Nanostructured Al-Zn-Mg-Cu alloy synthesized by cryomilling and spark plasma sintering

Transactions of Nonferrous Metals Society of China (English Edition)

Volumn 19, Issue 5, 2009, Pages 1110-1115

  CHEN, Han bin ^a   TAO, Kai ^b   YANG, Bin ^b   ZHANG, Ji shan ^b  

^a No59 Institute of China Ordnance Industry   (China)

^b UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING   (China)

Author keywords

cryomilling; microstructural evolution; nanostructured Al Zn Mg Cu alloy; second phase; spark plasma sintering

Indexed keywords

AL-ZN-MG-CU ALLOY; ALLOY POWDER; AVERAGE GRAIN SIZE; BULK MATERIALS; CRYOMILLING; EQUIAXED GRAINS; FACE-CENTERED CUBIC; FINE PARTICLES; MASS FRACTION; MATRIX; NANO-STRUCTURED; NANOSTRUCTURED ALLOY; NANOSTRUCTURED POWDERS; PHASE TRANSFORMATION; SECOND PHASE; SECOND PHASE PARTICLES; SOLID SOLUTION TREATMENT; SUB-MICRON PARTICLES; SUBMICRON;

ALLOYS; ALUMINUM; CRYSTALLIZATION; DISSOLUTION; ELECTRIC SPARKS; MICROSTRUCTURAL EVOLUTION; NANOSTRUCTURES; PLASMAS; SOLID SOLUTIONS; SOLIDIFICATION; SPARK PLASMA SINTERING; ZINC; ZINC ALLOYS;

COPPER ALLOYS;

EID: 76449098890     PISSN: 10036326     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1003-6326(08)60415-X     Document Type: Article

References (26)

1. WU Y.L., FROES F.H., ALVAREZ A., LI C.C., and LIU J. Microstructure and properties of a new super-high-strength Al-Zn-Mg-Cu alloy C912 [J]. Mater Des 18 (1997) 211-215
2. ENGDAHL T., HANSEN V., WARREN P.J., and STILLER K. Investigation of fine scale precipitates in Al-Zn-Mg alloys after various heat treatments [J]. Mater Sci Eng A 327 (2002) 59-64
3. SHA G., and CEREZO A. Early-stage precipitation in Al-Zn-Mg-Cu alloy (7050) [J]. Acta Mater 52 (2004) 4503-4516
4. CHEN K.-h., and HUANG L.-p. Strengthening-toughening of 7xxx series high strength aluminum alloys by heat treatment [J]. Trans Nonferrous Met Soc China 13 3 (2003) 484-490
5. SRIVATSAN T.S. An investigation of the cyclic fatigue and fracture behavior of aluminum alloy 7055 [J]. Mater Des 23 (2002) 141-151
6. WANG F., XIONG B., ZHANG Y., ZHANG Z., WANG Z., ZHU B., and LIU H. Microstructure and mechanical properties of spray-deposited Al-Zn-Mg-Cu alloy [J]. Mater Des 28 (2007) 1154-1158
7. JENABALI J.S.A. Creep behavior of spray-cast 7xxx aluminum alloy [J]. Mater Des 23 (2002) 169-172
8. de SANCTICS M. Structure and properties of rapidly solidified ultrahigh strength Al-Zn-Mg-Cu alloys produced by spray deposition [J]. Mater Sci Eng A 141 (1991) 103-121
9. KIM W.J., HIGASHI K., and KIM J.K. High strain rate superplastic behaviour of powder-metallurgy processed 7475Al+0.7Zr alloy [J]. Mater Sci Eng A 261 (1996) 170-177
10. ZHOU F., NUTT S.R., BAMPTON C.C., and LAVERNIA E.J. Nanostructure in an Al-Mg-Sc alloy processed by low-energy ball milling at cryogenic temperature [J]. Metall Mater Trans A 34 (2003) 1985-1992
11. ZHOU F., WITKIN D., NUTT S.R., and LAVERNIA E.J. Formation of nanostructure in Al produced by a low-energy ball milling at cryogenic temperature [J]. Mater Sci Eng A 375/377 (2004) 917-921
12. TELLKAMP V.L., and LAVERNIA E.J. Processing and mechanical properties of nanocrystalline 5083 Al alloy [J]. Nanostruct Mater 12 (1999) 249-252
13. LEE Z., WITKIN D.B., RADMILOVIC V., LAVERNIA E.J., and NUTT S.R. Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al-7.5Mg alloy [J]. Mater Sci Eng A 410/411 (2005) 462-467
14. PARK Y.S., CHUNG K.H., KIM N.J., and LAVERNIA E.J. Microstructural investigation of nanocrystalline bulk Al-Mg alloy fabricated by cryomilling and extrusion [J]. Mater Sci Eng A 374 (2004) 211-216
15. DOGAN C.P., RAWERS J.C., GOVIER R.D., and KORTH G. Mechanical processing, compaction, and thermal processing of [alpha]-Fe powder [J]. Nanostruct Mater 4 (1994) 631-644
16. GROZA J.R., and DOWDING R.J. Nanoparticulate materials densification [J]. Nanostruct Mater 7 (1996) 749-768
17. PAGOUNIS E., TALVITIE M., and LINDROOS V.K. Consolidation behavior of a particle reinforced metal matrix composite during HIPing [J]. Mater Res Bull 31 (1996) 1277-1285
18. WITKIN D.B., and LAVERNIA E.J. Synthesis and mechanical behavior of nanostructured materials via cryomilling [J]. Prog Mater Sci 51 (2006) 1-60
19. OMORI M. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS) [J]. Mater Sci Eng A 287 (2000) 183-188
20. YE J., AJDELSZTAJN L., and SCHOENUNG J.M. Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: Cryomilling and spark plasma sintering [J]. Metall Mater Trans A 37 (2006) 2569-2579
21. JIANG H.G., RUHLE M., and LAVERNIA E.J. On the applicability of the X-ray diffraction line profile analysis in extracting grain size and microstrain in nanocrystalline materials [J]. J Mater Res 14 (1999) 549-559
22. HUANG B., PEREZ R.J., LAVERNIA E.J., and LUTON M.J. Formation of supersaturated solid solutions by mechanical alloying [J]. Nanostruct Mater 7 (1996) 67-79
23. HUANG B., PEREZ R.J., and LAVERNIA E.J. Grain growth of nanocrystalline Fe-Al alloys produced by cryomilling in liquid argon and nitrogen [J]. Mater Sci Eng A 255 (1998) 124-132
24. PEREZ R.J., HUANG B., and LAVERNIA E.J. Thermal stability of nanocrystalline Fe-10 (mass fraction, %) Al produced by cryogenic mechanical alloying [J]. Nanostruct Mater 7 (1996) 565-572
25. 2(3Y) by spark plasma sintering [J]. J Eur Ceram Soc 20 (2000) 2441-2445
26. PARIS S., GAFFET E., BERNARD F., and MUNIR Z.A. Spark plasma synthesis from mechanically activated powders: A versatile route for producing dense nanostructured iron aluminides [J]. Scripta Mater 50 (2004) 691-696