Measurement system for characterization of gas and particle phase of high temperature combustion aerosols

Aerosol Science and Technology

Volumn 44, Issue 1, 2010, Pages 1-9

  Deuerling, Christian F ^a   Maguhn, Jürgen ^a   Nordsieck, Hermann O ^b   Warnecke, Ragnar ^c   Zimmermann, Ralf ^a,d  

^a INSTITUTE OF EPIDEMIOLOGY   (Germany)

^b Bavarian Institute of Applied Environmental Research and Technology   (Germany)

^c GKS Gemeinschaftskraftwerk Schweinfurt GmbH   (Germany)

^d UNIVERSITY OF ROSTOCK   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMIC DIAMETERS; AEROSOL COMPOSITION; AMBIENT TEMPERATURES; COARSE PARTICLES; CONCENTRATION ANALYSIS; GAS ANALYSIS; GASPHASE; HIGH-TEMPERATURE COMBUSTION; IDENTICAL SYSTEMS; INCINERATION PLANT; LOW PRESSURE IMPACTOR; MASS BALANCE; MASS CONCENTRATION; MEASUREMENT SYSTEM; PARTICLE ANALYSIS; PARTICLE PHASE; POROUS TUBES; RAPID CHANGES; SAMPLING LINES; SILICA GLASS; SIMULTANEOUS ANALYSIS; SOOTBLOWING; SYNCHRONOUS MEASUREMENTS; TIME-RESOLVED;

ATMOSPHERIC AEROSOLS; INCINERATION; MEASUREMENTS; PROBES; SILICA; SLAGS; SMOKE; TEMPERATURE;

GASES;

AEROSOL; ARTICLE; BOILER; COMBUSTION; COOLING; CORROSION; CYCLONE SEPARATOR; DILUTION; ENVIRONMENTAL TEMPERATURE; GAS; GAS ANALYSIS; HIGH TEMPERATURE; INCINERATION; MECHANICAL PROBE; PARTICLE SIZE; PARTICULATE MATTER; PRIORITY JOURNAL; SPECTROMETRY;

EID: 77949609984     PISSN: 02786826     EISSN: 15217388     Source Type: Journal    
DOI: 10.1080/02786820903325402     Document Type: Article

References (33)

