Advanced bainitic and martensitic steels with carbide-free microstructures containing retained austenite

Materials Science Forum

Volumn 638-642, Issue , 2010, Pages 110-117

  Edmonds, D V ^a  

^a UNIVERSITY OF LEEDS   (United Kingdom)

Author keywords

Acicular steels; Austempered ductile iron; Bainite; Dual phase steels; Martensite; Quenched and partitioned (Q P) steels; Retained austenite; TRIP steels

Indexed keywords

ALLOYING; AUSTENITE; BAINITE; BAINITIC TRANSFORMATIONS; CARBIDES; CARBON; DUAL PHASE STEEL; DUCTILITY; ENHANCED RECOVERY; FERRITE; FUEL ECONOMY; GRAIN REFINEMENT; GRAIN SIZE AND SHAPE; HIGH STRENGTH STEEL; MARTENSITE; MARTENSITIC STAINLESS STEEL; MARTENSITIC TRANSFORMATIONS; MICROSTRUCTURE; TRANSFORMATION INDUCED PLASTICITY STEEL; VEHICLE TRANSMISSIONS;

AUSTEMPERED DUCTILE IRONS; BAINITIC MICROSTRUCTURES; DEVELOPMENT AND APPLICATIONS; FERRITE GRAIN REFINEMENT; QUENCHING AND PARTITIONING; RETAINED AUSTENITE; THERMO-MECHANICAL PROCESSING; TRANSFORMATION INDUCED PLASTICITY;

PLASTICITY;

EID: 75849130398     PISSN: 02555476     EISSN: 16629752     Source Type: Book Series    
DOI: 10.4028/www.scientific.net/MSF.638-642.110     Document Type: Conference Paper

References (69)

