In-situ study of the formation process of stannate conversion coatings on AZ91D magnesium alloy using electrochemical noise

Corrosion Science

Volumn 52, Issue 3, 2010, Pages 892-900

  Liu, Xiaolan ^a   Zhang, Tao ^a,b   Shao, Yawei ^a,b   Meng, Guozhe ^a,b   Wang, Fuhui ^a,b  

^a HARBIN ENGINEERING UNIVERSITY   (China)

^b INSTITUTE OF METAL RESEARCH   (China)

Author keywords

A. Magnesium; B. Electrochemical calculation; B. SEM; C. Oxide coatings

Indexed keywords

AZ91D ALLOY; AZ91D MAGNESIUM ALLOYS; C. OXIDE COATINGS; COATING DISSOLUTION; DISSOLUTION PROCESS; ELECTROCHEMICAL CALCULATION; ELECTROCHEMICAL NOISE; ELECTROCHEMICAL PROCESS; FORMATION PROCESS; GROWTH STAGES; IN-SITU; IN-SITU STUDY; NOISE RESISTANCE; OXIDE COATING; SEM; SPECTRAL NOISE; STANNATE CONVERSION COATING; STANNATES;

ALLOYS; CORROSION; CORROSION PROTECTION; MAGNESIUM; MAGNESIUM ALLOYS; PROTECTIVE COATINGS; WAVELET TRANSFORMS;

DISSOLUTION;

EID: 74849124270     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2009.11.009     Document Type: Article

References (56)

