A study of the physical and tribological properties of biobased polymer-clay nanocomposites at different clay concentrations

Wear

Volumn 268, Issue 5-6, 2010, Pages 797-802

  Bhuyan, S ^a   Sundararajan, S ^a   Lu, Y ^b   Larock, R C ^b  

^a Iowa State University   (United States)

^b IOWA STATE UNIVERSITY   (United States)

Author keywords

Biopolymer; Friction; Polymer matrix composite; Scanning electron microscopy; Sliding wear

Indexed keywords

BALL ON FLATS; BIO-BASED POLYMERS; BIOBASED; CATIONIC COPOLYMERIZATION; CLAY CONCENTRATION; CONCENTRATION OF; CONE ANGLE; CONTACT PROFILOMETRY; DEFORMATION MECHANISM; DRY SLIDING; FIXED NORMAL LOAD; FRICTION AND WEAR BEHAVIORS; FRICTION BEHAVIOR; MICRO-SCALES; MICROTRIBOMETER; NORMAL LOADS; ORGANO-MODIFIED MONTMORILLONITES; REINFORCING PHASE; SINGLE STROKE; SLIDING WEAR; SOYBEAN OIL; TRIBOLOGICAL PROPERTIES; WEAR TRACKS;

BIOMOLECULES; CLAY MINERALS; FRICTION; MARTENSITIC STAINLESS STEEL; NANOCOMPOSITES; PROBES; SCANNING; SCANNING ELECTRON MICROSCOPY; SILICATE MINERALS; STYRENE; TRIBOLOGY; WEAR OF MATERIALS;

POLYMER MATRIX COMPOSITES;

EID: 74649083830     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.12.021     Document Type: Article

References (37)

