^a WUHAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b RESEARCH INSTITUTE OF CHEMICAL DEFENSE   (China)

Author keywords

Bismuth oxide; Electrical properties; Interface; Sintering; Solid oxide fuel cells

Indexed keywords

BISMUTH OXIDES; CATHODE SURFACE; CELL PERFORMANCE; CONTACT AREAS; DENSE FILMS; DENSE LAYER; ELECTRICAL PROPERTIES; ELECTRICAL PROPERTY; EUTECTIC LIQUID; INTERFACE; INTERMEDIATE TEMPERATURES; ION TRANSFER; LSCF FILMS; MODIFIED INTERFACES; SEM;

BISMUTH; ELECTRIC PROPERTIES; EUTECTICS; LIQUIDS; SINTERING; SOLID OXIDE FUEL CELLS (SOFC); YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

PHASE INTERFACES;

EID: 77950371693     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2010.01.035     Document Type: Article

References (19)

1. Liu Y., Zha S., Liu M. Nanocomposite electrodes fabricated by a particle-solution spraying process for low-temperature SOFCs. Chem Mater 2004, 16:3502-3506.
2. Haanappel V.A.C., Mertens J., Rutenbeck D., Tropartz C., Herzhof W., Sebold D., et al. Optimisation of processing and microstructural parameters of LSM cathodes to improve the electrochemical performance of anode-supported SOFCs. J Power Sources 2005, 141:216-226.
3. Leng Y.J., Chan S.H., Jiang S.P., Khor K.A. Low-temperature SOFC with thin film GDC electrolyte prepared in situ by solid-state reaction. Solid State Ionics 2004, 170:9-15.
4. Sprio S., Guicciardi S., Bellosi A., Pezzotti G. Yttria-stabilized zirconia films grown by radiofrequency magnetron sputtering: structure, properties and residual stresses. Surf Coat Technol 2006, 200:4579-4585.
5. Zhang Y., Gao J., Peng D., Meng G., Liu X. Dip-coating thin yttria-stabilized zirconia films for solid oxide fuel cell applications. Ceram Int 2004, 30:1049-1053.
6. 3 electrolyte: the role of a rare-earth oxide buffer. J Alloy Compd 2000, 303-304:454-464.
7. 3 electrolyte film. J Power Sources 2002, 106:142-145.
8. Matsui T., Inaba M., Mineshige A., Ogumi Z. Electrochemical properties of ceria-based oxides for use in intermediate-temperature SOFCs. Solid State Ionics 2005, 176:647-654.
9. Xu X., Xia C., Xiao G., Peng D. Fabrication and performance of functionally graded cathodes for IT-SOFCs based on doped ceria electrolytes. Solid State Ionics 2005, 176:1513-1520.
10. Hwang H.J., Moon J.W., Lee S., Lee E.A. Electrochemical performance of LSCF-based composite cathodes for intermediate temperature SOFCs. J Power Sources 2005, 145:243-248.
11. Mai A., Haanappel V.A.C., Uhlenbruck S., Tietz F., Stöver D. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells. Part I. Variation of composition. Solid State Ionics 2005, 176:1341-1350.
12. 3 cathodes for low-temperature SOFCs. Solid State Ionics 2002, 149:11-19.
13. Wang F.H., Guo R.S., Wei Q.T., Zhou Y., Li H.L., Li S.L. Preparation and properties of Ni/YSZ anode by coating precipitation method. Mater Lett 2004, 58:3079-3083.
14. Lee C.H., Lee H.Y., Seung M. Microstructure and anodic properties of Ni/YSZ cermets in solid oxide fuel cells. Solid State Ionics 1997, 98:39-48.
15. 2 and GDC-Ni anodes for low-temperature SOFCs. Solid State Ionics 2002, 152-153:423-430.
16. Ji Y., Liu J., He T., Cong L., Wang J., Su W. Single intermedium-temperature SOFC prepared by glycine-nitrate process. J Alloy Compd 2003, 353:257-262.
17. Fan B., Liu X. A-deficit LSCF for intermediate temperature solid oxide fuel cells [J]. Solid State Ionics 2009, 180:973-977.
18. Sammes N.M., Tompsett G.A., Näfe H., Aldinger F. Bismuth based oxide electrolytes-structure and ionic conductivity. J Eur Ceram Soc 1999, 19:1801-1826.
19. 3-x (LSCF) double layer cathodes on gadolinium-doped cerium oxide (CGO) electrolytes. II. Role of oxygen exchange and diffusion. Solid State Ionics 1998, 106:255-261.