Processing and properties of particulate reinforced steel matrix composites

Materials Science and Engineering: A

Volumn 246, Issue 1-2, 1998, Pages 221-234

  Pagounis, E ^a   Lindroos, V K ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Corrosion properties; HIP; Mechanical properties; Stainless steel; Steel matrix composites; Tool steel

Indexed keywords

CERAMIC MATERIALS; CORROSION RESISTANCE; DUCTILITY; HOT ISOSTATIC PRESSING; INTERFACES (MATERIALS); PROCESSING; STAINLESS STEEL; STIFFNESS; TENSILE STRENGTH; TOOL STEEL; TOUGHNESS; WEAR RESISTANCE;

REINFORCEMENT DISTRIBUTION; STEEL MATRIX COMPOSITE; STIFFNESS TO WEIGHT RATIO;

METALLIC MATRIX COMPOSITES;

EID: 0032073421     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0921-5093(97)00710-7     Document Type: Article

References (60)

1. McDanels D.L. Metall. Trans. A. 16A:1985;1105.
2. Ibrahim I.A., Mohamed F.A., Lavernia E.J. J. Mater. Sci. 26:1991;1137.
3. Lloyd D.J. Int. Mater. Rev. 39:1994;1.
4. Luo A. Metall. Mater. Trans. A. 26A:1995;2445.
5. Kattamis T.Z., Suganuma T. Mater. Sci. Eng. A. A128:1990;241.
6. Vardavoulias M., Jouanny-Tresy C., Jeandin M. Wear. 165:1993;141.
7. U. Bryggman, J.O. Lindqvist, in: J.M. Capus, R.M. German (Eds.), Advances in Powder Metallurgy and Particulate Materials, vol. 6, MPIF, Princeton, NJ, 1992, p. 185.
8. Mukherjee S.K., Upadhyaya G.S. Mater. Sci. Eng. 75:1985;67.
9. Haimi E., Talvitie M., Ristolainen E.O., Lindroos V.K. Scr. Metall. Mater. 30:1994;1333.
10. Lal S., Upadhyaya G.S. Powder Metall. Int. 20:1988;35.
11. Pagounis E., Haimi E., Pietikäinen J., Talvitie M., Vahvaselkä S., Lindroos V.K. Scr. Mater. 34:1996;407.
12. Pagounis E., Talvitie M., Lindroos V.K. Metall. Mater. Trans. A. 27A:1996;4171.
13. Pagounis E., Talvitie M., Lindroos V.K. Metall. Mater. Trans. A. 27A:1996;4183.
14. Pagounis E., Talvitie M., Lindroos V.K. Comp. Sci. Technol. 56:1996;1329.
15. Pagounis E., Talvitie M., Lindroos V.K. Powder Metall. 40:1997;55.
16. J.M. Panchal, T. Vela, T. Robisch, in: J. Masounave, F.G. Hamel (Eds.), Fabrication of Particulates Reinforced Metal Composites, ASM International, Montreal, 1990, p. 245.
17. Mukherjee S.K., Upadhyaya G.S. Corros. Sci. 25:1985;463.
18. Mukherjee S.K., Upadhyaya G.S. Oxid. Met. 23:1985;177.
19. Friend C.M. Mater. Sci. Tech. 5:1989;1.
20. R. Qvarfort, E. Alfonsson, in: Proc. 11th Scandinavian Corrosion Congress, Stavanger, Norway, June 1989, Högskolecentret Rogaland, Paper No. F-79.
21. Pagounis E., Talvitie M., Lindroos V.K. Mater. Res. Bull. 31:1996;1277.
22. Vedani M., Gariboldi E., Silva G., DiGregorio C. Mater. Sci. Tech. 10:1994;132.
23. L. Pauling, The Nature of the Chemical Bond, 2nd ed., Cornell University Press, New York, NY, 1948, p. 69.
24. Fischmeister H.F., Navara E., Easterling K.E. Met. Sci. J. 6:1972;211.
