Preparation and evaluation of dental resin luting agents with increasing content of bisphenol-A ethoxylated dimethacrylate

Journal of Biomaterials Applications

Volumn 24, Issue 5, 2010, Pages 453-473

  Moraes, Rafael R ^a   Sinhoreti, Mário A C ^a   Correr Sobrinho, Lourenço ^a   Ogliari, Fabrício A ^b   Piva, Evandro ^b   Petzhold, Cesar L ^c  

^a UNIVERSITY OF CAMPINAS   (Brazil)

^b FEDERAL UNIVERSITY OF PELOTAS   (Brazil)

^c FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

Author keywords

Degree of conversion; Dimethacrylates; Elastic modulus; Hardness; Mechanical properties; Resin cements; Water sorption solubility.

Indexed keywords

BIS-GMA; BISPHENOL A; DEGREE OF CONVERSION; DENTAL RESINS; DIAMETRAL TENSILE STRENGTH; DIMETHACRYLATES; KNOOP HARDNESS; RESIN CEMENT; RESIN CEMENTS; TRIETHYLENE GLYCOL DIMETHACRYLATE; WATER SORPTION; YOUNG'S MODULUS;

ACRYLIC MONOMERS; CEMENTS; DENTAL CEMENT; ELASTIC MODULI; GAS METAL ARC WELDING; GLYCOLS; HARDNESS; PHENOLS; REGRESSION ANALYSIS; RESINS; SORPTION; TENSILE STRENGTH;

MECHANICAL PROPERTIES;

2,2 BIS (4 (2 METHACRYLOXYETHOXY)PHENYL)PROPANE; 2,2-BIS-(4-(2-METHACRYLOXYETHOXY)PHENYL)PROPANE; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; POLYMETHACRYLIC ACID DERIVATIVE; RESIN CEMENT; TRIETHYLENE GLYCOL DIMETHACRYLATE; WATER;

ARTICLE; CHEMICAL STRUCTURE; CHEMISTRY; DENTAL SURGERY; EVALUATION; HARDNESS; IN VITRO STUDY; INFRARED SPECTROSCOPY; MATERIALS TESTING; SOLUBILITY; SYNTHESIS; TENSILE STRENGTH; YOUNG MODULUS;

BISPHENOL A-GLYCIDYL METHACRYLATE; DENTAL RESTORATION, PERMANENT; ELASTIC MODULUS; HARDNESS; MATERIALS TESTING; METHACRYLATES; MOLECULAR STRUCTURE; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SOLUBILITY; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; TENSILE STRENGTH; WATER;

EID: 76649118763     PISSN: 08853282     EISSN: 15308022     Source Type: Journal    
DOI: 10.1177/0885328208098594     Document Type: Article

References (36)