1. Auvinen, A., Jokiniemi, J. K., and Renvall, T. (2003). Online Determination of Aerosol Resuspension in an Internal Tube Flow. Abstracts of the European Aerosol Conference 2003, Madrid, S109-S110, Spain.
2. Baron, P. A., and Willeke, K. (2001), Aerosol Measurement. Principles, Techniques and Applications. John Wiley and Sons, New York.
3. Brunner, T. (2006). Development of New and Innovative Particle Measurement Devices-High Temperature Low Pressure Impactor, in Aerosols and Coarse Fly Ashes in Fixed-Bed Biomass Combustion, T. Brunner, ed., Series. Thermal Biomass Utilization, Graz University of Technology, 7:26-39.
4. Christensen, K. A., Stenholm, M., and Livbjerg, H. (1998). The Formation of Submicron Aerosol Particles, HCl and SO2 in Straw-Fired Boilers, J. Aerosol Sci. 29:421-444.
5. Christmann, E. (1999). Methoden und Ergebnisse der Gasmesstechnik an der Druckkoh-lenstaubfeuerung, in Dorsten. Druckflamm-Seminar, Zeche Zollverein, 17.11.1998, K.W. Hannes, ed., 174-184.
6. Ciezki, H., and Schwein, B. (1996). Investigation ofGaseous and Solid Reaction Products in a Step Combustor using a Water Cooled Sampling Probe. 32rd Joint Propulsion Conference, Lake Buena Vista, FL, USA, July 1-3, 1996.
7. Dixkens, J., and Fissan, H. (1995). Development of a Ceramic-Cascade- Impactor for Size Classified Particle Sampling in High Pressure- and High Temperature-(HPHT) Processes. Staub-Reinhaltung der Luft 55:283-291.
8. Enders, M., Spiegel, M., Albrecht, J., and Putnis, A. (2000). Mineralogical Problems inAdvanced Power Systems. The Contribution of Slag andGaseous Chemical Species to the Fly Ash, Eur. J. Mineral. 12:639-650.
9. Ferge, T., Maguhn, J., Felber, H., and Zimmermann, R. (2004). Particle Collection Efficiency and Particle Re-Entrainment of an Electrostatic Precipitator in a Sewage Sludge Incineration Plant, Environ. Sci. Technol. 38:1545-1553.
10. Jensen, J. R., Nielsen, L. B., Schultz-Møller, C., Wedel, S., and Livbjerg, H. (2000). The Nucleation of Aerosols in Flue Gases with a High Content of Alkali-A Laboratory Study, Aerosol Sci. Technol. 33:490-509.
11. Jiḿenez, S., and Ballester, J. (2005).A Comparative Study of DifferentMethods for the Sampling of High Temperature Combustion Aerosols, Aerosol Sci. Technol. 39:811-821.
12. Joeller,M. (2008).Modellierung der Bildung und des Verhaltens von Aerosolen in Biomasse-Rostfeuerungen. Thesis, Institute of Process Technology, Graz (Austria) University of Technology.
13. Kassmann, H., Amand, L. E., and Leckner, B. (1997). Secondary Effects in Sampling Ammonia During Measurements in a Circulating Fluidized-Bed Combustor, J. Inst. Energ. 70:95-101.
14. Lamminen, E., and Isherwood, H. (2007). Effect of Dilution Temperature on Measured Particle Size Distributions from a Coal-Firing Power Plant. Presentation, AAAR.
15. Lind, T. (1999). Ash formation in Circulating Fluidized Bed Combustion of Coal and Solid Biomass. Thesis, Helsinki University of Technology (Espoo, Finland), VTT Publications 387.
16. Lind, T., Valmari, T., Kauppinen, E., Sfiris, G., Nilsson, K., and Maenhaut, W. (1999). Volatilization of the Heavy Metals during Circulating Fluidized Bed Combustion of Forest Residue, Environ. Sci. Technol. 33:496-502.
17. Lind, T., Valmari, T., Kauppinen, E., Nilsson, K., Sfiris, G., and Maenhaut, W. (2000). Ash Formation Mechanisms During Combustion of Wood in Circulating Fluidized Beds. Proceedings of the Combustion Institute, 28: 2287-2295.
18. Lipsky, E., Stanier, C. O., Pandis, S. N., and Robinson, A. L. (2002). Effects of Sampling Conditions on the Size Distribution of Fine Particulate Matter Emitted from a Pilot-Scale Pulverized-Coal Combustor, Energy Fuels 16:302-310.
19. Lipsky, E. M., Pekney, N. J., Walbert, G. F. et al. (2004). Effects of Dilution Sampling on Fine Particle Emissions from Pulverized Coal Combustion, Aerosol Sci. Technol. 38:574-587.
20. Maguhn, J., Karg, E., Kettrup, A., and Zimmermann, R. (2003). On-Line Analysis of the Size Distribution of Fine and Ultrafine Aerosol Particles in Flue and Stack Gas of a Municipal Waste Incineration Plant. Effects of Dynamic Process Control Measures and Emission Reduction Devices, Environ. Sci. Technol. 37:4761-4770.
21. Mikkanen, P., Kauppinen, E. I., Pyykönen, J., Aurela, M., Vakkilainen, E. K., and Janka, K. (1999). Alkali Salt Ash Formation in Four Finnish Industrial Recovery Boilers, Energy Fuels, 13:778-795.
22. Mikkanen, P. (2000). Fly Ash Particle Formation in Kraft Recovery Boilers. Thesis, Espoo (FIN), VTT Publications 421, Technical Research Centre of Finland.
23. Mikkanen, P., Jokiniemi, J. K., Kauppinen, E. I., and Vakkilainen, E. K. (2001). Coarse Ash Particle Characteristics in a Pulp and Paper Industry Chemical Recovery Boiler. Fuel 80:987-999.
24. Pyykönen, J., Miettinen, M., Sippula, O., Leskinen, A., Raunemaa, T., and Jokiniemi, J. (2007). Nucleation in a Perforated Tube Diluter, J. Aerosol Sci. 38:172-191.
25. Ristimäki, J., Virtanen, A., Marjamäki, M., Rostedt, A., and Keskinen, J. (2002). On-Line Measurement of Size Distribution and Effective Density of Submicron Aerosol Particles, Aerosol Sci. 33:1541-1557.
26. Schroer, C., and Konys, J. (2002). Rauchgasseitige Hochtemperaturkorrosion in Müllverbren-nungsanlagen. Wissenschaftliche Berichte des Forschungszentrums Karlsruhe, FZKA 6695, ISSN 0947-8620.
27. Spiegel, W. (2006). Analyse Des Rohgases und der Kesselablagerung zur Beurteilung der Ersatzbrennstoffqualität, in Energie aus Abfall, K. J. Thoḿe- Kozmiensky and M. Beckmann, eds. Neuruppin, TK Verlag, 1:441-458.
28. Turrek, T. (2004). Diluting Techniques for Combustion Aerosol Sampling. University of Kuopio, Dept. of Environmental Science, NaPES-Project, Technical Report.
29. VDI-Richtlinie 2066, Blatt 1 (1975). Messen von Partikeln, Staubmessungen in strömenden Gasen, Gravimetrische Bestimmung der Staubbeladung, Übersicht.
30. Virtanen, A., Ristimäki, J., and Keskinen, J. (2004). Method for Measuring Effective Density and Fractal Dimension of Aerosol Agglomerates, Aerosol Sci. Technol. 38:437-446.
31. Wang, J., Flagan, R. C., and Seinfeld, J. H. (2002). Diffusional Losses in Particle Sampling SystemsContainingBends and Elbows, J. Aerosol Sci. 33:843-857.
32. Wilson, J. C., Lafleur, B. G., Hilbert, H., Seebaugh,W. R., Fox, J., Gesler, D.W., Brock, C. A., Huebert, B. J., and Mullen, J. (2004). Function and Performance of a Low Turbulence Inlet for Sampling Supermicron Particles from Aircraft Platforms, Aerosol Sci. Technol. 38: 790-802.
33. Zimmermann, R., Maguhn, J., and Kettrup, A. (2000). On-Line Analysis of Combustion Aerosols in the State of Formation (900-300°c) at Industrial Incinerators, J. Aerosol Sci. 31, Suppl. 1:622-623.