Parameter optimization of time-varying stiffness method for chatter suppression based on magnetorheological fluid-controlled boring bar

International Journal of Advanced Manufacturing Technology

Volumn 46, Issue 9-12, 2010, Pages 1071-1083

  Mei, Deqing ^a   Yao, Zhehe ^a   Kong, Tianrong ^a   Chen, Zichen ^a  

^a ZHEJIANG UNIVERSITY   (China)

Author keywords

Boring bar; Chatter suppression; MR fluid; Parameters optimization; Time varying stiffness method

Indexed keywords

APPLIED MAGNETIC FIELDS; CHATTER SUPPRESSION; CUTTING DYNAMICS; ENERGY METHOD; LARGE AMPLITUDE; MAGNETO-RHEOLOGICAL FLUID; MAGNETORHEOLOGICAL FLUIDS; MR FLUID; NUMERICAL SIMULATION; PARAMETER OPTIMIZATION; PARAMETERS OPTIMIZATION; REGENERATIVE CHATTERS; SPINDLE SPEED; SQUARE WAVES; TIME-VARYING STIFFNESS; WAVE FORMS;

BORING; COMPUTER SIMULATION; FLUIDS; MAGNETIC FIELDS; NATURAL FREQUENCIES; SPEED CONTROL; STIFFNESS; STRUCTURAL OPTIMIZATION; TIME VARYING SYSTEMS;

MAGNETOS;

EID: 77349100585     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-009-2166-9     Document Type: Article

References (32)

