Use of coupled multi-electrode arrays to advance the understanding of selected corrosion phenomena

Journal of ASTM International

Volumn 4, Issue 10, 2007, Pages

  Cong, H ^a   Bocher, F ^a   Budiansky, N D ^b   Hurley, M F ^c   Scully, J R ^a  

^a UNIVERSITY OF VIRGINIA   (United States)

^b EXPONENT INC   (United States)

^c Boise State University   (United States)

Author keywords

Carbon steel; Copper; Corrosion in concrete; Coupled multi electrode array; Crevice corrosion; Intergranular corrosion; Pitting corrosion; Stainless steel

Indexed keywords

CORROSION DAMAGE; CORROSION PHENOMENA; CORROSION PROPERTY; CORROSION SITES; CREVICE CORROSION; ELECTRODE ARRAYS; ELECTRODE CONFIGURATIONS; HIGH THROUGHPUT EXPERIMENTS; INTERGRANULAR CORROSION; MULTIELECTRODE ARRAYS; PITTING CORROSION; STATISTICAL DISTRIBUTION; TEMPORAL INFORMATION;

CARBON STEEL; ELECTROCHEMICAL CORROSION; ELECTRODES; PITTING; TEXTURES;

STAINLESS STEEL;

EID: 76749161061     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI101248     Document Type: Conference Paper

References (68)

