Microstructure and mechanical properties of crystalline particulates dispersed Ni-based metallic glassy composites fabricated by spark plasma sintering

Intermetallics

Volumn 18, Issue 5, 2010, Pages 851-858

  Xie, Guoqiang ^a   Louzguine Luzgin, Dmitri V ^a,b   Kimura, Hisamichi ^a   Inoue, Akihisa ^a,b  

^a TOHOKU UNIVERSITY   (Japan)

^b TOHOKU UNIVERSITY   (Japan)

Author keywords

A. Composites; B. Glasses, metallic; C. Powder metallurgy; D. Microstructure

Indexed keywords

A. COMPOSITES; B. GLASSES, METALLIC; BULK GLASSY ALLOY; DISPERSED NI; EFFECT OF ADDITION; GLASSES , METALLIC; GLASSY ALLOY POWDER; LARGE SIZES; MICROSTRUCTURE AND MECHANICAL PROPERTIES; MIXED POWDER; SIC PARTICULATES; STRUCTURAL INHOMOGENEITIES; ULTRAHIGH STRENGTH;

ALUMINUM POWDER METALLURGY; CRYSTALLINE MATERIALS; ELECTRIC SPARKS; FABRICATION; GLASS; GRANULAR MATERIALS; METALLIC GLASS; METALLURGY; MICROSTRUCTURE; PLASTICITY; POWDER METALS; SILICON CARBIDE; SPARK PLASMA SINTERING;

MECHANICAL PROPERTIES;

EID: 77950020220     PISSN: 09669795     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.intermet.2009.12.023     Document Type: Article

References (45)

1. Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater 48 (2000) 279-306
2. Johnson W.L. Bulk glass-forming metallic alloys: science and technology. MRS Bull 24 10 (1999) 42-56
3. Inoue A., and Nishiyama N. New bulk metallic glasses for applications as magnetic-sensing, chemical, and structural materials. MRS Bull 32 (2007) 651-658
4. Greer A.L. Metallic glasses. Science 267 (1995) 1947-1953
5. Bruck H.A., Rosakis A.J., and Johnson W.L. The dynamic compressive behavior of beryllium bearing bulk metallic glasses. J Mater Res 11 (1996) 503-511
6. Xie G.Q., Louzguine-Luzgin D.V., Kimura H., Inoue A., and Wakai F. Large-size ultrahigh strength Ni-based bulk metallic glassy matrix composites with enhanced ductility fabricated by spark plasma sintering. Appl Phys Lett 92 (2008) 121907
7. Xie G.Q., Louzguine-Luzgin D.V., Wakai F., Kimura H., and Inoue A. Microstructure and properties of ceramic particulate reinforced metallic glassy matrix composites fabricated by spark plasma sintering. Mater Sci Eng B 148 (2008) 77-81
8. 2 particles by spark plasma sintering process. Mater Trans 48 (2007) 158-162
9. Lewandowski J.J., Shazly M., and Shamimi A. Intrinsic and extrinsic toughening of metallic glasses. Scripta Mater 54 (2006) 337-341
10. 10 glass containing μm-ZrC particle reinforcements. Scripta Mater 51 (2004) 577-581
11. Eckert J., Seidel M., Kübler A., Klement U., and Schultz L. Oxide dispersion strengthened mechanically alloyed amorphous Zr-Al-Cu-Ni composites. Scripta Mater 38 (1998) 595-602
12. Choi-Yim H., and Johnson W.L. Bulk metallic glass matrix composites. Appl Phys Lett 71 (1997) 3808
13. Fu H.M., Wang H., Zhang H.F., and Hu Z.Q. In situ TiB-reinforced Cu-based bulk metallic glass composites. Scripta Mater 54 (2006) 1961-1966
14. Hays C.C., Kim C.P., and Johnson W.L. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Phys Rev Lett 84 (2000) 2901-2904
15. Louzguine-Luzgin D.V., and Inoue A. Nano-devitrification of glassy alloys. J Nanosci Nanotech 5 (2005) 999-1014
16. Xie G.Q., Ohashi O., Yoshioka T., Song M., Mitsuishi K., Yasuda H., et al. Effect of interface behavior between particles on properties of pure Al powder compacts by spark plasma sintering. Mater Trans 42 (2001) 1846-1849
17. Xie G.Q., Ohashi O., Yamaguchi N., and Wang A. Effect of surface oxide films on the properties of pulse electric-current sintered metal powders. Metall Mater Trans A 34 (2003) 2655-2661
18. Omori M. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS). Mater Sci Eng A 287 (2000) 183-188
19. Xie G.Q., Zhang W., Louzguine-Luzgin D.V., Kimura H., and Inoue A. Fabrication of porous Zr-Cu-Al-Ni bulk metallic glass by spark plasma sintering process. Scripta Mater 55 (2006) 687-690
20. Mamedov V. Spark plasma sintering as advanced PM sintering method. Powder Metall 45 (2002) 322-328
21. Tokita M. Development of large-size ceramic/metal bulk FGM fabricated by spark plasma sintering. Mater Sci Forum 308-311 (1999) 83-88
22. 18 bulk amorphous alloy powders. Mater Sci Eng A 402 (2005) 228-233
23. Kim C.K., Lee S., Shin S.Y., and Kim D.H. Microstructure and mechanical properties of Cu-base amorphous alloy matrix composites consolidated by spark plasma sintering. Mater Sci Eng A 449-451 (2007) 924-928
24. Shen B.L., and Inoue A. Fabrication of large-size Fe-based glassy cores with good soft magnetic properties by spark plasma sintering. J Mater Res 18 (2003) 2115-2121
25. Ishihara S., Zhang W., Kimura H., Omori M., and Inoue A. Consolidation of Fe-Co-Nd-Dy-B glassy powders by spark-plasma sintering and magnetic properties of the consolidated alloys. Mater Trans 44 (2003) 138-143
26. 7.5 bulk metallic glass obtained by spark plasma sintering of gas atomized powders. Appl Phys Lett 90 (2007) 241902
27. Xie G.Q., Ohashi O., Song M., Furuya K., and Noda T. Behavior of oxide film at the interface between particles in sintered Al powders by pulse electric-current sintering. Metall Mater Trans A 34 (2003) 699-703
28. Louzguine-Luzgin D.V., Shimada T., and Inoue A. Ni-based bulk glassy alloys with large supercooled liquid region exceeding 90 K. Intermetallics 13 (2005) 1166-1171
29. Yanagisawa O., Hatayama T., and Matsugi K. Recent research on spark sintering process. Materia Japan 33 (1994) 1489-1496
30. Yamazaki K., Risbud S.H., Aoyama H., and Shoda K.P.A.S. (Plasma activated sintering): transient sintering process control for rapid consolidation of powders. J Mater Process Technol 56 (1996) 955-965
31. Xie G.Q., Ohashi O., Yamaguchi N., Song M., Mitsuishi K., Furuya K., et al. Behavior of oxide film at interface between particles of Al-Mg alloy powder compacts prepared by pulse electric-current sintering. Jpn J Appl Phys 42 (2003) 4725-4728
32. Xie G.Q., Ohashi O., Sato T., Yamaguchi N., Song M., Mitsuishi K., et al. Effect of Mg on the sintering of Al-Mg alloy powders by pulse electric-current sintering process. Mater Trans 45 (2004) 904-909
33. Xie G.Q., Ohashi O., Yamaguchi N., Song M., Mitsuishi K., Furuya K., et al. Reduction of surface oxide films in Al-Mg alloy powders by pulse electric current sintering. J Mater Res 19 (2004) 815-819
34. Munir Z.A., Anselmi-Tamburini U., and Ohyanagi M. The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method. J Mater Sci 41 (2006) 763-777
35. Cincotti A., Locci A.M., Orrù R., and Cao G. Modeling of SPS apparatus: temperature, current and strain distribution with no powders. AIChE J 53 (2007) 703-719
36. 30 bulk metallic glasses. Scripta Mater 45 (2001) 127-132
37. Yang B., Liaw P.K., Wang G., Morrison M., Liu C.T., Buchanan R.A., et al. In-situ thermographic observation of mechanical damage in bulk-metallic glasses during fatigue and tensile experiments. Intermetallics 12 (2004) 1265-1274
38. Lewandowski J.J., and Greer A.L. Temperature rise at shear bands in metallic glasses. Nature Mater 5 (2006) 15-18
39. Fan C., Li H., Kecskes L.J., Tao K., Choo H., Liew P.K., et al. Mechanical behavior of bulk amorphous alloys reinforced by ductile particles at cryogenic temperatures. Phys Rev Lett 96 (2006) 145506
40. 30 bulk glass containing ZrC particles. Scripta Mater 43 (2000) 503-507
41. 12.6 bulk metallic glass composites. Acta Mater 47 (1999) 2455-2462
42. 3 metallic glass matrix composites containing brass fibers synthesized by warm extrusion of powders. Appl Phys Lett 83 (2003) 2312
43. 10 bulk metallic glass composites. Scr Mater 49 (2003) 843-848
44. Inoue A., Zhang W., Tsurui T., Yavari A.R., and Greer A.L. Unusual room-temperature compressive plasticity in nanocrystal-toughened bulk copper-zirconium glass. Phil Mag Lett 85 (2005) 221-229
45. Inoue A. Bulk glassy and nonequilibrium crystalline alloys by stabilization of supercooled liquid: fabrication, functional properties and applications (part 2). Proc Japan Acad Ser B 81 (2005) 172-188