Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr-Cr3C2

Materials and Design

Volumn 31, Issue 6, 2010, Pages 2737-2744

  Sun, Gui fang ^a   Zhang, Yong kang ^a   Liu, Chang sheng ^b   Luo, Kai yu ^a   Tao, Xing qi ^c   Li, Peng ^a  

^a JIANGSU UNIVERSITY   (China)

^b NORTHEASTERN UNIVERSITY   (China)

^c Shenyang Dalu Laser Whole Set Equipment Limited Company   (China)

Author keywords

Hardness; High temperature; Laser surface alloying; Sliding wear resistance; Steel

Indexed keywords

ALLOYED LAYERS; CAST STEEL; CRACK FREE; GRAIN REFINING; HARD PHASIS; HIGH TEMPERATURE; HOMOGENEOUS STRUCTURE; LASER SURFACE ALLOYING; LASER SURFACE ALLOYING TECHNIQUE; MARTENSITE PHASIS; MATRIX; METALLURGICAL BONDING; RETAINED AUSTENITE; SCANNING SPEED; SLIDING WEAR; SLIDING WEAR RESISTANCE; SOLUTION STRENGTHENING; WEAR RESISTANT;

ALLOYING; CHROMIUM; MICROHARDNESS; MICROSTRUCTURE; REFINING; STEEL CASTINGS; STEEL METALLURGY; SUBSTRATES; WEAR OF MATERIALS;

WEAR RESISTANCE;

EID: 76949084919     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.01.021     Document Type: Article

References (35)

1. Colás R., Raḿi{dotless}rez J., Sandoval I., Morales J.C., and Leduc L.A. Damage in hot rolling work rolls. Wear 230 (1999) 56-60
2. Fujii Y., and Maeda K. Flaking failure in rolling contact fatigue caused by indentations on mating surface (I). Reproduction of flaking failure accompanied by cracks extending bi-directionally relative to the load-movement. Wear 252 (2002) 787-798
3. Hwang K.C., Lee S., and Lee H.C. Effects of alloying elements on microstructure and fracture properties of cast high speed steel rolls. Part II. Fracture behavior. Mater Sci Eng A 254 (1998) 296-304
4. Datsyshyn O.P., and Kopylets M.M. Prediction of the service life of rolling bodies according to the development of a subsurface crack. Mater Sci 39 (2003) 765-779
5. Golkin Yu E., Sabel'nikov Yu A., and Men'shikov O.I. New system for changing the work rolls in the first stand of temper-rolling mills. Metallurgist 46 (2002) 185-186
6. Nakajima A., Mawatari T., Yoshida M., Tani K., and Nakahira A. Effects of coating thickness and slip ratio on durability of thermally sprayed WC cermet coating in rolling/sliding contact. Wear 241 (2000) 166-173
7. Sari N.Y., and Yilmaz M. Improvement of wear resistance of wire drawing rolls with Cr-Ni-B-Si + WC thermal spraying powders. Surf Coat Technol 202 (2008) 3136-3141
8. Zhou L., Sun D.L., Liu C.S., and Wu Q. Fatigue behavior of high speed steel roll materials for hot rolling by laser impacting. J Iron Steel Res Int 13 (2006) 49-52
9. Hu Y.P., Chen C.W., and Mukherjee K. Development of a new laser cladding process for manufacturing cutting and stamping dies. J Mater Sci 33 (1998) 1287-1292
10. Li Z.Y., Yang M.J., Liu W.J., and Zhong M.L. Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing. Surf Coat Technol 200 (2006) 4493-4499
11. Du D., He Y.F., Sui B., Xiong L.J., and Zhang H. Laser texturing of rollers by pulsed Nd: YAG laser. J Mater Process Technol 161 (2005) 456-461
12. Walker A., Flower H.M., and West D.R.F. The laser surface-alloying of iron with carbon. J Mater Sci 20 (1985) 989-995
13. Navas C., Conde A., Fernández B.J., Zubiri F., and Damborenea de J. Laser coatings to improve wear resistance of mould steel. Surf Coat Technol 194 (2005) 136-142
14. Hann S.K., and Gates J.D. A transformation toughening white cast iron. J Mater Sci 32 (1997) 1249-1259
15. Li C.S., Yu H.L., Deng G.Y., Liu X.H., and Wang G.D. Numerical simulation of temperature field and thermal stress field of work roll during hot strip rolling. Iron Steel Res Int 14 (2007) 18-21
16. Vilar R., Colaco R., and Almeida A. Laser surface treatment of tool steels. Opt Quant Electron 27 (1995) 1273-1289
17. Fouquet F., and Szmatula E. Laser surface melting of a pearlitic grey cast iron. Mater Sci Eng 98 (1988) 305-308
18. Zarubova N., Kraus V., and Cermak J. Mechanisms of phase transformations during laser treatment of grey cast iron. J Mater Sci 27 (1992) 3487-3496
19. Colaco R., and Vilar R. Effect of the processing parameters on the proportion of retained austenite in laser surface melted tool steels. J Mater Sci Lett 17 (1998) 563-567
20. Hanlon D.N., and Rainforth W.M. The rolling sliding wear response of conventionally processed and spray formed high speed steel at ambient and elevated temperature. Wear 255 (2003) 956-966
21. Zum Gahr K.-H., and Doane D.V. Optimizing fracture toughness and abrasion resistance in white cast irons. Metall Trans A 11 (1980) 613-620
22. Li C.G., Zhou Q.D., Song G.S., and Fang Z.S. Influence of carbon content of martensitic matrix and retained austenite on wear of martensitic ductile iron. Wear 162-164 (1993) 75-82
23. Arques J.L., and Prado J.M. The dry wear resistance of a carbonitrided steel. Wear 103 (1985) 321-331
24. Siepak J. The influence of contact stress on the wear of a carburized steel case with a high content of retained austenite. Wear 80 (1982) 301-305
25. Colaco R., and Vilar R. On the influence of retained austenite in the abrasive wear behavior of a laser surface melted tool steel. Wear 258 (2005) 225-231
26. Liu J., Li S., and Man Y. Wear resistance of Ni-hard 4 and high-chromium cast iron re-evaluated. Wear 166 (1993) 37-40
27. 3 composite coatings under liquid paraffin lubrication. Wear 240 (2000) 1-8
28. Powell G.L.F. Secondary carbide precipitation in an 18 wt.%Cr-1 wt.%Mo white iron. J Mater Sci 31 (1996) 707-711
29. Buchanan V.E., Shipway P.H., and McCartney D.G. Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugarcane industry. Wear 263 (2007) 99-110
30. Buchely M.F., Gutierrez J.C., Leon L.M., and Toro A. The effect of microstructure on abrasive wear of hardfacing alloys. Wear 259 (2005) 52-61
31. Chatterjee S., and Pal T.K. Wear behaviour of hardfacing deposits on cast iron. Wear 255 (2003) 417-425
32. Badisch E., and Mitterer C. Abrasive wear of high speed steels: influence of abrasive particles and primary carbides on wear resistance. Tribol Int 36 (2003) 765-770
33. Pagounis E., and Lindroos V.K. Processing and properties of particulate reinforced steel matrix composites. Mater Sci Eng A 246 (1998) 221-234
34. Badisch E., and Kirchgaßner M. Influence of welding parameters on microstructure and wear behaviour of a typical NiCrBSi hardfacing alloy reinforced with tungsten carbide. Surf Coat Technol 202 (2008) 6016-6022
35. Kim H.J., and Kweon Y.G. The effects of retained austenite on dry sliding wear behavior of carburized steels. Wear 193 (1996) 8-15