Tribological properties of LDPE + Boehmite composites

Polymer Composites

Volumn 31, Issue 3, 2010, Pages 417-425

  Brostow, Witold ^a   Datashvili, Tea ^a   Kao, David ^a   Too, Jonathan ^a  

^a UNIVERSITY OF NORTH TEXAS   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FILLER ADDITION; FILLER CONCENTRATION; FRICTION VALUES; HIGHER YIELD; INTERFACIAL ADHESIONS; MATRIX; MICROSCRATCHES; PENETRATION DEPTH; PIN-ON-DISK TRIBOMETERS; SILANE COUPLING AGENT; SLIDING WEAR; TRIBOLOGICAL PROPERTIES; VISCOELASTIC RECOVERY;

COUPLING AGENTS; FILLERS; FRICTION; GRAFTING (CHEMICAL); HYSTERESIS MOTORS; SCANNING ELECTRON MICROSCOPY;

TRIBOLOGY;

EID: 76949084546     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.20820     Document Type: Article

References (62)

1. T.G. Mezger, The Rheology Handbook, Ulrich Zorll, Eds., Vincentz Verlag, Hannover (2002).
2. A.V. Shenoy, Rheology of Filler Polymer Systems, Kluwer Academic, London (1999).
3. W. Brostow, Failure of Plastics, Hanser, New York Chapter 10 (1992).
4. R.A. Baker, L.L. Koller, and P.E. Kummer, Handbook of fillers for plastics, 2nd ed., Van Nostrand Reinhold, New York (1987).
5. E. Miller, Introduction to Plastics and Composites, Marcel Dekker, New York (1996).
6. W. Brostow, Ed., Performance of Plastics, Hanser, Munich (2000).
7. Z. Roslaniec, G. Broza, and K. Schulte, Compos. Interfac., 10, 95 (2003).
8. W. Brostow and R. Simões, J. Mater. Ed., 27, 19 (2005).
9. W. Brostow and T. Datashvili, Mater. Res. Innovat., 11, 127 (2007).
10. Q. Wang, J. Xu, W. Shen, and W. Liu, Wear, 196, 82 (1996).
11. H. Yazdani, J. Morshedian, and H.A. Khonakdar, Polym. Compos., 27, 614 (2006).
12. S. Ahmed and F.R. Jones, J. Mater. Sci., 25, 4933 (1990).
13. W. Brostow, T. Datashvili, and B. Huang, Polym. Eng. Sci., 48, 292 (2008).
14. H.F. Mark, J. Mater. Ed., 12, 65 (1990).
15. C.J. Schwartz and S. Bahadur, Wear, 237 (2000).
16. C. Saujanya and S.J. Radhakrishnan, J. Mater. Sci., 35, 2319 (2000).
17. F. Li, K. Hu, J. Li, and B. Zhao, Wear, 249, 877 (2002).
18. W. Brostow, M. Kaselman, I. Mironi-Harpaz, M. Narkis, and R. Peirce, Polymer, 46, 5058 (2005).
19. W. Brostow, T. Datashvili, B. Huang, and J. Too, Polym. Compos., 29, (2008).
20. H. Schmidt, Mater. Res. Soc. Symp. Proc., 32, 327 (1984).
21. B. Bilyeu, W. Brostow, L. Chudej, M. Estevez, H.E. Hagg Lobland, J.R. Rodriguez, and S. Vargas, Mater. Res. Innovat., 11, 181 (2007).
22. W. Brostow, M. Estevez, H.E. Hagg Lobland, L. Hoang, J.R. Rodriguez, and S. Vargas, J. Mater. Res., 23, 1587 (2008).
23. M. Zhao and P. Liu, Mater. Res. Innovat., 11, 32 (2007).
24. D.M. Bielinski, O. Dobrowolski, and L. Slusarski, Polimery, 52, 546 (2007).
25. L.F. Giraldo, W. Brostow, E. Deveux, B.L. Lopez, and L.D. Perez, J. Nanosci. Nanotechnol., 8, 3176 (2008).
26. T. Werne and T.E. Patten, J. Am. Chem. Soc., 121, 7409 (1999).
27. M.Z. Rong, M.Q. Zhang, Y.X. Zheng, H.M. Zeng, and K. Friedrich, Polymer, 42, 3301 (2001).
28. P.H. Nam, P. Maiti, M. Okamoto, T. Kotaka, N. Hasegawa, and A. Usuki, Polymer, 42, 9633 (2001).
