Friction measurement and modelling in forward rod extrusion tests

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 217, Issue 1, 2003, Pages 71-82

  Tan, X ^a   Bay, N ^a   Zhang, W ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Friction measurement; Friction modelling; Lubrication; Metal forming

Indexed keywords

DEFORMATION; FRICTION; LUBRICATION; STRESS ANALYSIS;

FORWARD ROD EXTRUSION;

METAL EXTRUSION;

EXTRUSION; FORMING; FRICTION; LUBRICATION; ROD;

EID: 0037219575     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/135065003321164811     Document Type: Article

References (49)

1. Schey, J. A. Tribology in Metalworking: Friction, Lubrication and Wear, 1983 (American Society for Metals, Metals Park, Ohio).
2. Kalpakjian, S. Recent progress in metal forming tribology. Ann. CIRP, 1985, 34(2), 585-592.
3. Bay, N. Friction and adhesion in metal forming and cold welding. DSc thesis, publication MM.85.43. Institute of Manufacturing Engineering, Technical University of Denmark, Lyngby, 1985.
4. Kawai, N. and Dohda, K. Development of tribology in metal forming. JSME Int. J., 1987, 30, 1018-1025.
5. Lenard, J. G. Tribology in metal rolling, keynote paper. Ann. CIRP, 2000, 49(2), 567-590.
6. Unksov, E. P. An Engineering Theory of Plasticity, 1961 (Butterworths, London).
7. Van Rooyen, G. T. and Backofen, W. A. A study of interface friction in plastic compression. Int. J. Mech. Sci., 1960, 1, 1-27.
8. Danckert, J. Modelmaterialeteknik (Model material technique). PhD thesis, publication MM77.23, Department of Mechanical Processing of Materials, Technical University of Denmark, Lyngby, 1977.
9. Baillet, L. and Boyer, J. C. Experimental results of the friction stress distribution for the upsetting of cylinders. In Simulation of Materials Processing: Theory, Methods and Application, Proceedings of the Fifth International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM'95) (Eds S. F. Shen and P. R. Dawson), 1995, pp. 209-214 (Balkema, Rotterdam).
10. Yoneyama, T. Direct measurement of stress and heat between work and tool in metal forming. Ann. CIRP, 1990, 39(1), 219-222.
11. Al-Salehi, F. A. R., Firbank, T. C. and Lancaster, P. R. An experimental determination of the roll pressure distributions in cold rolling. Int. J. Mech. Sci., 1973, 15, 693-710.
12. Lenard, J. G. An experimental study of boundary conditions in hot and cold flat rolling. Ann. CIRP, 1990, 39(1), 279-282.
13. Jeswiet, J. A sensor for measuring metal deformation interface forces. J. Mater. Processing Technol., 1993, 39, 251-268.
14. Peterson, M. B. and Ling, F. F. Friction and lubrication at extreme pressure. In Friction and Lubrication in Metal Processing (Eds F. F. Ling et al.), 1966, pp. 39-68 (ASME, New York).
15. Pawlov, I. M. and Kostytschew, P. S. Grundlagen der Metallverformung durch Druck, 1954, pp. 654-665 (Technik, Berlin).
16. Gräbener, T. Entwicklung und anwendung neuer schmierstoffprüfverfahren für die kaltmassivumformung, Universität Stuttgart, 1983 (Springer, Berlin).
17. Nittel, J. Neues verfahren zur schmierstoffprüfung in der umformtechnik durch reibwertmessung. Fertigungstech. Betr., 1968, 18, 301-304.
18. Nakamura, T., Urata, A. and Kato, K. Investigation into seizure mechanism by means of extrusion-type friction testing machine. In Advanced Technology of Plasticity 1984, Proceedings of the First International Conference on Technology of Plasticity, Tokyo, 1984, Vol. 1, pp. 267-272.
19. Saga, J., Nojima, H. and Arita, K. Effect of lubrication upon coefficient of friction and surface feature under high contact pressure (in Japanese). J. Japan Soc. Technol. Plasticity, 1975, 16, 398-404.
20. Andreasen, J. L. and Bay, N. Quantification of galling in sheet metal forming by surface topography characterisation. Int. J. Machine Tools Mfg, 1998, 38(5-6), 503-510.
21. Dohda, K. and Kawai, N. Correlation among tribological indices for metal forming. Lubrication Engng, 1990, 36, 727-734.
22. Saiki, H., Ngaile, G., Ruan, L. and Asakawa, M. New tribo-test for cold forging processes by localized rod- drawing method. In Advanced Technology of Plasticity 1996, Proceedings of the Fifth International Conference on Technology of Plasticity, Columbus, Ohio, 1996, Vol. 1, pp. 343-346.
