Development of novel dental nanocomposites reinforced with polyhedral oligomeric silsesquioxane (POSS)

Dental Materials

Volumn 26, Issue 5, 2010, Pages 456-462

  Wu, Xiaorong ^a   Sun, Yi ^a   Xie, Weili ^b   Liu, Yanju ^a   Song, Xueyu ^a  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

^b HARBIN MEDICAL UNIVERSITY   (China)

Author keywords

Dental composite resins; Mechanical properties; Nanocomposites; Polyhedral oligomeric silsesquioxane (POSS); Shrinkage

Indexed keywords

COMPRESSIVE MODULI; COMPRESSIVE STATE; DENTAL COMPOSITE RESINS; DENTAL NANOCOMPOSITES; FLEXURAL MODULUS; FLEXURAL STRENGTH; FLEXURE STRENGTH; LOW SHRINKAGE; PHYSICOMECHANICAL PROPERTIES; POLYHEDRAL OLIGOMERIC SILSESQUIOXANE (POSS); POLYHEDRAL OLIGOMERIC SILSESQUIOXANES; REINFORCED MECHANISM; REINFORCING MECHANISM; VOLUMETRIC SHRINKAGE; WEIGHT PERCENTAGES;

BENDING STRENGTH; COMPRESSIVE STRENGTH; DENTAL COMPOSITES; DENTAL PROSTHESES; FRACTURE; HARDNESS; NANOCOMPOSITES; RESINS; SHRINKAGE; TOUGHNESS; X RAY DIFFRACTION;

MECHANICAL PROPERTIES;

METHACRYLIC ACID DERIVATIVE; NANOCOMPOSITE; ORGANOSILICON DERIVATIVE; POLYHEDRAL OLIGOMERIC SILSESQUIOXANE METHACRYLATE; RESIN;

ARTICLE; CHEMISTRY; COMPRESSIVE STRENGTH; DENTAL BONDING; DENTAL CARE; ELASTICITY; HARDNESS; INFRARED SPECTROSCOPY; MATERIALS TESTING; PLIABILITY; SYNTHESIS; X RAY DIFFRACTION;

COMPOSITE RESINS; COMPRESSIVE STRENGTH; DENTAL BONDING, LIGHT-CURED; DENTAL STRESS ANALYSIS; ELASTICITY; HARDNESS; MATERIALS TESTING; METHACRYLATES; NANOCOMPOSITES; ORGANOSILICON COMPOUNDS; PLIABILITY; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; X-RAY DIFFRACTION;

EID: 77949485573     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.11.161     Document Type: Article

References (31)

