Modeling the influence of microstructure in rolling contact fatigue

Journal of ASTM International

Volumn 7, Issue 2, 2010, Pages

  Alley, Erick S ^a   Sawamiphakdi, Krich ^b   Anderson, Patrick I ^b   Neu, Richard W ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b Timken Research   (United States)

Author keywords

Bearing steel; Crystal plasticity; Martensite; Non metallic inclusion; Retained austenite; Rolling contact fatigue; Transformation

Indexed keywords

BEARING STEELS; CRYSTAL PLASTICITY; NON-METALLIC INCLUSIONS; RETAINED AUSTENITE; ROLLING CONTACT FATIGUE;

BEARINGS (STRUCTURAL); FRICTION; MARTENSITE; MARTENSITIC STEEL; MATERIALS TESTING; MICROSTRUCTURE; PLASTICITY; STEEL METALLURGY; WEAR RESISTANCE;

AUSTENITE;

EID: 77949783441     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI102629     Document Type: Article

References (37)

1. Hyde, R. S., "Contact Fatigue of Hardened Steel," ASM Handbook, Vol. 19: Fatigue and Fracture, ASM International, Materials Park, OH, 1996, pp. 691-703.
2. Lormand, G., Meynaud, P., Vincent, A., Baudry, G., Girodin, D., and Dudragne, G., "From Cleanliness to Rolling Fatigue Life of Bearings - A New Approach," Bearing Steels: Into the 21st Century, ASTM STP 1327, J. J. C. Hoo and W. B. Green, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1998, pp. 55-69.
3. Murakami, Y. and Beretta, S., "Small Defects and Inhomogeneities in Fatigue Strength: Experiments, Models, and Statistical Implications," Extremes, Vol. 2, No. 2, 1999, pp. 123-147.
4. Becker, P., "Microstructural Changes Around Non-Metallic Inclusions Caused by Rolling Contact Fatigue of Ball Bearing Steels," Metals Technology, Vol. 8, No. 6, 1981, pp. 234-243.
5. Vincent, A., "From White Etching Areas around Inclusions to Crack Nucleation in Bearing Steels under Rolling Contact Fatigue," Bearing Steels: Into the 21st Century, ASTM STP 1327, J. J. C. Hoo and W. B. Green, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1998, pp. 109-123.
6. Ahmed, R., "Rolling Contact Fatigue," ASM Handbook, Vol. 11, Section 6E, R. J. Shipley and W. T. Becker, Eds., ASM International, Materials Park, OH, 2002, pp. 941-956.
7. Krauss, G., "Bending Fatigue of Carburized Steels," ASM Handbook, Vol. 19: Fatigue and Fracture, ASM International, Materials Park, OH, 1996, pp. 680-690.
8. Parrish, G., The Influence of Microstructure on the Properties of Case-Carburized Components, American Society for Metals, Materials Park, OH, 1980, pp. 72-84.
9. Voskamp, A. P., "Material Response to Rolling Contact Loading," J. Tribol., Vol. 107, 1985, pp. 359-366.
10. Voskamp, A. P. and Mittemeijer, E. J., "Crystallographic Preferred Orientation Induced by Cyclic Rolling Contact Loading," Metall. Mater. Trans. A, Vol. 27A, 1996, pp. 3445-3465.
11. Morrissey, R. J., McDowell, D. L., and Nicholas, T., " Microplasticity in HCF of Ti-6Al-4V," Int. J. Fatigue, Vol. 23, 2001, pp. S55-S64.
12. Goh, C. H., Wallace, J. M., Neu, R. W., and McDowell, D. L., "Polycrystal Plasticity Simulations of Fretting Fatigue," Int. J. Fatigue, Vol. 23, 2001, pp. S423-S435.
13. McDowell, D. L., "Simulation-Based Strategies for Microstructure-Sensitive Fatigue Modeling," Mater. Sci. Eng., A, Vol. 468-470, 2007, pp. 4-14.
14. Alley, E. S. and Neu, R. W., "Microstructure-Sensitive Modeling of Rolling Contact Fatigue," Int. J. Fatigue, in press.
15. Cailletaud, G. and Sai, K., "A Polycrystalline Model for the Description of Ratchetting: Effect of Intergranular and Intragranular Hardening," Mater. Sci. Eng., A, Vol. 480, 2008, pp. 24-39.
16. Xie, C. L., Ghosh, S., and Groeber, M., "Modeling Cyclic Deformation of HSLA Steels Using Crystal Plasticity," J. Eng. Mater. Technol., Vol. 126, 2004, pp. 339-352.