23. Veiler, S. Y. and Likhtman, V. I. The Action of Lubricants in Pressure Working of Metals, 1960 (Izdatelstvo Akademii Nauk SSSR, Moscow) (translation: Rep. MCL-1389/1+2, WPAFB, Ohio, 1961).
24. Fukui, S., Ohi, T., Kudo, H., Takita, F. and Seino, J. Some aspects of friction in metal-strip drawing. Int. J. Mech. Sci., 1962, 4, 297-311.
25. Wanheim, T. Friction at high normal pressures. Wear, 1973, 25, 225-244.
26. Shaw, M. C., Ber, A. and Mamin, P. A. Friction characteristics of sliding surfaces undergoing subsurface plastic flow. Trans. ASME, J. Basic Engng, 1960, 82, 342-346.
27. Schey, J. A. Dry friction in hot metalworking. In Friction and Lubrication in Metal Processing (Eds F. F. Ling et al.), 1966, pp. 20-38 (ASME, New York).
28. Underwood, L. R. The Rolling of Metals, 1950 (John Wiley, New York).
29. Bay, N. and Hansen, B. G. Simulation of friction and lubrication in cold forging. In Seventh International Congress on Cold Forging, Birmingham, 1985, pp. 55-62.
30. Hansen, B. G. and Bay, N. Two new methods for testing lubricants for cold forging. J. Mech. Working Technol., 1986, 13, 189-204.
31. Siebel, E. Der derzeitige Stand der Erkenntnisse über die mechanischen vorgänge beim Drahtziehen. Stahl Eisen, 1947, 66-67, 171-180.
32. Feltham, P. Extrusion of metals. Metal Treatment Drop Forging, 1956, 23, 440-444.
33. El-Behery, A. M., Lamble, J. H. and Johnson, W. The measurement of container wall pressure and friction coefficient in axi-symmetric extrusion. In Advances in Machine Tool Design and Research, Proceedings of Fourth International Machine Tool Design and Research Conference, 1963, 1964, pp. 319-335 (Macmillan, New York).
34. Perlmutter, I., DePierre, V. and Pierce, C. M. Lubrication as a parameter in the extrusion of metals. In Friction and Lubrication in Metal Processing (Eds F. F. Ling et al.), 1966, pp. 147-161 (ASME, New York).
35. Shaw, H. L., Boulger, F. W. and Lorig, C. H. Development of die lubricants for forging and extruding ferrous and monferrous materials. Summary Report on Contract AF33(600)-26272, Battelle Memorial Institute, Colombus, Ohio, 1955.
36. Oei, H. Y. Adhesion strength of phosphate coatings in cold forming. In Advanced Technology of Plasticity 1987, Proceedings of the Second International Conference on Technology of Plasticity, Stuttgart, 1987, Vol. 2, pp. 893-899.
37. Bay, N., Lassen, S., Pedersen, K. B. and Maegaard, V. Lubrication limits in backward can extrusion. Ann. CIRP, 1991, 40(1), 233-242.
38. Haddow, J. B. and Chudobiak, J. M. An experimental study of axially symmetric inverted extrusion and piercing Can. Metall. Q., 1963, 2, 325-340.
39. Gouveia, B. P. P. A., Rodrigues, J. M. C. and Martins, P. A. F. Finite element modelling of cold forward extrusion using updated Lagrangian and combined Eulerian- Lagrangian formulations. J. Mater. Processing Technol., 1998, 80-81, 647-652.
40. Avitzur, B. Handbook of Metal Forming Processes, 1983 (Wiley-Interscience, New York).
41. Lange, K. Handbook of Metal Forming, 1985 (McGraw- Hill, New York).
42. Metals Handbook, Vol. 14, Forming and Forging, 9th edition, 1988, pp. 315-316 (American Society of Metals, Metals Park, Ohio).
43. Wagener, H. W. and Wolf, J. Coefficient of friction in cold extrusion. J. Mater. Processing Technol., 1994, 44, 283-291.
44. Wibom, O. Tribnologiske forhold i koldflydepresning af rustfaste stål (Tribology in cold forging of stainless steel). PhD thesis, Publication MM98.28, IPT, Technical University of Denmark, Lyngby, 1998.
45. Bay, N. Surface stresses in cold forward extrusion. Ann. CIRP, 1983, 32(1), 195-199.
46. Nielsen, L. S., Lassen, S., Andersen, C. B., Grønbæk, J. and Bay, N. Development of a flexible tool system for small quantity production in cold forging. J. Mater. Processing Technol., 1997, 71, 36-42.
47. ICFG Document 8/91 - Lubrication aspects in cold forging of carbon steels and low alloy steels. In International Cold Forging Group 1967-92: Objects, History, published documents, 1992, pp. 93-103 (Meisenbach GmbH, Bamberg).
48. Bay, N. The state of the art in cold forging lubrication. J. Mater. Processing Technol., 1994, 46, 19-40.
49. Bay, N., Eriksen, M., Tan, X. and Wibom, O. An empirical model for friction in cold forging, keynote paper. In Euromech 435 Colloquium. FWMF (Friction and Wear in Metal Forming), 18-20 June 2002, University of Valenciennes, Valenciennes, France.