1. J.H. Woodhead and S.R. Keown, in: HSLA Steels-Metallurgy and Applications edited by J.M. Gray, T. Ko, Z. Shouhua, W. Baorong and X. Xishan, American Society for Metals, OH, USA (1986), p.15
2. T. Gladman: The Physical Metallurgy of Microalloyed Steels (Institute of Materials, London 1997)
3. D.V. Edmonds, in: Handbook of Mechanical Alloy Design edited by G.E. Totten, L. Xie and K. Funatani, Marcel Dekker, New York (2004), p. 321
4. Y.E. Smith, A.P. Coldren and R.L. Cryderman, in: Toward Improved Ductility and Toughness, Climax Molydenum (Japan) Ltd. (1972), p.119
5. T. Araki, M. Enomoto and K. Shibata, in: HSLA Steels '90, ASM Int., OH, USA (1991)
6. A. Rehman and D.V. Edmonds, in: HSLA Steels 2000, edited by L. Guoquan, W. Fuming, W. Zubin and Z. Hongtao, The Metallurgical Industry Press, Beijing (2000), p. 241
7. G.S. Barritte and D.V. Edmonds, in: Advances in the Physical Metallurgy and Applications of Steels, The Metals Society, London (1982), p. 126
8. K. Yamamoto et al., in: Residual and Unspecified Elements in Steel edited by A.S. Melilli and E.G. Nisbett, ASTM, Philadelphia, PA (1989), p. 266
9. K. Nishioka et al., US patent 4,851,052. (1989)
10. I. Madariaga and I. Gutierrez: Mater. Sci. Forum Vol. 284 (1995), p. 419
11. K. He and D.V. Edmonds: Mater. Sci. Technol. Vol. 18 (2002), p. 289
12. C. Garcia-Mateo et al.: ISIJ International Vol. 48 (2008), p. 1270; p. 1276
13. J.R. Fekete et al., in New Developments in Advanced High-Strength Sheet Steels, edited by J.G. Speer et al., AIST, PA, USA (2008), p. 1
14. S. Hayami and T. Furukawa, in: Microalloying '75, Union Carbide, New York (1977), p.311
15. H. Cochrane: Formable Dual Phase Steels (D Phil Dissertation, University of Oxford 1989)
16. G. Thomas, in: Fundamentals of Microalloying Forging Steels, edited by G. Krauss and S.K. Banerji, TMS, Pa, USA (1987), p. 505
17. Kobelco Technology Review, No. 8, Kobe Steel Limited, Japan, 1990
18. G. Thomas: Iron and Steel Vol. 46 (1973), p. 451
19. G. Thomas: Metall. Trans. Vol. 9A (1978), p. 439
20. N.C. Law, P.R. Howell and D.V. Edmonds: Metal Sci. Vol. 6, (1979), p. 507
21. A.H. Nakagawa and G. Thomas: Metall. Trans. Vol. 16A (1985), p. 831
22. B.V.N. Rao and G. Thomas: Metall. Trans. Vol. 11A (1980), p. 441
23. K.J. Irving et al.: J Iron Steel Inst. Vol. 186 (1957), p. 54
24. D.V. Edmonds: World Steel Review Vol. 1 (1991), p. 76
25. J.W. Christian and D.V. Edmonds: in Phase Transformations in Ferrous Alloys, edited by A.R. Marder and J. I. Goldstein, AIME (1984), p. 293
26. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall.Trans. Vol. 10A (1979), p. 895
27. S. Matas and R.F. Hehemann: Trans. AIME. Vol. 221 (1961), p. 176
28. J.P. Oblak and R.F. Hehemann, in: Transformations and Hardenability in Steels, Climax Molybdenum Co. (1967), p. 15
29. R.F. Hehemann, in: Phase Transformations, ASM, OH, USA (1970), p. 397
30. R.F. Hehemann, K.R. Kinsman and H.I. Aaronson: Metall. Trans. Vol. 3 (1972), p. 1077
31. H.K.D.H.Bhadeshia and D.V. Edmonds: Acta Metall. Vol. 28 (1980), p. 1265
32. J.G. Speer, D.V. Edmonds, F.C. Rizzo and D.K. Matlock: Current Opinion in Solid-State and Materials Science Vol. 8 (2004), p. 219
33. H.K.D.H. Bhadeshia and D.V. Edmonds: Metal Science J. Vol. 17 (1983), p. 411
34. H.K.D.H. Bhadeshia and D.V. Edmonds: Metal Science J. Vol. 17 (1983), p. 420
35. V.T.T. Miihkinen and D.V. Edmonds: Mater. Sci. Technol. Vol. 3 (1987), p. 441
36. H.K.D.H. Bhadeshia, in: Future Developments of Metals and Ceramics, edited by J.A. Charles, G.W. Greenwood and G.C. Smith, Inst. Mater., London (1992), p. 25
37. J.K. Yates: Sci. Parliam. Vol. 53 (1996), p. 2
38. J. Dodd: Modern Casting Vol. 68 (1978), p. 60
39. J.F. Janowak and R.B. Gundlach: Trans. AFS Vol. 91 (1983), p. 377
40. W.J. Dubensky and K.B. Rundman: Trans. AFS Vol. 93 (1985), p. 389