1. DG Lee NP Suh 1984 Manufacturing and testing of chatter free boring bars CIRP Annals-Manufacturing Technology 37 1 365 368 10.1016/S0007-8506(07) 61655-2 10.1016/S0007-8506(07)61655-2
2. CS Anderson SE Semercigil ÖF Turan 2007 A passive adaptor to enhance chatter stability for end mills Int J Mach Tools Manuf 47 11 1777 1785 10.1016/j.ijmachtools.2006.06.020 10.1016/j.ijmachtools.2006.06.020 (Pubitemid 46634965)
3. E Budak A Tekeli 2005 Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs CIRP Annals-Manufacturing Technology 54 1 353 356 10.1016/S0007-8506(07)60121-8 10.1016/S0007-8506(07)60121-8
4. S Ema E Marui 2008 Suppression of chatter vibration of boring tools using impact dampers Int J Mach Tools Manuf 40 8 1141 1156 10.1016/S0890-6955(99) 00119-4 10.1016/S0890-6955(99)00119-4
5. KJ Liu KE Rouch 1991 Optimal passive vibration control of cutting process stability in milling J Mater Process Technol 28 1-2 285 294 10.1016/ 0924-0136(91)90227-6 10.1016/0924-0136(91)90227-6
6. ND Sims 2007 Vibration absorbers for chatter suppression: a new analytical tuning methodology J Sound Vib 301 3-5 592 607 10.1016/ j.jsv.2006.10.020 10.1016/j.jsv.2006.10.020 (Pubitemid 46149816)
7. J Albizuri MH Fernandes I Garitaonandia X Sabalza R Uribe-Etxeberria JM Hernández 2007 An active system of reduction of vibrations in a centerless grinding machine using piezoelectric actuators Int J Mach Tools Manuf 47 10 1607 1614 10.1016/j.ijmachtools.2006.11.004 10.1016/j.ijmachtools.2006. 11.004 (Pubitemid 46566495)
8. H Tanaka F Obata T Matsubara H Mizumoto 1994 Active chatter suppression of slender boring bar using piezoelectric actuators JSME Int J, Ser C-Dyn Control Robotics Des Manuf 37 3 601 606 http://ci.nii.ac.jp/naid/110004069087/
9. CR Knospe 2007 Active magnetic bearings for machining applications Control Eng Pract 15 3 307 313 10.1016/j.conengprac.2005.12.002 10.1016/j.conengprac.2005.12.002 (Pubitemid 44817579)
10. M Chen CR Knospe 2007 Control approaches to the suppression of machining chatter using active magnetic bearings IEEE Trans Control Syst Technol 15 2 220 232 10.1109/TCST.2006.886419 10.1109/TCST.2006.886419 (Pubitemid 46477654)
11. JL Dohner JP Lauffer TD Hinnerichs N Shankar M Regelbrugge CM Kwan R Xu B Winterbauer K Bridger 2004 Mitigation of chatter instabilities in milling by active structural control J Sound Vib 269 1-2 197 211 10.1016/ S0022-460X(03)00069-5 10.1016/S0022-460X(03)00069-5
12. C Brecher A Schulz M Week 2005 Electrohydraulic active damping system CIRP Annals-Manufacturing Technology 54 1 389 392 10.1016/S0007-8506(07)60129-2 10.1016/S0007-8506(07)60129-2
13. A Ganguli A Deraemaeker A Preumont 2007 Regenerative chatter reduction by active damping control J Sound Vib 300 3-5 847 862 10.1016/ j.jsv.2006.09.005 10.1016/j.jsv.2006.09.005 (Pubitemid 46039820)
14. A Ganguli A Deraemaeker M Horodinca A Preumont 2005 Active damping of chatter in machine tools-demonstration with a 'hardware-in-the-loop' simulator Proc Inst Mech Eng, Part I: J Syst Control Eng 219 5 359 369 10.1243/095965105X33455 10.1243/095965105X33455 (Pubitemid 41204974)
15. YS Tarng YW Hseih TC Li 1996 Automatic selection of spindle speed for suppression of regenerative chatter in turning Int J Adv Manuf Technol 11 1 12 17 10.1007/BF01177179 10.1007/BF01177179
16. A Yilmaz E Al-Regib J Ni 2002 Machine tool chatter suppression by multi-level random spindle speed variation Trans ASME, J Manuf Sci Eng 124 2 208 216 10.1115/1.1378794 10.1115/1.1378794 (Pubitemid 35202608)
17. E Al-Regib J Ni SH Lee 2003 Programming spindle speed variation for machine tool chatter suppression Int J Mach Tools Manuf 43 12 1229 1240 10.1016/S0890-6955(03)00126-3 10.1016/S0890-6955(03)00126-3
18. FL Yang B Zhang JY Yu 2003 Chatter suppression with multiple time-varying parameters in turning J Mater Process Technol 141 3 431 438 10.1016/S0924-0136(03)00427-8 10.1016/S0924-0136(03)00427-8 2012516
19. F Ismail EG Kubica 1995 Active suppression of chatter in peripheral milling. Part 1. A statistical indicator to evaluate the spindle speed modulation method Int J Adv Manuf Technol 10 5 299 310 10.1007/BF01178983 10.1007/BF01178983
20. SG Tewani KE Rouch BL Walcott 1995 A study of cutting process stability of a boring bar with active dynamic absorber Int J Mach Tools Manuf 35 1 91 108 10.1016/0890-6955(95)80009-3 10.1016/0890-6955(95)80009-3
21. Adkins CA, Huang ZM, Wong BW, Walcott BL, Rouch KE (1996) Active vibration control using an electromagnetic absorber with two degrees of freedom. Proceedings of IEEE Southeastcon Conference, Tampa, USA, pp 175-178. doi:10.1109/ SECON.1996.510051
22. Wong BW, Walcott BL, Rouch KE (1995) Active vibration control via electromagnetic dynamic absorbers. Proceedings of IEEE Conference on Control Applications, Albany, USA, pp 868-874. doi:10.1109/CCA.1995.555868
23. Marra MA, Walcott BL, Rouch KE, Tewani SG (1995) H∞-vibration control for machining using active dynamic absorber technology. Proceedings of the American Control Conference, Seattle, USA, pp 739-743
24. C Mei 2005 Active regenerative chatter suppression during boring manufacturing process Robot Comput-Integr Manuf 21 2 153 158 10.1016/ j.rcim.2004.07.011 10.1016/j.rcim.2004.07.011
25. M Wang RY Fei 1999 Chatter suppression based on nonlinear vibration characteristic of electrorheological fluids Int J Mach Tools Manuf 39 12 1925 1934 10.1016/S0890-6955(99)00039-5 10.1016/S0890-6955(99)00039-5 (Pubitemid 30508632)
26. AH Lam WH Liao 2003 Semi-active control of automotive suspension systems with magnetorheological dampers Int J Veh Des 33 1-3 50 75 10.1504/IJVD.2003. 003652 10.1504/IJVD.2003.003652
27. Raymond DW, Elsayed MA. Controllable magneto-rheological fluid-based dampers for drilling. USA Patent 7,036,612
28. Mei DQ, Kong TR, Li X. An intelligent boring bar with chatter self-suppressing based on magnetorheological fluid. China Patent 200510062179.4
29. DQ Mei TR Kong AJ Shih ZC Chen 2009 Magnetorheological fluid controlled boring bar for chatter suppression J Mater Process Technol 209 4 1861 1870 10.1016/j.jmatprotec.2008.04.037 10.1016/j.jmatprotec.2008.04.037
30. Yang S, Tang HL, Liao BY (1983) Machine tool dynamics. China Machine Press, Beijing (in Chinese)
31. Chen YD (1988) Mechanical vibration (Linear System). Zhejiang University Press, Hangzhou (in Chinese)
32. Hoshi T (1984) Analysis and countermeasure on mechanical machining chatter. Shanghai Scientific and Technical Press, Shanghai (in Chinese, translated by Gu CX)