1. Isaacs, H. S., "The Effect of Height on the Current Distribution Measured with a Vibrating Electrode Probe," J. Electrochem. Soc., Vol.138, No.3, 1991, pp. 722-728.
2. Budiansky, N. D., Hudson, J. L., and Scully, J. R., "Origins of Persistent Interactions Among Localized Corrosion Sites," Symposium in Honor of Hans Bohni, PV2002-24, 133-146, Electrochemical Society, Salt Lake City, UT, 2002, pp. 133-146.
3. Budiansky, N. D., Hudson, J. L., and Scully, J. R., "Origins of Persistent Interactions Among Localized Corrosion Sites on Stainless Steel," J. Electrochem. Soc., Vol.151, No.4, 2004, pp. B233-B243.
4. [4] Lunt, T. T., Scully, J. R., Brusamarello, V., Mikhailov, A. S., and Hudson, J. L., "Spatial Interactions Among Localized Corrosion Sites. Experiments and Modeling," J. Electrochem. Soc., Vol.149, No.5, 2002, pp. B163-B173. (Pubitemid 34599574)
5. Lunt, T. T., Pride, S. T., Scully, J. R., Hudson, J. L., and Mikhailov, A. S., "Cooperative Stochastic Behavior in Localized Corrosion. II. Experiments," J. Electrochem. Soc., Vol.144, No.5, 1997, pp. 1620-1629.
6. [6] Lunt, T. T., Brusamarello, V., Scully, J. R., and Hudson, J. L., "Interactions Among Localized Corrosion Sites Investigated with Electrodes Array," Electrochem. Solid-State Lett., Vol.3, No.6, 2000, pp. 271-274. (Pubitemid 30878847)
7. Lucey, V. F., "Developments Leading to the Present Understanding of the Mechanisms of Pitting Corrosion of Copper," Br. Corros. J., London, Vol.7, 1972, pp. 36-41.
8. Tan, Y., "The Effects of Inhomogeneity in Organic Coatings on Electrochemical Measurements Using a Wire Beam Electrode. Part I," Prog. Org. Coat., Vol.19, 1991, pp. 89-94.
9. Tan, Y., "Wire Beam Electrode: A New Tool for Localized Corrosion Studies," Australian Corrosion Association Corrosion and Prevention 97, Paper No. 52, Australian Corrosion Association, Australia, 1997.
10. [10]Tan,Y.," MonitoringLocalizedCorrosionProcessesandEstimatingLocalizedCorrosion RatesUsingaWireBeamElectrode,"Corrosion(Houston),Vol.54,No.5,1998,403-413. (Pubitemid128478754)
11. Tan, Y. and Shiti, Y., "The Effects of Inhomogeneity in Organic Coatings on Electrochemical Measurements Using a Wire Beam Electrode. Part II," Prog. Org. Coat., Vol.19, 1991, pp. 257-263. (Pubitemid 21733383)
12. Tan, Y.-J., "A Novel Crevice Corroison Experiment Using a Wire Beam Electrode," The Journal of Corrosion Science and Engineering, Vol.1, Paper 17, 1999.
13. Tan, Y.-J., "A New Crevice Corrosion Testing Method and Its Use in the Investigation of Oil Stain," Corros. Sci., Vol.50, No.4, 1994, pp. 266-269.
14. [14] Tan, Y.-J., Bailey, S., Kinsella, B., and Lowe, A., "Mapping Corrosion Kinetics Using the Wire Beam Electrode in Conjunction with Electrochemical Noise Resistance Measurements," J. Electrochem. Soc., Vol., 147, No.2, 2000, pp. 530-539. (Pubitemid 30568464)
15. [15] Tan, Y.-J., Bailey, S., and Kinsella, B., "Mapping Non-Uniform Corrosion Using the Wire Beam Electrode Method. Crevice, II, Corrosion and Crevice Corrosion Exemption," Corros. Sci., Vol.43, 2001, pp. 1919-1929. (Pubitemid 32812316)
16. [16] Tan, Y-J., Bailey, S., and Kinsella, B., "Mapping Non-Uniform Corrosion Using the Wire Beam Electrode Method. Water, III. Line Corrosion," Corros. Sci., Vol.43, 2001, pp. 1931-1937. (Pubitemid 32812317)
17. [17] Tan, Y.-J., Bailey, S., and Kinsella, B., "Mapping Non-Uniform Corrosion Using the Wire Beam Electrode Method. Multiphase, I. Carbon Dioxide Corrosion," Corros. Sci., Vol.43, 2001, pp. 1905-1918. (Pubitemid 32812315)
18. Wang, W., Kiss, I. Z., and Hudson, J. L., "Experiments on Arrays of Globally Coupled Chaotic Electrochemical Oscillators: Synchronization and Clustering," Chaos, Vol.10, No.1, 2000, pp. 248-256.
19. Wang, S. S., "Microelectrode Arrays for Lubrication Studies," J. Electrochem. Soc., Vol.136, No.3, 1989, pp. 713-715.
20. Zhang, S., Shibata, T., and Haruna, T., "Inhibition Effect of Metal Cations to Intergranular Stress Corrosion of Sensitized Stainless Steel," Corros. Sci., Vol.47, 2005, pp. 1049-1061.
