Design optimisation of flank wear and surface roughness for CBN-TiN tools during dry hard turning of hot work die steel

International Journal of Machining and Machinability of Materials

Volumn 7, Issue 1-2, 2010, Pages 129-147

  Dureja, J S ^a,d   Gupta, V K ^a   Sharma, Vishal S ^b   Dogra, Manu ^c  

^a PUNJABI UNIVERSITY   (India)

^b DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^c PANJAB UNIVERSITY   (India)

^d ISTE   (India)

Author keywords

BBD; Box Behnken design; CBN TiN tool; Flank wear (VB); Response surface methodology; RSM; Surface roughness (Ra)

Indexed keywords

ADHESIVES; CUTTING TOOLS; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTIES; TITANIUM NITRIDE; WEAR OF MATERIALS;

BOX-BEHNKEN DESIGN; BOXBEHNKEN DESIGN (BBD); ENERGY DISPERSIVE ANALYSIS; FLANK WEAR; MACHINING PARAMETERS; MODELLING AND OPTIMISATION; RESPONSE SURFACE METHODOLOGY; SURFACE ROUGHNESS (RA);

SURFACE ROUGHNESS;

EID: 77949785066     PISSN: 17485711     EISSN: 1748572X     Source Type: Journal    
DOI: 10.1504/IJMMM.2010.029850     Document Type: Article

References (39)