1. Zucchi F., Frignani A., Grassi V., Trabanelli G., and Monticelli C. Stannate and permanganate conversion coatings on AZ31 magnesium alloy. Corros. Sci. 49 (2007) 4542-4552
2. Zhao M., Wu S., Luo J., Fukuda Y., and Nakae H. A chromium-free conversion coating of magnesium alloy by a phosphate-permanganate solution. Surf. Coat. Technol. 200 (2006) 5407-5412
3. Zhao M., Wu S., An P., Fukuda Y., and Nakae H. Growth of multi-elements complex coating on AZ91D magnesium alloy through conversion treatment. J. Alloy Compd. 427 (2007) 310-315
4. Zhao M., Wu S., An P., and Luo J. Influence of surface pretreatment on the chromium-free conversion coating of magnesium alloy. Mater. Chem. Phys. 103 (2007) 475-483
5. Zhao M., Wu S., An P., Luo J., Fukuda Y., and Nakae H. Microstructure and corrosion resistance of a chromium-free multi-elements complex coating on AZ91D magnesium alloy. Mater. Chem. Phys. 99 (2006) 54-60
6. Zhao M., Wu S., An P., and Luo J. Study on the deterioration process of a chromium-free conversion coating on AZ91D magnesium alloy in NaCl solution. Appl. Surf. Sci. 253 (2006) 468-475
7. Brunelli K., Dabalà M., Calliari I., and Magrini M. Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys. Corros. Sci. 47 (2005) 989-1000
8. Dabalà M., Brunelli K., Napolitani E., and Magrini M. Cerium-based chemical conversion coating on AZ63 magnesium alloy. Surf. Coat. Technol. 172 (2003) 227-232
9. Umehara H., Takaya M., and Terauchi S. Chrome-free surface treatments for magnesium alloy. Surf. Coat. Technol. 169-170 (2003) 666-669
10. Niu L., Jiang Z., Li G., Gu C., and Lian J. A study and application of zinc phosphate coating on AZ91D magnesium alloy. Surf. Coat. Technol. 200 (2006) 3021-3026
11. Chong K., and Shih T. Conversion-coating treatment for magnesium alloys by a permanganate-phosphate solution. Mater. Chem. Phys. 80 (2003) 191-200
12. Ardelean H., Frateur I., and Marcus P. Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings. Corros. Sci. 50 (2008) 1907-1918
13. 3 on corrosion resistance of cerium conversion film on Mg-Gd-Y-Zr magnesium alloy surface. Scr. Mater. 59 (2008) 955-958
14. Yang K., Ger M., Hwu W., Sung Y., and Liu Y. Study of vanadium-based chemical conversion coating on the corrosion resistance of magnesium alloy. Mater. Chem. Phys. 101 (2007) 480-485
15. Liu J., Guo Y., and Huang W. Study on the corrosion resistance of phytic acid conversion coating for magnesium alloys. Surf. Coat. Technol. 201 (2006) 1536-1541
16. Rudd A., Breslin C., and Mansfeld F. The corrosion protection afforded by rare earth conversion coatings applied to magnesium. Corros. Sci. 42 (2000) 275-288
17. Zhou W., Shan D., Han E., and Ke W. Structure and formation mechanism of phosphate conversion coating on die-cast AZ91D magnesium alloy. Corros. Sci. 50 (2008) 329-337
18. Lin C., Lin H., Lin K., and Lai W. Formation and properties of stannate conversion coatings on AZ61 magnesium alloys. Corros. Sci. 48 (2006) 93-109
19. Lin C., Lee C., Li W., Chen Y., and Fang G. Formation of phosphate-permanganate conversion coating on AZ31 magnesium alloy. J. Electrochem. Soc. 153 (2006) B90-B96
20. Tan Y., Bailey S., and Kinsella B. Studying the formation process of chromate conversion coatings on aluminum using continuous electrochemical noise resistance measurements. Corros. Sci. 44 (2002) 1277-1286
21. Cheng Y., Luo J., and Wilmott M. Spectral analysis of electrochemical noise with different transient shapes. Electrochim. Acta 45 (2000) 1763-1771
22. Chen J., and Bogaerts W. The physical meaning of noise resistance. Corros. Sci. 37 (1995) 1839-1842
23. Lafront A., Zhang W., Jin S., Tremblay R., Dubé D., and Ghali E. Pitting corrosion of AZ91D and AJ62x magnesium alloys in alkaline chloride medium using electrochemical techniques. Electrochim. Acta 51 (2005) 489-501
24. Mansfeld F., Sun Z., and Hsu C. Electrochemical noise analysis (ENA) for active and passive systems in chloride media. Electrochim. Acta 46 (2001) 3651-3664
25. Nagiub A., and Mansfeld F. Evaluation of corrosion inhibition of brass in chloride media using EIS and ENA. Corros. Sci. 43 (2001) 2147-2171
26. Haruna T., Morikawa Y., Fujimoto S., and Shibata T. Electrochemical noise analysis for estimation of corrosion rate of carbon steel in bicarbonate solution. Corros. Sci. 45 (2003) 2093-2104
27. Gouveia-Caridade C., Pereira M.I.S., and Brett C.M.A. Electrochemical noise and impedance study of aluminium in weakly acid chloride solution. Electrochim. Acta 49 (2004) 785-793
28. Aballe A., Bethencourt M., Botana F., and Marcos M. Wavelet transform-based analysis for electrochemical noise. Electrochem. Commun. 1 (1999) 266-270
29. Aballe A., Bethencourt M., Botana F., and Marcos M. Using wavelets transform in the analysis of electrochemical noise data. Electrochim. Acta 44 (1999) 4805-4816
