Determination of the selectivity coefficient of a chloride ion selective electrode in alkaline media simulating the cement paste pore solution

Journal of Electroanalytical Chemistry

Volumn 639, Issue 1-2, 2010, Pages 43-49

  de Vera, G ^a   Climent, M A ^a   Anton C ^b   Hidalgo, A ^b   Andrade, C ^b  

^a UNIVERSITY OF ALICANTE   (Spain)

^b INSTITUTO DE CIENCIAS DE LA CONSTRUCCIÓN EDUARDO TORROJA   (Spain)

Author keywords

Cement paste pore solution; Chloride; Ionic selective electrode; Potentiometry; Selectivity coefficient; Sensor

Indexed keywords

ALKALINITY; CHLORINE COMPOUNDS; CONCENTRATION (PROCESS); CURVE FITTING; ION SELECTIVE ELECTRODES; LEACHING; MARTENSITIC STAINLESS STEEL; OIL WELL CEMENTING; PORTLAND CEMENT; POTENTIOMETERS (ELECTRIC MEASURING INSTRUMENTS); POTENTIOMETRIC SENSORS;

CEMENT PASTE; PORE SOLUTION; POTENTIOMETRY; SELECTIVE ELECTRODES; SELECTIVITY COEFFICIENT;

SOLUTION MINING;

EID: 75249092974     PISSN: 15726657     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jelechem.2009.11.010     Document Type: Article

References (36)

