Effect of temperature on the frictional behaviour of an aluminium alloy sliding against steel during ball-on-disc tests

Tribology International

Volumn 43, Issue 1-2, 2010, Pages 299-306

  Wang, L ^a   He, Y ^a   Zhou, J ^a   Duszczyk, J ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Ball on disc test; Extrusion; FE simulation; Friction coefficient

Indexed keywords

7475 ALUMINIUM ALLOY; ALUMINIUM ALLOYS; ALUMINIUM EXTRUSIONS; BALL-ON-DISC TEST; BALL-ON-DISC TESTS; CONTACT POINTS; EFFECT OF TEMPERATURE; ELEVATED TEMPERATURE; FE-SIMULATION; FINITE-ELEMENT; FRICTION BEHAVIOUR; FRICTION COEFFICIENTS; FRICTION VALUES; HIGH TEMPERATURE; HOT EXTRUSION; PLOWING FRICTION; RISING TEMPERATURES; SEVERE DEFORMATION; STRAIN STATE; STRESS AND STRAIN DISTRIBUTION; STRESS STATE; TEMPERATURE EVOLUTION; WEAR DEBRIS; WEAR TRACKS;

ALUMINUM; ALUMINUM ALLOYS; DEBRIS; DEFORMATION; END EFFECTORS; EXTRUSION; EXTRUSION DIES; HIGH ENERGY FORMING; IRON ALLOYS; MARTENSITIC STAINLESS STEEL; SPHERES; STRAIN; TEMPERATURE; TESTING; THREE DIMENSIONAL; TRIBOLOGY;

FRICTION;

EID: 74349127585     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2009.06.009     Document Type: Article

References (34)

1. Fitta I, Sheppard T. On the mechanics of friction during the extrusion process. In: Proceedings of the seventh aluminium extrusion technology seminar, vol. I, 2000. p. 197-203.
2. Chanda T., Zhou J., Kowalski L., and Duszczyk J. 3D FEM simulation of the thermal events during AA6061 aluminium extrusion. Scripta Materialia 41 2 (1999) 195-202
3. Velay X., Duan X., and Sheppard T. Prediction of material flow pattern in the hot extrusion of aluminium alloys by the finite element method. Materials Science Forum 426-432 (2003) 3807-3812
4. Flitta I., and Sheppard T. Nature of friction in extrusion process and its effect on material flow. Materials Science and Technology 19 (2003) 837-846
5. Flitta I., and Sheppard T. Material flow during the extrusion of simple and complex cross-sections using FEM. Materials Science and Technology 21 (2005) 648-656
6. Schikorra M., Donati L., Tomesani L., and Kleiner M. The role of friction in the extrusion of AA6060 aluminum alloy, process analysis and monitoring. Journal of Materials Processing Technology 191 (2007) 288-292
7. Welo T, Abtahi S, Skauvik I, Støren S, Melander M, Tjøtta S. Friction in the bearing channel of aluminium extrusion dies. In: Proceedings of 15th Riso international symposium on materials science, Roskilde, Denmark, 1994. p. 615-20.
8. Tverlid S. Modelling of friction in the bearing channel of dies for extrusion of aluminium sections. Dissertation thesis, Norwegian University of Science and Technology, Trondheim; 1997. p. 147.
9. Tan X., Bay N., and Zhang W. Friction measurement and modelling in forward rod extrusion tests. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology 217 (2003) 71-82
10. Wagener H W., and Wolf J. Coefficient of friction in cold extrusion. Journal of Materials Processing Technology 44 (1994) 283-291
11. Thedja WW, Müller KB, Ruppin D. Tribomechanical process on the die land area during extrusion of AA6063 alloy. In: Proceedings of the fifth international aluminium extrusion technology seminar, vol. II, 1992. p. 467-74.
12. Bakhshi-Jooybari M. A theoretical and experimental study of friction in metal forming by the use of the forward extrusion process. Journal of Materials Processing Technology 125-126 (2002) 369-374
13. Björk T., Bergström J., and Hogmark S. Tribological simulation of aluminium hot extrusion. Wear 224 (1999) 216-225
14. Bhushan B. Introduction to tribology (2002), Wiley, New York p. 207-80
15. Rabinowicz E. Friction and wear of materials. 2nd ed (1995), Wiley, New York p. 65
16. Suh N.P. Tribophysics (1986), Prentice-Hall, Englewood Cliffs, NJ p. 63
17. Sheppard T. Extrusion of aluminium alloys (1999), Kluwer Academic Press, Dordrecht p. 6
18. Li L., Zhou J., and Duszczyk J. A 3D FEM simulation study on the isothermal extrusion of a 7075 aluminium billet with a predetermined non-linear temperature distribution. Modelling and Simulation in Materials Science and Engineering 11 (2003) 401-416
19. Zhou J., Li L., and Duszczyk J. Computer simulated and experimentally verified isothermal extrusion of 7075 aluminium through continuous ram speed variation. Journal of Materials Processing Technology 146 (2004) 203-212
20. Yoneyama T. Development of a new pressure sensor and its application to the measurement of contacting stress in extrusion. Journal of Materials Processing Technology 95 (1999) 71-77
21. Mori T., Takatsuji N., Matsuki K., Aida T., Murotani K., and Uetoko K. Measurement of pressure distribution on die surface and deformation of extrusion die in hot extrusion of 1050 aluminum rod. Journal of Materials Processing Technology 130-131 (2002) 421-425
22. Sallit I., Richard C., Adam R., and Robbe-Valloire F. Characterization methodology of a tribological couple metal matrix composite/brake pads. Materials Characterization 40 (1998) 169-188
23. Eriksson M., Bergman F., and Jacobson S. On the nature of tribological contact in automotive brakes. Wear 252 (2002) 26-36
24. p composites/automobile brake pad system under dry sliding conditions. Tribology International 40 (2007) 365-373
25. Konca E., Cheng Y.-T., Weiner A.M., Dasch J.M., Erdemir A., and Alpas A.T. Transfer of 319 Al alloy to titanium diboride and titanium nitride based (TiAlN, TiCN, TiN) coatings: effects of sliding speed, temperature and environment. Surface & Coatings Technology 200 (2005) 2260-2270
26. Benabdallah H., and Olender D. Finite element simulation of the wear of polyoxymethylene in pin-on-disc configuration. Wear 261 (2006) 1213-1224
27. Pluijms GJ. Flow stress characterization of aluminum alloys in warm and hot working conditions. Master's thesis, Delft University of Technology, Delft, the Netherlands; November 2008.
28. Mitchell I. Residual stress reduction during quenching of wrought 7075 aluminium alloy. Dissertation thesis, Worcester Polytechnic Institute; 2004. p. 26.
29. Liang Y.N., Li S.Z., Li D.F., and Li S. Some developments for single-pass pendulum scratching. Wear 199 (1996) 66-73
30. Subhash G., and Zhang W. Investigation of the overall friction coefficient in single-pass scratch test. Wear 252 (2002) 123-134
31. Kamminga J.D., and Janssen G.C.A.M. Experimental discrimination of plowing friction and shear friction. Tribology Letters 25 (2007) 149-152
32. Farhat Z.N. Contribution of crystallographic texturing to the sliding friction behaviour of fcc and hcp metals. Wear 250 (2001) 401-408
33. Zanoria E., Danyluk S., and McNallan M. Effects of length diameter and population density of tribological rolls on friction between self-mated silicon. Wear 181-183 (1995) 784-789
34. Hardell J., Kassfeldt E., and Prakash B. Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 °C. Wear 264 (2008) 788-799