1. Soh M.S., Sellinger A., and Yap A.U.J. Dental nanocomposites. Curr Nanosci 2 4 (2006) 373-381
2. Kilambi H., Cramer N.B., Schneidewind L.H., and Shah P. Evaluation of highly reactive mono-methacrylates as reactive diluents for BisGMA-based dental composites. Dent Mater 25 1 (2009) 33-38
3. 2 composites as dental restorative materials. Compos Sci Technol 68 13 (2008) 2811-2817
4. Li J., Li H., and Fok S.L. A mathematical analysis of shrinkage stress development in dental composite restorations during resin polymerization. Dent Mater 24 7 (2008) 923-931
5. Petrovic L.M., and Atanackovic T.M. A model for shrinkage strain in photo polymerization of dental composites. Dent Mater 24 4 (2008) 556-560
6. Bianchi E.C., de Aguiar P.R., Alves M.C.S., de Freitas C.A., Rodrigues A.R., and Carvalho O.B. Comparing abrasive wear and microhardness of 13 dental composite resins. Polimeroa-Ciencia e Tecnologia 17 2 (2007) 130-136
7. Lee Y.-K., Lu H., Oguri M., and Powers J.M. Changes in color and staining of dental composite resins after wear simulation. J Biomed Mater Res Part B: Appl Biomater 82B 2 (2007) 313-319
8. Tanimoto Y., and Nemoto K. Influence of particle size of fillers on frictional wear of dental composite resins. Compos Interfaces 11 1 (2004) 15-24
9. Zhang Y., Zhang D., Qin C., and Xu J. Physical and mechanical properties of dental nanocomposites composed of aliphatic epoxy resin and epoxidized aromatic hyperbranched polymers. Polym Compos 30 2 (2009) 176-181
10. Pereira S.G., Osorio R., Toledano M., et al. Novel light-cured resins and composites with improved physicochemical properties. Dent Mater 23 10 (2007) 1189-1198
11. Xu H.H.K., Moreau J.L., Sun L., and Chow L.C. Strength and fluoride release characteristics of a calcium fluoride based dental nanocomposite. Biomaterials 29 32 (2008) 4261-4267
12. Shahdad S.A., McCabe J.F., Bull S., et al. Hardness measured with traditional Vickers and Martens hardness methods. Dent Mater 23 9 (2007) 1079-1085
13. Yudovin-Farber I., Beyth N., Nyska A., et al. Surface characterization and biocompatibility of restorative resin containing nanoparticles. Biomacromolecules 9 11 (2008) 3044-3050
14. Moharamzadeh K., Van Noort R., Brook I.M., et al. HPLC analysis of components released from dental composites with different resin compositions using different extraction media. J Mater Sci: Mater Med 18 1 (2007) 133-137
15. Eick J.D., Smith R.E., Pinzino C.S., et al. Stability of silorane dental monomers in aqueous systems. J Dent 34 6 (2006) 405-410
16. Bogdal D., Penczek P., Pielichowski J., et al. Microwave assisted synthesis, crosslinking, and processing of polymeric materials. Liquid Chromatogr FTIR Microspectrosc Microwave Assisted Synth 163 (2003) 193-263
17. Amritphale S.S., Anshul A., Chandra N., et al. A novel process for making radiopaque materials using bauxite-Red mud. J Eur Ceram Soc 27 4 (2007) 1945-1951
18. Musselman M. Composites in medicine. Compos Technol 12 (2003) 24-27
19. Mark J.E., and Lee Y.C. In: Bianconi P.A. (Ed). Hybrid organic-inorganic composites (1995), American Chemical Society, Washington, DC
20. Jang J., Bae J., and Kang D. Phase-separation prevention and performance improvement of poly (vinylacetate)/TEOS hybrid using modified sol-gel process. J Appl Polym Sci 82 9 (2001) 2310-2318
21. Sellinger A., and Laine R.M. Silsesquioxanes as synthetic platforms 3-photocurable liquid epoxides as inorganic/organic hybrids precursors. Chem Mater 8 (1996) 1592-1593
22. Gao F., Tong Y., Schricker S.R., and Culbertson B.M. Evaluation of neat resins based on methacrylates modified with methacryl-POSS, as potential organic-inorganic hybrids for formulating dental restoratives. Polym Adv Technol 12 6 (2001) 355-360
23. Fong H., Dickens S.H., and Flaim G.M. Evaluation of dental restorative composites containing polyhedral oligomeric silisesquioxane methacrylate. Dent Mater 21 6 (2005) 520-529
24. Dodiuk-Kenig H., Maoz Y., Lizenboim K., et al. The effect of grafted caged silica (polyhedral oligomeric silesquioxanes) on the properties of dental composites and adhesives. J Adhes Sci Technol 20 12 (2006) 1401-1412
25. Li Q., Zhou Y., Hang X., et al. Synthesis and characterization of a novel arylacetylene oligomer containing POSS units in main chains. Eur Polym J 44 8 (2008) 2538-2544
26. Cho H., Liang K., Chatterjee S., et al. Synthesis, morphology, and viscoelastic properties of polyhedral oligomeric silsesquioxane nanocomposites with epoxy and cyanate ester matrices. J Inorg Organomet Polym Mater 15 4 (2005) 541-553
27. Dell'erba I.E., and Williams R.J.J. Synthesis of oligomeric silsesquioxanes functionalized with (b-carboxyl) ester groups and their use as modifiers of epoxy networks. Eur Polym J 43 (2007) 2759-2767
28. Libor M., Adam S., Josef P., et al. Epoxy networks reinforced with polyhedral oligomeric silesquioxanes (POSS). Structure and morphology. Macromolecules 37 25 (2004) 9449-9456
29. Qi D.M., Bao Y.Z., Weng Z.X., et al. Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization. Polymer 47 13 (2006) 4622-4629
30. Zhang B.Q., Ding Y.F., Chen P., et al. Fibrillation of thermotropic liquid crystalline polymer enhanced by nano-clay in nylon-6 matrix. Polymer 46 14 (2005) 5385-5395
31. Heinrich G., and Kluppel M. Recent advances in the theory of filler networking in elastomers. Adv Polym Sci 160 (2002) 1-44