30. Aballe A., Bethencourt M., Botana F., Marcos M., and Sánchez-Amaya J. Use of wavelets to study electrochemical noise transients. Electrochim. Acta 46 (2001) 2353-2361
31. Cao F., Zhang Z., Su J., Shi Y., and Zhang J. Electrochemical noise analysis of LY12-T3 in EXCO solution by discrete wavelet transforms technique. Electrochim. Acta 51 (2006) 1359-1364
32. Zhao B., Li J., Hu R., Du R., and Lin C. Study on the corrosion behavior of reinforcing steel in cement mortar by electrochemical noise measurements. Electrochim. Acta 52 (2007) 3976-3985
33. Zhang T., Shao Y., Meng G., and Wang F. Electrochemical noise analysis of the corrosion of AZ91D magnesium alloy in alkaline chloride solution. Electrochim. Acta 53 (2007) 561-568
34. Zhang T., Liu X., Shao Y., Meng G., and Wang F. Electrochemical noise analysis on the pit corrosion susceptibility of Mg-10Gd-2Y-0.5Zr, AZ91D alloy and pure magnesium using stochastic model. Corros. Sci. 50 (2008) 3500-3507
35. Shao Y., Cao J., Meng G., Zhang T., and Wang F. The role of a zinc phosphate pigment in the corrosion of scratched epoxy-coated steel. Corros. Sci. 51 (2009) 371-379
36. Pujar M., Parvathavarthini N., Dayal R., and Thirunavukkarasu S. Assessment of intergranular corrosion (IGC) in 316(N) stainless steel using electrochemical noise (EN) technique. Corros. Sci. 51 (2009) 1707-1713
37. Na K., and Pyun S. Comparison of susceptibility to pitting corrosion of AA2024-T4, AA7075-T651 and AA7475-T761 aluminium alloys in neutral chloride solutions using electrochemical noise analysis. Corros. Sci. 50 (2008) 248-258
38. Liu X., Zhan J., and Liu Q. The influence of tensile stress on electrochemical noise from aluminum alloy in chloride media. Corros. Sci. 51 (2009) 1460-1466
39. Kim S., and Kim H. Electrochemical noise analysis of PbSCC of Alloy 600 SG tube in caustic environments at high temperature. Corros. Sci. 51 (2009) 191-196
40. Meng G., Wei L., Zhang T., Shao Y., Wang F., Dong C., and Li X. Effect of microcrystallization on pitting corrosion of pure aluminium. Corros. Sci. 51 (2009) 2151-2157
41. Klapper H.S., and Goellner J. Electrochemical noise from oxygen reduction on stainless steel surfaces. Corros. Sci. 51 (2009) 144-150
42. Naderi R., and Attar M.M. Application of the electrochemical noise method to evaluate the effectiveness of modification of zinc phosphate anticorrosion pigment. Corros. Sci. 51 (2009) 1671-1674
43. Hernández M., Genescá J., Uruchurtu J., and Barba A. Correlation between electrochemical impedance and noise measurements of waterborne coatings. Corros. Sci. 51 (2009) 499-510
44. Mansfeld F., Lee C., and Zhang G. Comparison of electrochemical impedance and noise data in the frequency domain. Electrochim. Acta 43 (1998) 435-438
45. Zhang Z., Leng W., Cai Q., Cao F., and Zhang J. Study of the zinc electroplating process using electrochemical noise technique. J. Electroanal. Chem. 578 (2005) 357-367
46. Bertocci U., Frydman J., Gabrielli C., Huet F., and Keddam M. Analysis of electrochemical noise by power spectral density applied to corrosion studies. J. Electrochem. Soc. 145 (1998) 2780-2786
47. Tan Y., Bailey S., and Kinsella B. The monitoring of the formation and destruction of corrosion inhibitor films using electrochemical noise analysis (ENA). Corros. Sci. 38 (1996) 1681-1695
48. Ashassi-Sorkhabi H., and Seifzadeh D. Analysis of raw and trend removed EN data in time domain to evaluate corrosion inhibition effects of New Fuchsin dye on steel corrosion and comparison of results with EIS. J. Appl. Electrochem. 38 (2008) 1545-1552
49. Ilevbare G., and Burstein G. The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels. Corros. Sci. 43 (2001) 485-513
50. Burstein G., and Vines S. Repetitive nucleation of corrosion pits on stainless steel and the effects of surface roughness. J. Electrochem. Soc. 148 (2001) B504-B516
51. Burstein G., and Soutob R. Improvement in pitting resistance of stainless steel surfaces by prior anodic treatment in metasilicate solution. J. Electrochem. Soc. 151 (2004) B537-B542
52. Qafsaoui W., Huet F., and Takenouti H. Analysis of the inhibitive effect of BTAH on localized corrosion of Al 2024 from electrochemical noise measurements. J. Electrochem. Soc. 156 (2009) C67-C74
53. 4 system. J. Electrochem. Soc. 152 (2005) B228-B235
54. Bertocci U., Huet F., Nogueira R., and Rousseau P. Drift removal procedures in the analysis of electrochemical noise. Corrosion 58 (2002) 337-347
55. Mansfeld F., Sun Z., Hsu C., and Nagiub A. Concerning trend removal in electrochemical noise measurements. Corros. Sci. 43 (2001) 341-352
56. Liu X., Zhang T., Shao Y., Meng G., and Wang F. Effect of alternating voltage treatment on the microstructure and corrosion resistance of stannate conversion coating on AZ91D alloy. Corros. Sci. 51 (2009) 1772-1779