41. V. Franetovic, M. Shea and E. Ryntz: Mater. Sci. Eng. Vol. 96 (1987), p. 231
42. N. Darwish and R. Elliot: Mater. Sci. Technol. Vol. 9 (1993), p. 572
43. A. Honarbakhsh-Raouf, Phase Transformation in Austempered Ductile Iron (ADI) (PhD Dissertation, University of Leeds 1997)
44. A. Honarbakhsh-Raouf and D.V. Edmonds, in: Electron Microscopy 1998, edited by H.A.C. Benavides and M.J. Yacaman, Inst. Physics Publishing (1998), p. 173
45. F.G. Caballero, H.K.D.H. Bhadeshia, J.A. Mawella, D.G. Jones and P. Brown: Mater. Sci. Technol. Vol. 18 (2002), p. 279
46. C. Garcia-Mateo, F.G. Caballero and H.K.D.H. Bhadeshia: J. de Phys. Colloque Vol. 112 (2003), p. 285
47. C. Garcia-Mateo, F.G. Caballero and H.K.D.H. Bhadeshia: ISIJ Int. Vol. 43 (2003), p. 1238
48. F.G. Caballero, H.K.D.H. Bhadeshia, J.A. Mawella, D.G. Jones and P. Brown: Mater. Sci. Technol. Vol. 17 (2001) p. 512; p. 517
49. H.K.D.H. Bhadeshia, in: New Developments on Metallurgy and Applications of High Strength Steels, Proceedings of International Conference, Buenos Aires, Argentina (2008), edited by T. Perez, TMS, Warrendale, PA, USA (2009), p. 3
50. V.F. Zackay and E.R. Parker: Steel Vol. 161 (1967), p. 73
51. V.F. Zackay, E.R. Parker, D. Fahr and B. Bush: ASM Transactions Quarterly Vol. 60 (1967), p. 252
52. I. Tamura: Metal Sci. Vol. 16 (1982), p. 245
53. O. Matsumura, Y. Sakuma and H. Takechi: Scripta Metall. Vol. 21 (1987), p. 1301
54. O. Matsumara, Y. Sakuma and H. Takeshi: Trans. ISIJ Vol. 27 (1987), p. 570
55. P. Jacques, Y. Carnot, P. Harlet, J. Ladriere and F. Delannay: Metall. Trans. Vol. 29A (1998), p. 2383
56. E. Girault, P. Jacques, P. Ratchev, J. Van Humbeeck, B. Verlinden and E. Aernoudt: Mater. Sci. Eng. Vol. A273 (1999), p. 471
57. B.C. De Cooman: Current Opinion in Solid State and Materials Science Vol. 8 (2004), p. 285
58. J.G. Speer, D.K. Matlock, B.C. De Cooman and J.G. Schroth: Acta Mater. Vol. 51 (2003), p. 2611
59. J.G. Speer, A.M. Streicher, D.K. Matlock, F.C. Rizzo and G. Krauss, in: Austenite Formation and Decomposition, edited by E.B. Damm and M. Merwin, TMS/ISS, PA, USA (2003), p. 505
60. D.K. Matlock, V.E. Brautigam and J.G. Speer, in: THERMEC 2003, Trans Tech Publications, Uetikon-Zurich, Switzerland (2003), p. 1089
61. D.V. Edmonds, K. He, F. C. Rizzo, B. C. De Cooman, D. K. Matlock and J. G. Speer: Mater. Sci. Eng. Vol. A438-440 (2006), p. 25
62. D.V. Edmonds, K. He, F.C. Rizzo, J.G. Speer and D.K. Matlock, in: New Developments on Metallurgy and Applications of High Strength Steels, Proceedings of International Conference, Buenos Aires, Argentina (2008), edited by T. Perez, TMS, Warrendale, PA, USA (2009), p. 829
63. th European Microscopy Congress (EMC 2008), Vol. 2: Materials Science, edited by S. Richter and A. Schwedt, Springer (2008), p. 429
64. F.L.H. Gerdemann: Microstructure and Hardness of 9260 Steel Heat-Treated by the Quenching and Partitioning Process (Diploma Thesis, Aachen University of Technology 2004)
65. J.G. Speer, A.J. Shutts, D.K. Matlock, D.V. Edmonds, F. Rizzo, E.B. Damm, in: New Developments in Long and Forged Products: Metallurgy and Applications, Association for Iron & Steel Technology (2006), p. 191
66. D.K. Matlock and J.G. Speer, in: Structural Steels, edited by H.C. Lee, The Korean Institute of Metals and Materials, Seoul (2006), p. 774
67. A.J. Clarke: Carbon Partitioning into Austenite from Martensite in a Silicon Containing High Strength Sheet Steel (PhD Thesis, Colorado School of Mines 2006)
68. E. De Moor: Assessment of Quenching and Partitioning as a Fundamentally New Way of Producing Advanced High Strength Martensitic Steel Grades with Improved Ductility (PhD Thesis, Universiteit Gent 2009)
69. S. Unger, J. Grahmann, A. Shutts, C. Wolf and J. Gibbs: Quenching and Partitioning of Ductile Cast Iron (Colorado School of Mines Internal Report 2004)