Abrasive water jet cutting as a new procedure for cutting cancellous bone - In vitro testing in comparison with the oscillating saw

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 71, Issue 2, 2004, Pages 223-228

  Schwieger, Karsten ^a   Carrero, Volker ^b   Rentzsch, Reemt ^b   Becker, Axel ^b   Bishop, Nick ^a   Hille, Ekkehard ^b   Louis, Hartmut ^c   Morlock, Michael ^a   Honl, Matthias ^b  

^a HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

^b Allgemeines Krankenhaus Eilbek   (Germany)

^c LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

Bone; Cancellous bone; Cutting quality; Implantation of prostheses; Water jet cutting

Indexed keywords

BIOCOMPATIBILITY; BONE; OPTIMIZATION; SURFACE ROUGHNESS; TUMORS;

ABRASIVE WATER JET CUTTING; OSTEOTOMICES; THERMAL DAMAGE;

SURGERY;

ALPHA LACTOSE; WATER;

ABRASION; ANIMAL TISSUE; ARTICLE; BIOCOMPATIBILITY; CANCELLOUS BONE; CONTROLLED STUDY; ENDOPROSTHESIS; FEMUR CONDYLE; FLOW RATE; INTERMETHOD COMPARISON; NONHUMAN; OSCILLATION; OSTEOTOMY; PRESSURE; SURFACE PROPERTY; SURGICAL TECHNIQUE; SWINE; WATER JET CUTTING;

ANIMALS; BONE AND BONES; FEMUR; ORTHOPEDIC PROCEDURES; PRESSURE; SURFACE PROPERTIES; SURGICAL INSTRUMENTS; SWINE; THERMODYNAMICS;

EID: 7744225419     PISSN: 00219304     EISSN: None     Source Type: Journal    
DOI: 10.1002/jbm.b.10078     Document Type: Article

References (16)

1. Ark TW, Neal JG, Thacker JG, Edlich RF. Influence of irrigation solutions on oscillating bone saw blade performance. J Biomed Mater Res 1998;43:108-112.
2. Van Ham G, Denis K, Vander Sloten J, Van Audekercke R, Van der Perre PG, De Schutter J, Aertbelien E, Demey S, Bellemans J. Machining and accuracy studies for a tibial knee implant using a force-controlled robot. Comput Aided Surg 1998;3:123-133.
3. Arrien A, de Pablos J. The importance of the technique and level of osteotomy in bone lengthening. In: de Pablos J, Canadell J, editors. Bone lengthening. Pamplona: Servicio de Publicaciones de la Universidad de Navarra, S.A.; 1990. p 171-182.
4. Jahn R, Dressel M, Neu W, Jungbluth KH. Ablation of hard biological tissue with the excimer laser. Unfallchir 1992;18:261-265.
5. Siebert W. Osteotomy with the experimental laser system. Fortschr Kiefer Gesichtschir 1993;38:149-151.
6. 2 laser. Lasers Surg Med 1987;7:512-519.
7. Nelson JS, Yow L, Liaw LH, Macleay L, Zavar RB, Orenstein A, Wright WH, Andrews JJ, Berns MW. Ablation of bone and methacrylate by a prototype mid-infrared erbium:YAG laser. Lasers Surg Med 1988;8:494-500.
8. Lustmann J, Ulmansky M, Fuxbrunner A, Lewis A. 193 nm excimer laser ablation of bone. Lasers Surg Med 1991;11:51-57.
9. Hata Y, Sasaki F, Takahashi H, Ohkawa Y, Taguchi K, Une Y, Uchino J. Liver resection in children, using a water-jet. J Pediatr Surg 1994;29:648-650.
10. Honl M, Dierk O, Küster JR, Müller G, Müller V, Hille E, Morlock M. Water jet discotomy with microinvasive approach-in vitro testing and initial clinical aspects of a new procedure. Z Orthop Ihre Grenzgeb 2001;139:45-51.
11. Honl M, Rentzsch R, Müller G, Brandt C, Bluhm A, Hille E, Louis H, Morlock M. The use of water-jetting technology in prostheses revision surgery - first results of parameter studies on bone and bone cement. J Biomed Mater Res 2000;53:781-790.
12. Honl M, Rentzsch R, Lampe F, Müller V, Dierk O, Hille E, Louis H, Morlock M. Water jet cutting for bones and bone cement - parameter study of possibilities and limits of a new method. Biomed Tech Berlin 2000;45:222-227.
13. Chao J, Geskin ES. Experimental study of the striation formation and spectral analysis of the abrasive waterjet generated surfaces. In: 7th American Water Jet Conference, St. Louis; 1993. p 27-41.
14. Guo NS, Leu M, Meier G. Surface structure and kerf geometry in abrasive water jet cutting: Formation and optimization. In: 7th American Water Jet Conference, St. Louis; 2002. p 1-25.
15. Kovacevic R. Surface texture in abrasive waterjet cutting. J Manufact Syst 1991;10:32-40.
16. Hashish M. On the modeling of surface waviness produced by abrasive-waterjets. In: 11th International Symposium on Jet Cutting Technology, Dordrecht; 1992. p 17-34.