25. Howe J.M. Int. Mater. Rev. 38:1993;233.
26. Seilstorfer H. Powder Metall. Int. 16:1984;268.
27. Naidich Yu.V. Prog. Surf. Membr. Sci. 14:1981;353.
28. J. Kübarsepp, Ph.D. Thesis, Tallinn Technical University, Tallinn, 1992.
29. Bolton J.D., Youseffi M. Powder Metall. 36:1993;142.
30. Ratnaparkhi P.L., Howe J.M. Acta Metall. Mater. 42:1994;811.
31. N. Petersen, in: N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, A.S. Pedersen, O.B. Pedersen, B. Ralph (Eds.), MMCs: Processing, Microstructure and Properties, Riso National Laboratory, Riso, Denmark, 1991, p. 581.
32. F.J. Humphreys, A. Basu, M.R. Djazeb, in: N. Hansen, D. Juul Jensen, T. Leffers, H. Lilholt, T. Lorentzen, A.S. Pedersen, O.B. Pedersen, B. Ralph (Eds.), MMCs: Processing, Microstructure and Properties, Riso National Laboratory, Riso, Denmark, 1991, p. 51.
33. Nardone V.C, Prewo K.M. Scr. Metall. 20:1986;43.
34. Arsenault R.J., Shi N. Mater. Sci. Eng. 81:1986;175.
35. Bonollo F., Guerriero R., Sentimenti E., Tangerini I., Yang W.L. Mater. Sci. Eng. A. A144:1991;303.
36. Manoharan M., Lewandowski J.J. Acta Metall. Mater. 38:1990;489.
37. Kamat S.V., Hirth J.P., Mehrabian R. Acta Metall. 37:1989;2395.
38. Niklas A., Froyen L., Delaey L., Buekenhout L. Mater. Sci. Eng. A. A135:1991;225.
39. Geiger A.L., Walker J.A. J. Met. 43(8):1991;8.
40. Singh P.M., Lewandowski J.J. Metall. Trans. A. 24A:1993;2531.
41. Corbin S.F., Wilkinson D.S. Acta Metall. Mater. 42:1994;1329.
42. Bendixen J., Mortensen A. Scr. Metall. Mater. 25:1991;1917.
43. Mummery P., Derby B. Mater. Sci. Eng. A. A135:1991;221.
44. Wallen B., Liljas M., Stenvall P. Mater. Des. 13:1992;329.
45. Nilsson J.O. Mater. Sci. Tech. 8:1992;685.
46. Pagounis E., Lindroos V.K. Scr. Mater. 37:1997;65.
47. D.A. Jones, in: D. Johnston (Ed.), Principles and Prevention of Corrosion, Macmillan, London, 1992.
48. K.H. Zum Gahr, Microstructure and Wear of Materials, Tribology Series, vol. 10, Elsevier, Amsterdam, 1987.
49. Torralba J.M., Cambronero L.E.G., Ruiz-Prieto J.M., dasNeves M.M. Powder Metall. 36:1993;55.
50. Soylu B., Honeycombe R.W.K. Mater. Sci. Tech. 7:1991;137.
51. Hunt W.H. Jr., Osman T.M., Lewandowski J.J. J. Met. 45(1):1993;30.
52. Faber K.T., Evans A.G. Acta Metall. 31:1983;565.
53. Flom Y., Arsenault R.J. Acta Metall. 37:1989;2413.
54. Hahn G.T., Rosenfield A.R. Metall. Trans. A. 6A:1975;653.
55. LeRoy G., Embury J.D., Edwards G., Ashby M.F. Acta Metall. 29:1981;1509.
56. Stephens J.J., Lucas J.P., Hosking F.M. Scr. Metall. 22:1988;1307.
57. Davidson D. Metall. Trans. A. 22A:1991;113.
58. D.L. Davidson, in: R.K. Everett, R.J. Arsenault (Eds.), Metal Matrix Composites: Mechanisms and Properties, Academic Press, New York, 1991, p. 217.
59. Jones R.H., Lavender C.A., Smith M.T. Scr. Metall. 21:1987;1565.
60. Khruschov M.M. Wear. 28:1974;69.