17. Kovac, M. and Cizelj, L., "Modeling Elasto-Plastic Behavior of Polycrystalline Grain Structure of Steels at Mesocopic Level," Nucl. Eng. Des., Vol. 235, 2005, pp. 1939-1950.
18. Prasannavenkatesan, R., "Microstructure-Sensitive Fatigue Modeling of Heat Treated and shot peened Martensitic Gear Steels," Ph. D thesis, Georgia Institute of Technology, Atlanta, GA.
19. Sinha, S. and Ghosh, S., "Modeling Cyclic Ratcheting Based Fatigue Life of HSLA Steels Using Crystal Plasticity FEM Simulations and Experiments," Int. J. Fatigue, Vol. 28, 2006, pp. 1690-1704.
20. ABAQUS, v 6. 7, SIMULIA, Providence, RI, USA, 2007.
21. Neu, R. W. and Sehitoglu, H., "Transformation of Retained Austenite in Carburized 4320 Steel," Metall. Trans. A, Vol. 22A, 1991, pp. 1491-1500.
22. Gall, K. and Sehitoglu, H., "The Role of Texture in Tension-Compression Asymmetry in Polycrys-talline NiTi," Int. J. Plast., Vol. 15, 1999, pp. 69-92.
23. Suiker, A. and Turtletaub, S., "Computational Modelling of Plasticity Induced by Martensitic Phase Transformations," Int. J. Numer. Methods Fluids, Vol. 63, 2005, pp. 1655-1693.
24. Karaman, I., Sehitoglu, H., Maier, H., and Balzer, M., "Stress-State Effects on the Stress-Induced Martensitic Transformation of Carburized 4320 Steels," Metall. Mater. Trans. A, Vol. 29A, 1998, pp. 427-427
25. Asaro, R. J., "Micromechanics of Crystals and Polycrystals," Advances in Applied Mechanics, Vol. 23, Academic, San Diego, 1983.
26. McGinty, R., 2001, "Multiscale Representation of Polycrystalline Inelasticity," Ph. D. thesis, Georgia Institute of Technology, Atlanta, GA.
27. Alley, E. S., 2009, "Influence of Microstructure in Rolling Contact Fatigue of Bearing Steels with Inclusions," Ph. D. thesis, Georgia Institute of Technology, Atlanta, GA.
28. McGinty, R. D. and McDowell, D. L., "A Semi-Implicit Integration Scheme for Rate Independent Finite Crystal Plasticity," Int. J. Plast., Vol. 22, 2006, pp. 996-1025.
29. Alley, E. S. and Neu, R. W., "A Micromechanical Model with Crystal Plasticity and Phase Transformation in 41100 Steel," Int. J. Plast., submitted.
30. Zhang, M., Zhang, J., and McDowell, D. L., "Microstructure-Based Crystal Plasticity Modeling of Cyclic Deformation of Ti-6Al-4V," Int. J. Plast., Vol. 23, 2007, pp. 1328-1348.
31. Zhang, M., 2007, "Crystal Plasticity Modeling of Ti-6Al-4V in Cyclic and Fretting Fatigue Analysis," Ph. D. thesis, Georgia Institute of Technology, Atlanta, GA.
32. Fatemi, A. and Socie, D., "A Critical Plane Approach to Multiaxial Fatigue Damage Including Out-of-phase Loading," Fatigue Fract. Eng. Mater. Struct., Vol. 11, No. 3, 1988, pp. 149-165.
33. Araujo, J. A., Nowell, D., and Vivacqua, R. C., "The Use of Multiaxial Fatigue Models to Predict Fretting Fatigue Life of Components Subjected to Different Contact Stress Fields," Fatigue Fract. Eng. Mater. Struct., Vol. 27, 2004, pp. 967-978.
34. Ambrico, J. and Begley, M., "Plasticity in Fretting Contact," J. Mech. Phys. Solids, Vol. 48, 2000, pp. 2391-2417.
35. Zhang, M., Neu, R. W., and McDowell, D. L., "Microstructure- Sensitive Modeling: Application to Fretting Contacts," Int. J. Fatigue, Vol. 31, 2009, pp. 1397-1406.
36. Zhang, J., Prasannavenkatesan, R., Shenoy, M. M., and McDowell, D. L., "Modeling Fatigue Crack Nucleation at Primary Inclusions in Carburized and Shot-Peened Martensitic Steel," Eng. Fract. Mech., Vol. 76, 2009, pp. 315-334.
37. Prasannavenkatesan, R., Zhang, J., McDowell, D. L., Olson, G. B., and Jou, H.-J., "3D Modeling of Subsurface Fatigue Crack Nucleation Potency of Primary Inclusions in Heat Treated and Shot Peened Martensitic Gear Steels," Int. J. Fatigue, Vol. 31, 2009, pp. 1176-1189.