1. Brown R.C. Biorenewable Resources: Engineering New Products from Agriculture. 1st ed. (2003), Iowa State Press, Ames
2. Kim S., and Dale B.E. Global potential bioethanol production from wasted crops and crop residues. Biomass Bioenergy 26 4 (2004) 361-375
3. Kim S., and Dale B. Allocation procedure in ethanol production system from corn grain. I. System expansion. Int. J. Life Cycle Assess. 7 4 (2002) 237-243
4. Adhvaryu A., Erhan S.Z., and Perez J.M. Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants. Wear 257 3-4 (2004) 359-367
5. Bhuyan S., Sundararajan S., Yao L., Hammond E.G., and Wang T. Boundary lubrication properties of lipid-based compounds evaluated using microtribological methods. Tribol. Lett. 22 2 (2006) 167-172
6. Biresaw G. Biobased dry-film metalworking lubricants. J. Synth. Lubr. 21 1 (2004) 43-58
7. Li F., Hanson M.V., and Larock R.C. Soybean oil-divinylbenzene thermosetting polymers: synthesis, structure, properties and their relationships. Polymers 42 (2001) 1567-1579
8. Park S.-J., Jin F.-L., Lee J.-R., and Shin J.-S. Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts. Eur. Polym. J. 41 2 (2005) 231-237
9. Li F., and Larock R. Synthesis, structure and properties of new tung oil-styrene-divinylbenzene copolymers prepared by thermal polymerization. Biomacromolecules 4 (2003) 1018-1025
10. Bhuyan S., Sundararajan S., Holden L.S., Andjelkovic D., and Larock R. Effect of crosslinking on the friction and wear behavior of soy-bean oil-based polymeric materials. Wear 263 (2007) 965-973
11. Lu Y., and Larock R.C. Corn oil-based composites reinforced with continuous glass fibers: fabrication and properties. J. Appl. Polym. Sci. 102 4 (2006) 3345-3353
12. Lu Y., and Larock R.C. Novel biobased nanocomposites from soybean oil and functionalized organoclay. Biomacromolecules 7 9 (2006) 2692-2700
13. Pfister D., Baker J.R., Henna P.H., Lu Y., and Larock R.C. Preparation and properties of tung oil-based composites using spent germ as a natural filler. J. Appl. Polym. Sci. 108 (2008) 3618-3625
14. Sinha-Ray S., and Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog. Polym. Sci. 28 11 (2003) 1539-1641
15. Giannelis E.P. Polymer layered silicate nanocomposites. Adv. Mater. 8 1 (1996) 29-35
16. Weon J.-I., and Sue H.-J. Effects of clay orientation and aspect ratio on mechanical behavior of nylon-6 nanocomposite. Polymers 46 (2005) 6325-6334
17. Tianxi Liu W.C., Tjiu Y., Tong C., He S.S., and Goh Chung T.-S. Morphology and fracture behavior of intercalated epoxy/clay nanocomposites. J. Appl. Polym. Sci. 94 3 (2004) 1236-1244
18. Basara C., Yilmazer U., and Bayram G. Synthesis and characterization of epoxy based nanocomposites. J. Appl. Polym. Sci. 98 3 (2005) 1081-1086
19. Lee A., and Lichtenhan J.D. Thermal and viscoelastic property of epoxy-clay and hybrid inorganic-organic epoxy nanocomposites. J. Appl. Polym. Sci. 73 10 (1999) 1993-2001
20. Park H.M., Liang X., Mohanty A.K., Misra M., and Drzal L.T. Effect of compatibilizer on nanostructure of the biodegradable cellulose acetate/organoclay nanocomposites. Macromolecules 37 24 (2004) 9076-9082
21. Dai X., Xu J., Guo X., Lu Y., Shen D., Zhao N., Luo X., and Zhang X. Study on structure and orientation action of polyurethane nanocomposites. Macromolecules 37 15 (2004) 5615-5623
22. Chen J.-S., Mark Poliks D., Christopher Ober K., Yuanming Z., Wiesner U., and Giannelis E. Study of the interlayer expansion mechanism and thermal-mechanical properties of surface-initiated epoxy nanocomposites. Polymers 43 (2002) 4895-4904
23. Dubois P., and Alexandre M. Performant clay/carbon nanotube polymer nanocomposites. Adv. Eng. Mater. 8 3 (2006) 147-154
24. Burris D.L., Boesl B., Bourne G.R., and Sawyer W.G. Polymeric nanocomposites for tribological applications. Macromol. Mater. Eng. 292 (2007) 387-402
25. Bahadur S. The development of transfer layers and their role in polymer tribology. Wear 245 1-2 (2000) 92-99
26. Xue Q.-J., and Wang Q.-H. Wear mechanisms of polyetheretherketone composites filled with various kinds of SiC. Wear 213 1-2 (1997) 54-58
27. Felhos D., Prehn R., Varadi K., and Schlarb A.K. FE simulation of the indentation deformation of SiC modified vinylester composites in respect to their abrasive wear performance. Express Polym. Lett. 2 10 (2008) 705-717
28. Sawyer W.G., Freudenberga K.D., Bhimaraj P., and Schadler L.S. A study on the friction and wear behavior of PTFE filled with alumina nanoparticles. Wear 254 1-2 (2003) 573-580
29. Check J., Karuppiah K.S.K., and Sundararajan S. Comparison of the effect of surface roughness on the micro/nanotribological behavior of ultra-high-molecular weight polyethylene (UHMWPE) in air and bovine serum solution. J. Biomed. Mater. Res. A 74A 4 (2005) 687-695
30. Kinsella M.E., Lilly B., Gardner B.E., and Jacobs N.J. Experimental determination of friction coefficients between thermoplastics and rapid tooled injection mold materials. Rapid Prototyp. J. 11 3 (2005) 167-173
31. Xue Y., Wu W., Jacobs O., and Schädel B. Tribological behaviour of UHMWPE/HDPE blends reinforced with multi-wall carbon nanotubes. Polym. Test. 25 2 (2006) 221-229
32. Felhös D., Karger-Kocsis J., and Xu D. Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steel. J. Appl. Polym. Sci. 108 5 (2008) 2840-2851
33. Dasari A., Yu Z.-Z., and Mai Y.-W. Nanoscratching of nylon 66-based ternary nanocomposites. Acta Mater. 35 2 (2007) 635-646
34. Xiang C., Sue H.J., Chu J., and Coleman B. Scratch behavior and material property relationship in polymers. J. Polym. Sci., B: Polym. Phys. 39 1 (2001) 47-59
35. Bhimaraj P., Burris D.L., Action J., Sawyer W.G., Toney C.G., Siegel R.W., and Schadler L.S. Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate composites. Wear 258 9 (2005) 1437-1443
36. Hokkirigawa K., and Kato K. An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear. Tribol. Int. 21 1 (1988) 51-57
37. Bhushan B. Principles and Application of Tribology (1999), John Wiley & Sons, Inc., New York