21. [21] Zhong, Q., "Study of Corrosion Behavior of Mild Steel and Copper in Thin Film Salt Solution Using the Wire Beam Electrode," Corros. Sci., Vol.44, 2002, pp. 909-916. (Pubitemid 34170171)
22. Bard, A. J., Fan, F.-R. F., Kwak, J., and Lev, O., "Scanning Electrochemical Microscopy: Introduction and Principles," Anal. Chem., Vol.61, No.2, 1989, p. 132.
23. Lister, T. E., Glenn, A. W., and Pinhero, P. J., "Mapping Corrosion in Real-Time, Development of the Microelectrode Array Microscope," Corrosion/2004, Paper No. 04445, Houston, TX, NACE International, 2004.
24. [24] Shibata, T. and Zhu, Y.-C., "The Effects of Film Formation Potential on the Stochastic Processes of Pit Generation on Anodized Titanium," Corros. Sci., Vol.36, No.1, 1994, pp. 153-163. (Pubitemid 275020)
25. 5 Alloys that Retain the Localized Corrosion Resistance of the Amorphous State," Electrochem. Solid-State Lett., Vol.2, No.6, 1999, pp. 267-270.
26. Frankel, G. S., "The Growth of 2-D Pits in Thin Film Aluminum," Corros. Sci., Vol.30, No.12, 1990, pp. 1203-1218.
27. Galvele, J. R., "Transport Processes and the Mechanism of Pitting of Metals," J. Electrochem. Soc., Vol.123, No.4, 1976, pp. 464-474.
28. Newman, J., "Current Distribution on a Rotating Disk Below the Limiting Current," J. Electrochem. Soc., Vol.113, No.12, 1966, p. 1235.
29. Butler, G., Ison, C. K., and Mercer, A. D., "Some Important Aspects of Corrosion in Central Heating Systems," Br. Corros. J., London, Vol.6, 1971, pp. 31-38.
30. Carslaw, H. S. and Jaeger, J. C., Conduction of Heat in Solids, Oxford University Press, New York, 1978.
31. [31] Organ, L., Scully, J. R., Mikhailov, A. S., and Hudson, J. L., "A Spatiotemporal Model of Interactions Among Metastable Pits and the Transition to Pitting Corrosion," Electrochim. Acta, Vol.51, No.2, 2005, pp. 225-241. (Pubitemid 41406243)
32. [32] Fernandes, P., "Type I Pitting of Copper Tubes from a Water Distribution System," Eng. Failure Anal., Vol.5, No.1, 1998, pp. 35-40. (Pubitemid 28393120)
33. Edwards, M., "The Pitting Corrosion of Copper," Journal of the American Water Works Association, Vol.7, 1994, pp. 74-90.
34. [34] Fujii, T., "The Effect of Water Quality on Pitting Corrosion of Copper Tube in Hot Soft Water," Corros. Sci., Vol.24, No.10, 1984, pp. 901-912. (Pubitemid 15435995)
35. [35] Feng, Y., "The Corrosion Behavior of Copper in Neutral Tap Water. Part I: Corrosion Mechanisms," Corros. Sci., Vol.38, No.3, 1996, pp. 369-385. (Pubitemid 126402731)
36. Bentour, A., Diamond, S., and Berke, N. S., Steel Corrosion in Concrete, E & FN Spon; an imprint of Chapman & Hall, London, 2-6 Boundary Row, London SE1 8HN, UK, 1997.
37. Tuutti, K., Corrosion of Steel in Concrete, Swedish Cement and Concrete Research Institute, Stockholm, 1982.
38. Hurley, M. F. and Scully, J. R., "Threshold Chloride Levels of Selected Corrosion Resistant Rebar Materials Compared to Carbon Steel," Corrosion (Houston), Vol.62, No.10, 2006, pp. 892-904.
39. Torres-Acosta, A. A. and Sagues, A. A., "Concrete Cover Cracking with Localized Corrosion of Reinforcing Steel," 5th CANMET/ACI, ACI International, Barcelona, Spain, 2000, pp. 591-612.
40. ASTM Standard G 78-01, "Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments," Vol.3, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2003.
41. ASTM Standard G61-86, "Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys," Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, Vol.3, 2003.
42. Tsujikawa, S., "Critical Depth for Initiation of Growing Crevice Corrosion", Critical Factors in Localized Corrosion, ECS Meeting, PV 92-9, The Electrochemical Society, Phoenix, AZ, 1991.
43. Kehler, B. A. and Scully, J. R., "Role of Metastable Pitting in Crevices on Crevice Corrosion Stabilization in Alloys 625 and 22," Corrosion (Houston), Vol.61, No.7, 2005, pp. 665-684.
44. Lee, J. S., Reed, M. L., and Kelly, R. G., "Combining Rigorously Controlled Crevice Geometry and Computational Modeling for Study of Crevice Corrosion Scaling Factors," J. Electrochem. Soc., Vol.151, No.7, 2004, pp. B423-B433.
