Composite resin reinforced with pre-tensioned glass fibers. Influence of prestressing on flexural properties

Dental Materials

Volumn 26, Issue 2, 2010, Pages 118-125

  Schlichting, Luís Henrique ^a,b   de Andrada, Mauro Amaral Caldeira ^a   Vieira, Luiz Clóvis Cardoso ^a   de Oliveira Barra, Guilherme Mariz ^a   Magne, Pascal ^b  

^a FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

^b UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

Author keywords

Composite resin; Fiber reinforced composite; Flexural properties; Flexural strength; Glass fibers; Initial failure; Prestressed; Prestressing; Pull out

Indexed keywords

COMPOSITE RESINS; FIBER-REINFORCED COMPOSITE; FLEXURAL PROPERTIES; FLEXURAL STRENGTH; INITIAL FAILURE; PRE-STRESSED; PULL-OUT;

ACTIVE FILTERS; BENDING STRENGTH; FIBER REINFORCED PLASTICS; GLASS FIBERS; PRESTRESSING; REGRESSION ANALYSIS; REINFORCED PLASTICS; REINFORCEMENT; RESINS; TENSILE STRENGTH;

FIBERS;

GLASS; GLASS FIBER; RESIN;

ARTICLE; CHEMISTRY; COMPRESSIVE STRENGTH; DENTAL CARE; DENTAL SURGERY; MATERIALS TESTING; MECHANICAL STRESS; PLIABILITY; TENSILE STRENGTH; YOUNG MODULUS;

COMPOSITE RESINS; COMPRESSIVE STRENGTH; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; ELASTIC MODULUS; GLASS; MATERIALS TESTING; PLIABILITY; STRESS, MECHANICAL; TENSILE STRENGTH;

EID: 75049083551     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.09.004     Document Type: Article

References (31)

1. Callister Jr. W.D. Composites. In: Callister Jr. W.D. (Ed). Materials science and engineering: an introduction. 4th ed. (1997), John Wiley & Sons, New York 510-548
2. Reinhart T.J. Overview of composite materials. In: Peters S.T. (Ed). Handbook of composites. 2nd ed. (1998), Chapman & Hall, London cap. 1, p. 21-33
3. Freilich M.A., Meiers J.C., and Duncan J.P. Fiber-reinforced composites in clinical dentistry (2000), Quintessence, Carol Stream p. 4-14
4. Fredriksson M., Astbäck J., Pamenius M., and Arvidson K. A retrospective study of 236 patients with teeth restored by carbon fiber-reinforced epoxy resin posts. J Prosthet Dent 80 (1998) 151-157
5. Ferrari M., Vichi A., Mannocci F., and Mason P.N. Retrospective study of the clinical performance of fiber posts. Am J Dent 13 (2000) 9B-13B
6. Magne P., Perakis N., Belser U., and Krejci I. Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design. J Prosthet Dent 87 (2002) 516-527
7. Rüsch H. Concreto armado e protendido: propriedades dos materiais e dimensionamento (1980), Campus, Rio de Janeiro p. 45-6
8. Ruschel R. Curso básico de concreto armado (1974), Globo, Porto Alegre
9. O'Brien W.J. Dental materials and their selection. 2nd ed. (1997), Quintessence Publishing
10. Baud G. Hormigón armado. In: Baud G. (Ed). Tecnología de la Construcción. 3rd ed. (1970), Editorial Blume, Barcelona 298-407
11. Pfeil W. Concreto Protendido. 3rd ed. (1991), Livros Técnicos e Científicos, Rio de Janeiro
12. Garden H.N., and Hollaway L.C. An experimental study of the failure modes of reinforced concrete beams strengthened with prestressed carbon composite plates. Composites Part B 29 (1998) 411-424
13. Quantrill R.J., and Hollaway L.C. The flexural rehabilitation of reinforced concrete beams by the use of prestressed advanced composite plates. Compos Sci Technol 58 (1998) 1259-1275
14. Toutanji H., and Saafi M. Performance of concrete beams prestressed with aramid fiber-reinforced polymer tendons. Compos Struct 44 (1999) 63-70
15. Czaderski C., and Motavalli M. 40-Year-old full-scale concrete bridge girder strengthened with prestressed CFRP plates anchored using gradient method. Composites Part B 38 (2007) 878-886
16. Stoll F., Saliba J.E., and Casper L.E. Experimental study of CFRP-prestressed high-strength concrete bridge beams. Compos Struct 49 (2000) 191-200
17. Lastumäki T.M., Lassila L.V.J., and Vallittu P.K. The semi-interpenetrating polymer network matrix of fiber-reinforced composite and its effect on the surface adhesive properties. J Mater Sci Mater Med 9 (2003) 803-809
18. Leung R.L., Fan P.L., and Johnston W.M. Post-irradiation polymerization of visible light-activated composite resin. J Dent Res 62 (1983) 363-365
19. Stansbury J.W. Curing dental resins and composites by photopolymerization. J Esthet Dent 12 (2000) 300-308
20. Uctasli S., Tezvergil A., Lassila L.V., and Vallittu P.K. The degree of conversion of fiber-reinforced composites polymerized using different light-curing sources. Dent Mater 21 (2005) 469-475
21. Dyer S.R., Lassila L.V.J., Jokinen M., and Vallittu P.K. Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dent Mater 20 (2004) 947-955
22. Altieri J.V., Burstone C.J., Goldberg A.J., and Patel A.P. Longitudinal clinical evaluation of fiber-reinforced composite fixed partial dentures: a pilot study. J Prosthet Dent 71 (1994) 16-22
23. Shahawy M.A., and Beitelman T. Experimental investigation on structural repair and strengthening of damaged prestressed concrete slabs utilizing externally bonded carbon laminates. Composites Part B 27 (1996) 217-224
24. Giordano R. Fiber reinforced composite resin systems. Gen Dent 48 (2000) 244-249
25. Vallittu P.K. The effect of glass fiber reinforcement on the fracture resistance of a provisional fixed partial denture. J Prosthet Dent 79 (1998) 125-129
26. Ellakwa A.E., Shortall A.C., and Marquis P.M. Influence of fiber type and wetting on the flexural properties of an indirect fiber reinforced composite. J Prosthet Dent 88 (2002) 485-490
27. Karacaer O., Polat T.N., Tezvergil A., Lassila L.V., and Vallittu P.K. The effect of length and concentration of glass fibers on the mechanical properties of an injection- and a compression-molded denture base polymer. J Prosthet Dent 90 (2003) 385-393
28. Grandini S., Goracci C., Monticelli F., Tay F.R., and Ferrari M. Fatigue resistance and structural characteristics of fiber posts: three-point bending test and SEM evaluation. Dent Mater 21 (2005) 75-82
29. Belli S., Dönmez N., and Eskitaşcioǧlu G. The effect of c-factor and flowable resin or fiber use at the interface on microtensile bond strength to dentin. J Adhes Dent 8 (2006) 247-253
30. Dyer S.R., Lassila L.V.J., Jokinen M., and Vallittu P.K. Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials. J Prosthet Dent 94 (2005) 219-226
31. Goldberg A.J., and Burstone C.J. The use of continuous fiber reinforcement in dentistry. Dent Mater 8 (1992) 197-202