1. Aggarwal, A., Singh, H., Kumar, P. and Singh, M. (2003) 'Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function', Journal of Material Processing Technology, Vol. 205, pp.42-50.
2. Astakhov, V.P (2004) 'An application of the random balance method in conjunction with the Plackett-Burman screening design in metal cutting tests', Journal of Testing and Evaluation, Vol. 32, pp.32-39.
3. Astakhov, V.P. (1998) Metal Cutting Mechanics, CRC Press, Boca Raton, FL.
4. Astakhov, V.P., Galitsky, V.V. (2005) 'Tool life testing in gundrilling: an application of the group method of data handling (GMDH)', International of Journal of Machine Tools and Manufacture, Vol. 45, pp.509-517.
5. Astakhov, V.P., Al-Ata, M. and Osman, M.O.M (1997a) 'Statistical design of experiments in metal cutting-Part 2: application', Journal of Testing and Evaluation, Vol. 25, pp.328-336.
6. Astakhov, V.P., Osman, M.O.M. and Al-Ata, M. (1997b) 'Statistical design of experiments in metal cutting-part 1: methodology', Journal of Testing and Evaluation, Vol. 25, pp.322-327.
7. Benga, G.C. and Abrao, A.M. (2003) 'Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools', Journal of Material Processing Technology, pp.143-144, 237-241.
8. Box, G.E.P. and Behnken, D.W. (1960) 'Some new three level designs for the study of quantitative variables', Techno Metrics, Vol. 2, pp.455-475.
9. Box, G.E.P., Hunter, W.G. and Hunter, J.S. (1976) 'Statistics for experimenters: an introduction to design', Data Analysis and Model Building, John Wiley & Sons, New York.
10. Bary, J. and Bryne, G. (2000) 'Cutting tool wear in the machining of hardened steels-Part II: cubic boron nitride cutting tool wear', Wear, Vol. 247, pp.152-160.
11. Bary, J. and Bryne, G. (2001) 'Cutting tool wear in the machining of hardened steels - Part I: alumina/TiC cutting tool wear', Wear, Vol. 247, No. 2, pp.139-151.
12. Chou, Y.K., Evans, C.J. and Barash, M.M. (2002) 'Experimental investigation on CBN turning of hardened AISI 52100 steel', Journal of Material Processing Technology, Vol. 124, pp.274-283.
13. Coromant, S. (2008) Main catalogue, available at www.coromant.sandvik. com/.acess.
14. Davim, J.P. (2001) 'A note on the determination of optimal cutting conditions on the Surface roughness obtained in turning using design experiments', Journal of Material Processing Technology 1, Vol. 116, Nos. 2/3, pp.305-308.
15. Diniz, A.E. and de Olivera, A.J. (2007) 'Hard turning of interrupted surface using CBN tools', Journal of Material Processing Technology, Vol. 195, pp.275-281.
16. Hodgson, T., Trendler, P. and Ravignani, G. (1981) 'Turning hardened tool steels with cubic boron nitride inserts', Annals of CIRP, Vol. 30, No. 1, pp.63-66.
17. Horng, J-T., Liu, N-M. and Chiang, K-T. (2008) 'Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology', Journal of Material Processing Technology, Vol. 208, pp.532-541.
18. Huang Yong, S. and Liang, Y. (2004) 'Modelling of CBN tool flank wear progression in finish hard turning', Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp.98-106.
19. Jiang, W., More, A.S., Brown, W.D. and Malshe, A.P. (2006) 'A cBN-TiN composite coating for carbide inserts: coating characterization and its application for finish hard turning', Journal of Surface Coatings & Technology, Vol. 201, pp.2443-2449.
20. Kansal, H.K., Singh, S. and Kumar, P. (2005) 'Parametric optimization of powder mixed electrical discharge machining by response surface methodology', Journal of Material Processing Technology, Vol. 169, pp.427-436.
21. Klocke, F. and Frank, P. (2006) 'Simulation of tool wear in hard turning', 9th CIRP International Workshop on Modelling of Machining Operations, 11-12 May 2006, Bled, Slovenia.
22. Komanduri, R. and Brown, R.H. (1981) 'Trans. ASME', J. Eng. Ind., Vol. 103, pp.33-51.
23. Konig, W., Komanduri, R., Teonshoff, H. and Ackershott, G. (1984) 'Machining of hard materials', Annals of CIRP, Vol. 33, No. 2, pp.417-428.
24. Kopac, J., Bahor, M. and Sokovi, C.M. (2002) 'Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel work pieces', International of Machine Tools and Manufacture, Vol. 42, No. 6, pp.707-716.
25. Lin, H.M., Liao, Y.S. and Wei, C.C. (2008) 'Wear behaviour in turning high hardness alloy steel by CBN tool', Wear, Vol. 264, pp.679-684.
26. Montgomery, D.C. (2001) Design and Analysis of Experiments, John Wiley & Sons, New York.
27. More, A.S., Jiang, W., Brown, W.D. and Malshe, A.P. (2006) 'Tool wear and machining performance of CBN-TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel', Journal of Material Processing Technology, Vol. 180, pp.253-262.
28. Myers, R.H. and Montgomery, D.C. (1995) Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley & Sons, New York.
29. Narutaki, N. and Yamane, Y. (1979) 'Tool wear and cutting temperature of CBN tools in machining of hardened steels', Annals of CIRP, Vol. 28, No. 1, pp.23-28.
30. Oktem, H., Erzurmlu, T. and Kurtaran, H. (2005) 'Application of response surface methodology in the optimization of cutting conditions for surface roughness', Journal of Material Processing Technology, Vol. 170, pp.11-16.
31. Ozel, T., Hsu, T-K. and Zeren Erol, Y. (2005) 'Effect of cutting edge geometry, work piece hardness, feed rate and cutting speed on surface roughness and forces in finish hard turning of hardened AISI H13 steel.', International Journal of Advance Manufacturing Technology, Vol. 25, pp.262-269.
32. Ozel, T. and Karpat, Y. (2005) 'Predictive modelling of surface roughness and tool wear in hard turning using regression and neural networks', International of Machine Tools and Manufacture, Vol. 45, pp.467-479.
33. Ozel, T., Karpat, Y. and Davim, J.P. (2007) 'Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts', Journal of Material Processing Technology, Vol. 189, pp.192-198.
34. Poulachon, G., Banddyopadhyay, B.P., Jawahir, I.S., Pheulpin, S. and Emmanuel, S. (2003) 'The influence of the microstructure of hardened tool steel work piece on the wear of PCBN cutting tools', Networks' International of Machine Tools and Manufacture, Vol. 43, pp.139-144.
35. Puri, A.B. and Bhattacharyya, B. (2005) 'Modelling and analysis of white layer depth in a wire-cut EDM process through response surface methodology', Networks' International of Machine Tools and Manufacture, Vol. 25, pp.301-307.
36. Sales, W.F., Costa, S.C., Diniz, A.E., Bonney, J. and Ezugwu, E.O. (2008) 'Performance of coated, cemented carbide, mixed ceramic and PCBN-H tools turning W320 steel', International Journal of Advance Manufacturing Technology, DOI 10:1007/s00170-008-1523-4.
37. Singh, D. and Venkateswara, R.P. (2007) 'A surface roughness prediction model for hard turning process', International Journal of Advance Manufacturing Technology, Vol. 32, pp.1115-1124.
38. Toenshoff, H.K., Arendt, C. and Ben Amor, R. (2000) 'Cutting hardened steel', Annals of CIRP, Vol. 2, pp.1-19.
39. Zhou, J.M., Andersson, M. and Stahl, J.E. (2003) 'The monitoring of flank wear on the CBN tool in hard turning process', International Journal of Advance Manufacturing Technology, Vol. 22, pp.697-702.