45. [45]Kowal,K.,DeLuccia,J.,Josefowicz,J.Y.,Laird,C.,andFarrington,G.C., "InSituAtomicForceMicroscopyObservationsoftheCorrosionBehaviorofAluminum- CopperAlloys,"J.Electrochem.Soc.,Vol.143,No.8,1996,2471-2481. (Pubitemid126597462)
46. Guillaumin, V. and Mankowski, G., "Influence of Overaging Treatment on Localized Corrosion of A1 6056," Corrosion (Houston), Vol.56, No.1, 2000, pp. 12-23.
47. Sedriks, A. J., Corrosion of Stainless Steels, T. E. Society, Ed., A Wiley-Interscience Publication, John Wiley & Sons, Inc., Princeton, NJ, 1996, pp. 242-266.
48. Connolly, B. J. and Scully, J. R., "The Transition from Localized Corrosion to SCC in an Al-Li-Cu-Ag Alloy," Corrosion 2002, Paper No. 02434, NACE, 2002.
49. Osozawa, K., Bohnenkamp, K., and Engell, H. J., "Potentiostatic Study on the Intergranular Corrosion of an Austenitic Chromium-Nickel Stainless Steel," Corros. Sci., Vol.6, 1966, pp. 421-433.
50. Osozawa, K. and Engell, H. J., "The Anodic Polarization Curves of Iron-Nickel-Chromium Alloys," Corros. Sci., Vol.6, 1966, pp. 389-393.
51. Kaesche, H., Metallic Corrosion, National Associate of Corrosion Engineers, 1985, p. 248.
52. Basiouny, M. S. and Haruyama, S., "The Polarization Behavior of Fe-Cr Alloys in Acidic Sulfate Solutions in the Active Region," Corros. Sci., Vol.16, 1976, pp. 529-540.
53. Gaudett, M. A. and Scully, J. R., "Distributions of Cr Depletion Levels in Sensitized AISI 304 Stainless Steel and Its Implications Concerning Intergranular Corrosion Phenomena," J. Electrochem. Soc., Vol.140, No.12, 1993, pp. 3425-3435.
54. Aoki, K., "Theory of Ultramicroelectrodes," Electroanalysis, Vol.5, 1993, pp. 627-639.
55. Goldman, M. E., "Amorphous Metallic Coatings with Tunable Corrosion Properties Based on Al-Co-Ce-(Mo) Alloy Compositions," Corrosion/2004, Paper 04276, NACE International, New Orleans, LA, 2004.
56. [56] Rushing, J. C. and Edwards, M., "Effect of Aluminium Solids and Chlorine on Cold Water Pitting of Copper," Corros. Sci., Vol.46, 2004, pp. 3069-3088. (Pubitemid 39300853)
57. Marshall, B., "Initiation, Propagation, and Mitigation of Aluminum and Chlorine Induced Pitting Corrosion," Master thesis at Virginia Tech, 2004.
58. Romanoff, M., Underground Corrosion, National Bureau of Standards, Washington, DC, 1957.
59. Hurley, M. F. and Scully, J. R., "Corrosion Resistant Reinforcement for Concrete Structures: Corrosion Propagation Behavior," Corrosion/2006, Paper No. 06340, NACE, San Diego, CA, 2006.
60. Kehler, B. A., Ilevbare, G. O., and Scully, J. R., "Crevice Corrosion Stabilization and Repassivation Behavior of Alloy 625 and Alloy 22," Corrosion (Houston), Vol.58, No.12, 2001, pp. 1042-1065.
61. Kearns, J. R., "Crevice," Corrosion Tests and Standards: Application and Interpretation, R. Baboian, Ed., ASTM International, West Conshohocken, PA, 1995, p. 175.
62. Gui, F. and Kelly, R. G., "Characterization of Wicking and Wetting Ability of Corrosion Prevention Compounds," ECS Meeting, PV 2004-14, The Electrochemical Society, Honolulu, HI, 2004.
63. Wichman, C. S. and Scully, J. R., "Determining a Suitable Environment for the Investigation of Intergranular Corrosion Propagation by Interactions Between Sensitized Grain Boundaries," Thesis Report, University of Virginia, Charlottesville, VA, 2003.
64. Shibata, T. and Takeyama, T., "Stochastic Theory of Pitting," Corrosion (Houston), Vol.33, No.7, 1977, pp. 243-251.
65. Pourbaix, M., "Some Applications of Potential-pH Diagrams to the Study of Localized Corrosion," J. Electrochem. Soc., Vol.132, No.2, 1976, pp. 25C-36C.
66. Budiansky, N. D., "Origins of Persistent Interactions Among Localized Corrosion Sites Investigated Using Experimental Electrode Arrays," M.S. Thesis, University of Virginia, 2003, 215 pp.
67. Dobbelarr, J. A. L., Herman, E. C. M., and De Wit, J. H. W., "The Corrosion Behavior of Iron Chromium Alloys in 0.05 M Sulphuric Acid," Corros. Sci., Vol.33, No.5, 1992, pp. 765-778.
68. Keddam, M., Mattos, O. R., and Takenouti, H., "Mechanisms of Anodic Dissolution of Iron-Chromium Alloys Investigated by Electrode Impedances-I. Experimental Results and Reaction Model," Electrochim. Acta, Vol.31, No.9, 1986, pp. 1147-1158.