29. A. Bismarck and E. Schulz, J. Mater. Sci., 38, 4965 (2003).
30. K. Haibach, A. Menner, A. Bismarck, and R. Powell, Polymer, 47, 4513 (2006).
31. A. Bismarck, D. Richter, and C. Wuertz, J. Adhes., 73, 19 (2000).
32. I. Aranberri-Askargorta, T. Lampke, and A. Bismarck, J. Colloid Interface Sci., 263, 580 (2003).
33. A. Kopczynska and G.W. Ehrenstein, J. Mater. Ed., 29, 325 (2007).
34. J. Karger-Kocsis, Polypropylene: An A-Z Reference, Kluwer, Dordrecht (1999).
35. Z.H. Liu, K.W. Kwok, R.K.Y. Li, and C.L. Choy, Polymer, 43, 2501 (2002).
36. M. Harpaz and M. Narkis, Polym. Eng. Sci., 41, 2 (2001).
37. O. Breuer, A. Tzur, M. Narkis, and A. Siegmann, J. Appl. Polym. Sci., 74, 1731 (1999).
38. M. Narkis, A. Ram, and Z. Stein, J. Appl. Polym. Sci., 25, 1515 (1980).
39. M. Narkis and A. Vaxman, J. Appl. Polym. Sci., 29, 1639 (1984).
40. M. Narkis, I. Raiter, S. Shkolnik, and A. Siegmann, J. Macromol. Sci. Phys., 26, 37 (1987).
41. M.A. Osman, A. Atallah, and U.W. Suter, Polymer, 45, 1177 (2004).
42. W. Brostow, T. Datashvili, and K.P. Hackenberg, e-Polymers, no.054 (2008).
43. G. Martinez-Barrera, M.E. Espinosa-Pesqueira, and W. Brostow, e-Polymers, no.083 (2007).
44. N. Tsubokawa and S. Yoshikawa, J. Polym. Sci., 33, 551 (1995).
45. M.Z. Rong, M.Q. Zhang, H.B. Wang, and H.M. Zeng, Appl. Surf. Sci., 200, 76 (2002).
46. N. Tsubokawa, A. Kogure, and Y. Sone, J. Polym. Sci., 28, 1923 (1995).
47. O.W. Webster, Science, 251, 887 (1991).
48. E.P. Plueddemann, Silane Coupling Agents, Plenum, New York (1982).
49. M.Z. Rong, M.Q. Zhang, Y.X. Zheng, H.M. Zeng, R. Walter, and K. Friedrich, J. Mater. Sci. Lett., 19 (2000).
50. M.Z. Rong, Q.L. Ji, M.Q. Zhang, and K. Friedrich, Eur. Polym. J., 38, 1573 (2002).
51. B.M. Badran, A. Galeski, and M. Kryszewski, J. Appl. Polym. Sci., 27, 3669 (1982).
52. B. Pukánszky, "Particulate-filled polypropylene: Structure and properties," in Polypropylene: Structure, blends and composites, J. Karger-Kocsis, Ed., Chapman & Hall, London, Chapter 1 (1995).
53. Q.L. Ji, M.Z. Rong, M.Q. Zhang, and K. Friedrich, Polym. Polym. Compos., 10, 531 (2002).
54. W. Brostow and T. Datashvili, Chem. Chem. Technol., 2, 27 (2008).
55. W. Brostow, H.E. Hagg Lobland, and M. Narkis, J. Mater. Res., 21, 9 (2006).
56. W. Brostow, B. Bujard, P.E. Cassidy, H.E. Hagg, and P.E. Montemartini, Mater. Res. Innovat., 6, 7 (2001).
57. W. Brostow, J.L. Deborde, M. Jaklewicz, and P. Olszynski, J. Mater. Ed., 25, 119 (2003).
58. W. Brostow, G. Damarla, J. Howe, and D. Pietkiewicz, e-Polymers, no.025 (2004).
59. M.D. Bermudez, W Brostow, F.J. Carrion-Vilches, J.J. Cervantes, and D. Pietkiewicz, e-Polymers, no.001 (2005).
60. M.D. Bermudez, W. Brostow, F.J. Carrion-Vilches, J.J. Cervantes, G. Damarla, and J.M. Perez, e-Polymers, no.003 (2005).
61. W. Brostow and H.E. Hagg Lobland, Polym. Eng. Sci., 48, 1982 (2008).
62. B.J. Briscoe and T.A.I. Stolarski, "Wear of Polymers in the Pin-on-Disk Configuration," in Polymer Wear and its Control, L.H. Lee, Ed., American Chemical Society, Washington (1985).