1. Pazin, M.C., Moraes, R.R., Goncalves, L.S., Borges, G.A., Sinhoreti, M.A. and Correr-Sobrinho, L. (2008). Effects of Ceramic Thickness and Curing Unit on Light Transmission through Leucite-Reinforced Material and Polymerization of Dual-Cured Luting Agent, J. Oral Sci., 50 (2). 131-136.
2. Reges, R.V., Moraes, R.R., Correr, A.B., Sinhoreti, M.A., Correr-Sobrinho, L., Piva, E. and Nouer, P.R. (2008). In-Depth Polymerization of Dual-Cured Resin Cement Assessed by Hardness, J. Biomater. Appl., 23 (1). 85-96.
3. Rosenstiel, S.F., Land, M.F. and Crispin, B.J. (1998). Dental Luting Agents: A Review of the Current Literature, J. Prosthet. Dent., 80 (3). 280-301.
4. Anseth, K.S., Goodner, M.D., Reill, M.A., Kannurpatti, A.R., Newman, S.M. and Bowman, C.N. (1996). The Influence of Comonomer Composition on Dimethacrylate Resin Properties for Dental Composites, J. Dent. Res., 75 (8). 1607-1612.
5. Dulik, D., Bernier, R. and Brauer, G.M. (1981). Effect of Diluent Monomer on the Physical-Properties of Bis-GMA-Based Composites, J. Dent. Res., 60 (6). 983-989.
6. Goncalves, F., Pfeifer, C.S., Ferracane, J.L. and Braga, R.R. (2008). Contraction Stress Determinants in Dimethacrylate Composites, J. Dent. Res., 87 (4). 367-371.
7. Ogliari, F.A., Ely, C., Zanchi, C.H., Fortes, C.B., Samuel, S.M., Demarco, F.F., Petzhold, C.L. and Piva, E. (2008). Influence of Chain Extender Length of Aromatic Dimethacrylates on Polymer Network Development, Dent. Mater., 24 (2). 165-171.
8. Moraes, R.R., GonÇalves, L.S., Ogliari, F.A., Piva, E., Sinhoreti, M.A. and Correr-Sobrinho, L. (2008). Development of Dental Resin Luting Agents Based on Bis-EMA4: Bond Strength Evaluation, Express Polym. Lett., 2 (2). 88-92.
9. Sideridou, I., Tserki, V. and Papanastasiou, G. (2002). Effect of Chemical Structure on Degree of Conversion in Light-Cured Dimethacrylate-Based Dental Resins, Biomaterials, 23 (8). 1819-1829.
10. Sideridou, I.D. and Achilias, D.S. (2005). Elution Study of Unreacted Bis-GMA, TEGDMA, UDMA, and Bis-EMA from Light-Cured Dental Resins and Resin Composites Using HPLC, J. Biomed. Mater. Res. B Appl. Biomater., 74 (1). 617-626.
11. Sideridou, I.D., Achilias, D.S. and Karabela, M.M. (2006). Sorption Kinetics of Ethanol/Water Solution by Dimethacrylate-Based Dental Resins and Resin Composites, J. Biomed. Mater. Res. B Appl. Biomater., 81 (1). 207-218.
12. Kalachandra, S., Sankarapandian, M., Shobha, H.K., Taylor, D.F. and McGrath, J.E. (1997). Influence of Hydrogen Bonding on Properties of Bis-GMA Analogues, J. Mater. Sci. Mater. Med., 8 (5). 283-286.
13. Lemon, M.T., Jones, M.S. and Stansbury, J.W. (2007). Hydrogen Bonding Interactions in Methacrylate Monomers and Polymers, J. Biomed. Mater. Res. A, 83 (3). 734-746.
14. Asmussen, E. and Peutzfeldt, A. (1998). Influence of UEDMA, BisGMA and TEGDMA on Selected Mechanical Properties of Experimental Resin Composites, Dent. Mater., 14 (1). 51-56.
15. Deepa, C.S. and Krishnan, V.K. (2000). Effect of Resin Matrix Ratio, Storage Medium, and Time upon the Physical Properties of a Radiopaque Dental Composite, J. Biomater. Appl., 14 (3). 296-315.
16. Sideridou, I., Achilias, D.S. and Kyrikou, E. (2004). Thermal Expansion Characteristics of Light-Cured Dental Resins and Resin Composites, Biomaterials, 25 (15). 3087-3097. (Pubitemid 38210201)
17. Sideridou, I., Achilias, D.S., Spyroudi, C. and Karabela, M. (2004). Water Sorption Characteristics of Light-Cured Dental Resins and Composites Based on Bis-EMA/PCDMA, Biomaterials, 25 (2). 367-376. (Pubitemid 37329726)
18. Moraes, R.R., Brandt, W.C., Naves, L.Z., Correr-Sobrinho, L. and Piva, E. (2008). Light- and Time-Dependent Polymerization of Dual-Cured Resin Luting Agent beneath Ceramic, Acta Odontol. Scand., 66 (5). 257-261.