1. Neville A. Chloride attack of reinforced concrete: an overview. Mater. Struct. 28 (1995) 63-70
2. Alonso C., Andrade C., Castellote M., and Castro P. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar. Cem. Concr. Res. 30 (2000) 1047-1055
3. Chaussadent T., and Arliguie G. AFREM test procedures concerning chlorides in concrete: extraction and titration methods. Mater. Struct. 32 217 (1999) 230-234
4. Castellote M., Alonso C., Andrade C., Castro P., and Echeverría M. Alkaline leaching method for the determination of the chloride content in the aqueous phase of hardened cementitious materials. Cem. Concr. Res. 31 (2001) 233-238
5. Longuet P., Burglen L., and Zelwer A. La phase liquide du ciment hydraté. Rev. Mater. Constr. Trav. Publics 676 (1973) 35-41
6. Barneyback R.S., and Diamond S. Expression and analysis of pore fluids from hardened cement pastes and mortars. Cem. Concr. Res. 11 (1981) 279-285
7. Page C.L., and Vennesland O. Pore solution composition and chloride binding capacity of silica-fume cement pastes. Mater. Construct. (RILEM) 16 91 (1983) 19-25
8. Diamond S. Chloride concentrations in concrete pore solutions resulting from calcium and sodium chloride admixtures. Cem. Concr. Aggr. (ASTM) 8 (1986) 97-102
9. Anstice D.J., Page C.L., and Page M.M. The pore solution phase of carbonated cement pastes. Cem. Concr. Res. 35 (2005) 377-383
10. B. Elsener, L. Zimmermann, D. Flückige, D. Bürchler, H. Böhni, Chloride penetration-non destructive determination of the free chloride content in mortar and concrete, in: L.O. Nilsson, J.P. Ollivier (Eds.), Proceedings of RILEM International Workshop on Chloride Penetration into Concrete (St. Rémy-lès-Chevreuse, France 1995), RILEM Publications, Bagneux, France, 1997, pp. 17-26.
11. Atkins C.P., Scantlebury J.D., Nedwell P.J., and Blatch S.P. Monitoring chloride concentrations in hardened cement pastes using ion selective electrodes. Cem. Concr. Res. 26 (1996) 319-324
12. Climent-Llorca M.A., Viqueira-Pérez E., and López-Atalaya M.M. Embeddable Ag/AgCl sensors for in-situ monitoring chloride contents in concrete. Cem. Concr. Res. 26 8 (1996) 1157-1161
13. O. Klinghoffer, P. Goltermann, R. Bassler, Smart structures: embeddable sensors for use in the integrated monitoring systems of concrete structures, in: J.R. Casas, D.M. Frangopol, A.S. Nowak (Eds.), Proceedings of First International Conference on Bridge Maintenance, Safety and Management (IABMAS 2002 Barcelona), International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, 2002.
14. Elsener B., Zimmermann L., and Böhni H. Non destructive determination of the free chloride content in cement based materials. Mater. Corros. 54 (2003) 440-446
15. McCarter W.J., and Vennesland O. Sensor systems for use in reinforced concrete structures. Construct. Build. Mater. 18 (2004) 351-358
16. G.S. Duffó, S.B. Farina, E.A. Arva, C.M. Giordano, C.J. Lafont, Development of an integrated sensor to monitor the corrosion process of reinforced concrete structures, in: R.M. Ferreira, J. Gulikers, C. Andrade (Eds.), Proceedings of International RILEM Workshop on Integral Service Life Modelling of Concrete Structures (Guimarães, Portugal 2007), RILEM Publications, Bagneux, France, 2007, pp. 166-173.
17. Climent M.A., de Vera G., Hidalgo A., Andrade C., and Alonso C. Chloride ion activities in synthetic concrete pore solutions: theoretical models and potentiometric measurements. In: Cohen M., Mindess S., and Skalny J. (Eds). Materials Science of Concrete: The Sidney Diamond Symposium (1998), American Ceramic Society, Westerville, OH, USA 285-294
18. de Vera G., Hidalgo A., Climent M.A., Andrade C., and Alonso C. Chloride ion activities in synthetic concrete pore solutions: effect of the accompanying ions. J. Am. Ceram. Soc. 83 (2000) 640-644
19. Hidalgo A., de Vera G., Climent M.A., Andrade C., and Alonso C. Measurements of chloride activity coefficients in real portland cement paste pore solutions. J. Am. Ceram. Soc. 84 (2001) 3008-3012
20. Morf W.E. The Principles of Ion-Selective Electrodes and Membrane Transport (1981), Elsevier
21. Cammann K. Working with Ion-Selective Electrodes (1979), Springer Verlag, New York
22. pot values, technical report of the commission on electroanalytical chemistry, analytical chemistry division of the IUPAC. Pure Appl. Chem. 67 3 (1995) 507-518
23. Maccà C. Determination of potentiometric selectivity. Anal. Chim. Acta 321 (1996) 1-10
24. Zhang W., Fakler A., Demuth C., and Spichiger U.E. Comparison of different methods for determining the selectivity coefficient using a magnesium-selective electrode. Anal. Chim. Acta 375 (1998) 211-222
25. Lindner E., and Umezawa Y. Performance evaluation criteria for preparation and measurement of macro and microfabricated ion-selective electrodes, technical report of the analytical chemistry division of the IUPAC. Pure Appl. Chem. 80 1 (2008) 85-104
26. Deyhimi F. A method for the determination of potentiometric selectivity coefficients of ion selective electrodes in the presence of several interfering ions. Talanta 50 (1999) 1129-1134
27. Radu A., Peper S., Bakker E., and Diamond D. Guidelines for improving the lower detection limit of ion-selective electrodes: a systematic approach. Electroanalysis 19 2-3 (2007) 144-154
28. Kane P., and Diamond D. Determination of ion-selective electrode characteristics by non-linear curve fitting. Talanta 44 (1997) 1847-1858
29. Page C.L., Lambert P., and Vassie P.R.W. Investigations of reinforcement corrosion. I. The pore electrolyte phase in chloride contaminated concrete. Mater. Struct. 24 (1991) 243-252
30. Haque M.N., and Kayyali O.A. Free and water soluble chloride in concrete. Cem. Concr. Res. 25 (1995) 531-542
31. Maslehuddin M., Page C.L., Rasheeduzzafar S., and Al-Mana A.I. Effect of temperature on pore solution chemistry and reinforcement corrosion in contaminated concrete. In: Page C.L., Bamforth P.B., and Figg J.W. (Eds). Corrosion of Reinforcement in Concrete Construction (1996), The Royal Society of Chemistry, Cambridge, UK 67-75
32. Bates R.G., and Bower V.E. Alkaline solutions for pH control. Anal. Chem. 28 (1956) 1322-1324
33. L.N. Plummer, D.L. Parkhurst, G.W. Fleming, S.A. Dunkle, A computer program incorporating Pitzer's equations for calculation of geochemical reactions in brines, US Geological Survey, Water resources investigations report 88-4153, Reston, 1988.
34. In: Weast R.C. (Ed). Handbook of Chemistry and Physics. 66th ed. (1985-1986), CRC Press, Boca Raton, FL, USA
35. Bard A.J., and Faulkner L.R. Electrochemical Methods (1980), Wiley, New York
36. Pedeferri P., and Bertolini L. La Durabilità del Calcestruzzo Armato (2000), McGraw-Hill, Milano, Italy (p. 81, only available in Italian)