19. Ferracane, J.L. and Greener, E.H. (1986). The Effect of Resin Formulation on the Degree of Conversion and Mechanical Properties of Dental Restorative Resins, J. Biomed. Mater. Res., 20 (1). 121-131.
20. Lovell, L.G., Newman, S.M. and Bowman, C.N. (1999). The Effects of Light Intensity, Temperature, and Comonomer Composition on the Polymerization Behavior of Dimethacrylate Dental Resins, J. Dent. Res., 78 (8). 1469-1476.
21. Halvorson, R.H., Erickson, R.L. and Davidson, C.L. (2002). Energy Dependent Polymerization of Resin-Based Composite, Dent. Mater., 18 (6). 463-469.
22. Moraes, R.R., Correr-Sobrinho, L., Sinhoreti, M.A., Puppin-Rontani, R.M., Ogliari, F.A. and Piva, E. (2008). Light-Activation of Resin Cement through Ceramic: Relationship between Irradiance Intensity and Bond Strength to Dentin, J. Biomed. Mater. Res. B Appl. Biomater., 85 (1). 160-165.
23. Ferracane, J.L., Berge, H.X. and Condon, J.R. (1998). In Vitro Aging of Dental Composites in Water - Effect of Degree of Conversion, Filler Volume, and Filler/Matrix Coupling, J. Biomed. Mater. Res., 42 (3). 465-472.
24. Karmaker, A.C., Dibenedetto, A.T. and Goldberg, A.J. (1997). Extent of Conversion and its Effect on the Mechanical Performance of Bis-GMA/ PEGDMA-Based Resins and their Composites with Continuous Glass Fibres, J. Mater. Sci. Mater. Med., 8 (6). 369-374.
25. Schneider, L.F., Moraes, R.R., Cavalcante, L.M., Sinhoreti, M.A., Correr-Sobrinho, L. and Consani, S. (2008). Cross-Link Density Evaluation through Softening Tests: Effect of Ethanol Concentration, Dent. Mater., 24 (2). 199-203.
26. Jones, D.W. and Rizkalla, A.S. (1996). Characterization of Experimental Composite Biomaterials, J. Biomed. Mater. Res., 33 (2). 89-100.
27. Orefice, R.L., Discacciati, J.A.C., Neves, A.D., Mansur, H.S. and Jansen, W.C. (2003). In Situ Evaluation of the Polymerization Kinetics and Corresponding Evolution of the Mechanical Properties of Dental Composites, Polym. Test., 22 (1). 77-81.
28. Kawai, K., Iwami, Y. and Ebisu, S. (1998). Effect of Resin Monomer Composition on Toothbrush Wear Resistance, J. Oral Rehab., 25 (4). 264-268.
29. Sankarapandian, M., Shobha, H.K., Kalachandra, S., McGrath, J.E. and Taylor, D.F. (1997). Characterization of Some Aromatic Dimethacrylates for Dental Composite Applications, J. Mater. Sci. Mater. Med., 8 (8). 465-468.
30. Lee, J.H., Um, C.M. and Lee, I.B. (2006). Rheological Properties of Resin Composites According to Variations in Monomer and Filler Composition, Dent. Mater., 22 (6). 515-526.
31. Ferracane, J.L. (2006). Hygroscopic and Hydrolytic Effects in Dental Polymer Networks, Dent. Mater., 22 (3). 211-222.
32. Sideridou, I., Tserki, V. and Papanastasiou, G. (2003). Study of Water Sorption, Solubility and Modulus of Elasticity of Light-Cured Dimethacrylate-Based Dental Resins, Biomaterials, 24 (4). 655-665.
33. Elliott, J.E., Lovell, L.G. and Bowman, C.N. (2001). Primary Cyclization in the Polymerization of Bis-GMA and TEGDMA: A Modeling Approach to Understanding the Cure of Dental Resins, Dent. Mater., 17 (3). 221-229.
34. Rey, L., Duchet, J., Galy, J., Sautereau, H., Vouagner, D. and Carrion, L. (2002). Structural Heterogeneities and Mechanical Properties of Vinyl/ Dimethacrylate Networks Synthesized by Thermal Free Radical Polymerisation, Polym., 43 (16). 4375-4384.
35. International Standard Organization Specification 4049. (2000). Dentistry - Polymer-Based Filling, Restorative and Luting Materials, Geneva, Switzerland.
36. Asaoka, K. and Hirano, S. (2003). Diffusion Coefficient of Water through Dental Composite Resin, Biomaterials, 24 (6). 975-979.